maXpeedingrods KJ1143

maXpeedingrods 2.5" Full Lift Kit Instruction Manual

For Jeep Wrangler JL (2018-2023) - Model KJ1143

1. Product Overview

The maXpeedingrods 2.5" Full Lift Kit is designed to enhance the ground clearance and aesthetic appeal of your Jeep Wrangler JL. This kit provides a 2.5-inch lift to both the front and rear of the vehicle, allowing for the installation of larger tires, up to 35 inches, and improving off-road performance.

The lift kit is engineered to provide better stability and handling, particularly on rough terrain, and aims to reduce noise when encountering bumps. It is constructed from high-grade, powder-coated materials to resist corrosion and rust, ensuring durability.

Before and after comparison of a Jeep Wrangler JL with and without the 2.5 inch lift kit installed, showing increased ground clearance.

Image 1: Visual comparison of a Jeep Wrangler JL before and after the 2.5-inch lift kit installation, highlighting the increased ride height.

2. Package Contents

Please verify that all components listed below are present in your package before beginning installation.

Detailed layout of all components included in the maXpeedingrods 2.5 inch Full Lift Kit, showing coil spring spacers, shock relocation brackets, sway bar end links, bump stops, spacer plates, and hardware.

Image 2: A comprehensive view of all components included in the lift kit, neatly arranged for identification.

  • 4 x Coil Spring Spacers
  • 4 x Shock Relocation Brackets
  • 4 x Sway Bar End Links
  • 4 x Bump Stops
  • 2 x Rear Spacer Plates
  • Bolts and Sleeves Hardware (various sizes)

3. Compatibility

This lift kit is compatible with:

  • Jeep Wrangler JL 2WD models (2018-2023)
  • Jeep Wrangler JL 4WD models (2018-2023)

4. Installation Guidelines

Important: Professional installation is highly recommended for this product. No detailed step-by-step instructions are included in this manual. Improper installation can lead to vehicle damage or safety hazards.

For detailed installation procedures, it is advised to consult a qualified automotive technician or refer to a comprehensive service manual for your specific Jeep Wrangler JL model. Ensure all safety precautions are followed, including proper vehicle support and use of appropriate tools.

After installation, it is crucial to perform a wheel alignment to ensure correct steering and tire wear.

5. Usage and Performance

Once correctly installed, the maXpeedingrods 2.5" Full Lift Kit will provide:

  • Increased ground clearance for improved off-road capability.
  • An aggressive vehicle stance, allowing for larger tire fitment (up to 35 inches).
  • Enhanced stability and handling during off-road driving.
  • Reduced noise when traversing uneven surfaces.

6. Maintenance

Regular vehicle maintenance practices should be followed. Periodically inspect all components of the lift kit for signs of wear, damage, or loose fasteners. Ensure that all bolts and nuts are torqued to the manufacturer's specifications. Keep components clean from excessive dirt and debris, especially after off-road use.

7. Troubleshooting

If you experience issues after installation, consider the following:

  • Rubbing: If tire rubbing occurs, especially between the front tire, lower control arm, and sway-bar links, double-check the clearance. This often indicates improper installation or incorrect tire/wheel sizing for the lift.
  • Unusual Noises: Investigate any new noises (clunking, squeaking) immediately. This could indicate loose components, improper seating of parts, or interference.
  • Steering Issues: If steering feels loose, heavy, or the vehicle pulls to one side, ensure a proper wheel alignment has been performed.

For persistent issues, contact maXpeedingrods customer support or a certified mechanic.

8. Specifications

FeatureSpecification
BrandmaXpeedingrods
Model NumberKJ1143
Auto Part PositionFront and Rear
Maximum Lifting Height2.5 Inches
MaterialHigh-Strength Carbon Steel (Powder Coated)
Item Weight28.4 pounds
Product Dimensions16.93 x 9.25 x 6.42 inches
Automotive Fit TypeVehicle Specific Fit (Jeep Wrangler JL 2018-2023)

9. Support and Warranty

For any questions regarding installation, troubleshooting, or product information, please contact maXpeedingrods customer support. While specific warranty details are not provided in this manual, please refer to your purchase documentation or the official maXpeedingrods website for warranty terms and conditions.

You can visit the maXpeedingrods store for more information: maXpeedingrods Store

10. Additional Resources

The following videos provide general information about maXpeedingrods products and their manufacturing process. They are not specific installation guides for this particular lift kit but offer insight into the brand's commitment to performance and quality.

maXpeedingrods: Focus on Performance

Video 1: This video showcases maXpeedingrods' dedication to performance, featuring various automotive parts, manufacturing processes, and vehicles in action. It highlights the brand's engineering and testing efforts.

maXpeedingrods LLK Series Overview

Video 2: This video provides an overview of the maXpeedingrods LLK Series, demonstrating the application and benefits of their lift kit products in various off-road scenarios. It illustrates how these kits enhance vehicle capability.