1. Introduction
This manual provides essential instructions for the proper setup, operation, and maintenance of your SIG SAUER KILO10K-ABS HD 10x42mm Laser Rangefinder Binoculars. Please read this manual thoroughly before using the device to ensure safe and effective operation.
Image 1.1: Front view of the SIG SAUER KILO10K-ABS HD 10x42mm Laser Rangefinder Binoculars.
2. Package Contents
Verify that all items are present in your package:
- KILO10K-ABS HD 10x42mm Laser Rangefinder Binoculars
- Multicam Chest Carry Harness
- WeatherFlow Bluetooth WindMETER
- CR2 Battery
- Lens Cloth
- Quick Start Guide
3. Setup
3.1 Battery Installation
- Locate the battery compartment on the device.
- Unscrew the battery cap.
- Insert one (1) CR2 battery, ensuring correct polarity (+/-).
- Securely replace the battery cap.
3.2 Diopter Adjustment
Adjust the diopter to achieve a clear focus for your individual eyesight. Rotate the diopter adjustment ring (typically located near the right eyepiece) until the reticle and image appear sharp.
3.3 BDX App Configuration and BaseMap Integration
The KILO10K-ABS is fully configurable via the SIG SAUER BDX App. Download the app to your smartphone or tablet to unlock advanced ballistic features and integrate with BaseMap for remote waypoint marking.
- Download the SIG SAUER BDX App from your device's app store.
- Enable Bluetooth on your KILO10K-ABS and your smart device.
- Open the BDX App and follow the on-screen instructions to pair your device.
- Once paired, you can configure ballistic profiles and utilize BaseMap integration to mark distant targets.
Image 3.1: Top view of the binoculars showing the RANGE and MODE buttons.
Image 3.2: View of the binoculars showing the central focus wheel and diopter adjustment.
Image 3.3: Detail of the eyepiece and diopter adjustment ring.
Image 3.4: Illustration of connecting the rangefinder to the BaseMap app for remote waypoint marking.
4. Operating Instructions
4.1 Powering On and Basic Ranging
Press the RANGE button to power on the device and initiate a range measurement. The display will illuminate, showing the measured distance to your target.
4.2 Display Information
The Active Matrix Light-Emitting Graphic Display provides comprehensive ballistic information:
- Range to Target
- Elevation Holdover
- Wind Hold
- Energy on Target
- Velocity at Target Distance
Image 4.1: Example of the KILO10K display with reticle and ballistic data overlay.
4.3 Ranging Modes
Use the MODE button to cycle through available ranging modes:
- Extended Range (XR) Mode: Optimized for ranging distant targets.
- Fog Mode: Improves ranging performance in adverse weather conditions such as fog or light rain.
- BDX 2.0: Enables advanced ballistic calculations and communication with BDX-compatible devices.
4.4 BDX 2.0 and External Device Connectivity
The KILO10K-ABS features BDX 2.0 for seamless integration with other BDX-enabled devices. It also supports BDX External (BDX-X) for connecting to external devices like Kestrel and Garmin units, allowing for real-time environmental data input for precise ballistic solutions.
4.5 Environmental Sensors and Digital Compass
On-board environmental sensors and a digital compass provide crucial data for accurate ballistic calculations, including temperature, pressure, and humidity, as well as directional information.
5. Maintenance
5.1 Cleaning
To clean the lenses, use the provided lens cloth or a soft, lint-free cloth. For stubborn smudges, a small amount of lens cleaning fluid designed for optics can be applied to the cloth, not directly to the lens. Wipe gently in a circular motion.
Clean the exterior of the binoculars with a soft, damp cloth. Avoid abrasive materials or harsh chemicals.
5.2 Storage
Store the binoculars in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the lens caps are in place to protect the optics from dust and scratches. Remove the battery if storing for extended periods to prevent leakage.
5.3 Waterproofing
The KILO10K-ABS has an IPX-4 waterproof rating, meaning it is resistant to splashing water from any direction. While it can withstand light rain, it is not designed for submersion. Ensure all caps and covers are securely closed to maintain water resistance.
6. Troubleshooting
- Device does not power on:
Check battery installation and ensure the CR2 battery is fresh and correctly oriented. - Inaccurate range readings:
Ensure the target is within the specified range capabilities. Verify that the lenses are clean and free from obstructions. Environmental factors like heavy fog or rain can affect accuracy; try using Fog Mode if applicable. - Display is dim or unclear:
Adjust the diopter for your eyesight. Check battery level. The display brightness may automatically adjust to ambient light conditions. - Cannot connect to BDX App:
Ensure Bluetooth is enabled on both the binoculars and your smart device. Restart both devices and try pairing again. Make sure the BDX App is updated to the latest version.
7. Specifications
Image 7.1: Detailed specifications for the KILO10K-ABS HD 10x42mm.
| Feature | Specification |
|---|---|
| Model Number | SOK10K11 |
| Magnification | 10x |
| Objective Lens Diameter | 42 mm |
| Field of View | 6.1° |
| Eye Relief | 18 mm |
| Overall Length | 5.7 in |
| Height | 2.5 in |
| Overall Width | 5 in |
| Weight | 32 oz (2 lbs) |
| Laser Divergence | 1.5 x 0.06 MRAD |
| Waterproofing | IPX-4 |
| Battery Type | (1) CR2 |
| Run Time | Approx. 4000 ranges |
| Diopter Adjustment Range | +/- 3 |
| Color | FDE (Flat Dark Earth) |
| Reticle | Circle, Duplex, Box & Milling Grid |
| Display Type | 304 x 256 ACTIVE MATRIX OLED |
| Range on Deer | Up to 3000 y |
| Range on Trees | Up to 4000 y |
| Max Reflective Range | Up to 10000 y |
8. Warranty and Support
SIG SAUER products are manufactured to the highest standards and are backed by a limited warranty. For specific warranty details, registration, and support inquiries, please refer to the official SIG SAUER website or contact their customer service directly. Keep your proof of purchase for warranty claims.
