SANODESK Electric Standing Desk (Model: B09QBV1Q4H) Instruction Manual

1. Product Overview

The SANODESK Electric Standing Desk is designed to provide a versatile and ergonomic workspace. It features adjustable height settings, a spacious desktop, and a sturdy construction suitable for home office environments.

Key features include:

• Spacious Desktop: 48" x 24" surface for work, gaming, and office supplies.
• Quiet Height Adjustable System: Smooth height adjustments from 28.6" to 48.2" at 1" per second, with noise below 50 dB.
• Sturdy Construction: Industrial-grade steel frame and solid desktop supporting up to 132 lbs.
• Ergonomic Design: Promotes an active and healthy work environment by allowing seamless transitions between sitting and standing.
• Easy Assembly: Designed for straightforward setup within one hour.

2. Parts List

Before assembly, verify that all components are present and undamaged. Refer to the following image for a visual representation of the included parts.

If any parts are missing or damaged, please contact customer support.

3. Assembly Instructions

Follow these steps to assemble your SANODESK Electric Standing Desk. It is recommended to have a clear workspace and refer to the provided video for visual guidance.

1. Install Desk Feet: Attach the desk feet to the bottom of the leg columns using the provided screws and Allen wrench. Ensure they are securely fastened.
2. Install Transmission Rod: Insert the transmission rod into the designated openings in the leg columns. Tighten the connection points as shown in the video.
3. Install Crossbeam: Secure the crossbeam between the two leg columns using the appropriate screws.
4. Install Support Plates: Attach the support plates to the top of the leg columns, ensuring they are aligned correctly to support the desktop.
5. Connect Desktop: Carefully place the desktop sections onto the support plates. Align the pre-drilled holes.
6. Install Adapter Holder, Desktop, and Keypad: Secure the adapter holder, desktop sections, and the control keypad to the underside of the desk using the provided screws.
7. Install Baffles and Adapter: Attach any baffles or cable management components, and secure the power adapter.
8. Install and Sort out Power Cord: Connect the power cord and organize cables using the provided cable ties or management solutions.

4. Operating Instructions

The SANODESK Electric Standing Desk features an intuitive control panel for height adjustment. The desk can be adjusted between 28.6 inches and 48.2 inches.

4.1. Height Adjustment

Locate the control keypad, typically mounted on the underside of the desktop. It features "UP" and "DOWN" buttons.

• To raise the desk: Press and hold the UP button until the desired height is reached.
• To lower the desk: Press and hold the DOWN button until the desired height is reached.

The desk will move smoothly at approximately 1 inch per second, with minimal noise.

5. Maintenance

To ensure the longevity and optimal performance of your SANODESK Electric Standing Desk, follow these maintenance guidelines:

• Cleaning: Wipe the desktop and frame with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• Cable Management: Periodically check and organize cables to prevent tangles and ensure smooth operation during height adjustments.
• Weight Capacity: Do not exceed the maximum weight capacity of 132 lbs to prevent damage to the motor and frame.
• Regular Checks: Occasionally inspect all screws and connections to ensure they remain tight. Retighten if necessary.

6. Troubleshooting

If you encounter issues with your electric standing desk, refer to the following common troubleshooting steps:

6.1. Desk Not Adjusting Height

If the desk motor responds to the DOWN button but not the UP button, or if the desk is unresponsive:

1. Power Cycle: Unplug the power adapter from the wall outlet and the desk control box. Wait for at least 30 seconds.
2. Reconnect Power: Plug the power adapter back into the desk control box and then into the wall outlet.
3. Reset Procedure: Press and hold both the UP and DOWN buttons on the control keypad simultaneously for 5 seconds. This should initiate a reset.
4. Check Connections: Ensure all cables, especially those connecting the motor, control box, and keypad, are securely plugged in.

If the issue persists after these steps, please contact SANODESK customer support for further assistance.

7. Specifications

8. Warranty and Support

For information regarding product warranty, returns, or technical support, please refer to the documentation included with your purchase or visit the official SANODESK website. You may also contact SANODESK customer service directly for assistance.

For customer support, please visit the SANODESK Store on Amazon.