Product Overview
The Evenflo Gold SecureMax Infant Car Seat Base is designed to provide a secure and stable foundation for the Evenflo Gold SecureMax Infant Car Seat. It features a SafeZone Load Leg for enhanced stability and reduced crash forces, and is engineered for easy, tight installation. This base is an essential component for ensuring your child's safety during travel.
Safety Information
Your Evenflo Gold SecureMax Infant Car Seat Base has been rigorously tested to meet and exceed safety standards. The entire SecureMax line is rollover and side-impact tested, with structural integrity tested at 2X the energy levels of the federal crash test standard. The SafeZone Load Leg is designed to minimize car seat movement and can reduce rotations by up to 50% in the event of a frontal collision. Always read and follow all instructions and warnings provided in this manual and on the product labels.
Setup and Installation
Proper installation is crucial for the safety of your child. The SecureMax base offers a Fit-Loc seatbelt installation option for a tight, wiggle-free install. The SafeZone Load Leg provides additional stability and is tool-free for installation, supplementing your vehicle's LATCH system.
Image: The Evenflo Gold SecureMax Infant Car Seat Base, showing the extended SafeZone Load Leg for stability.
Image: The Evenflo Gold SecureMax Infant Car Seat Base with an infant car seat clicked into place, installed in a vehicle's back seat.
Installation Video Guide
Video: This video demonstrates the installation process of the Evenflo SecureMax Infant Car Seat Base with the Load Leg, including how to adjust the load leg and attach the infant car seat.
For detailed step-by-step instructions, please refer to the official user guide linked in the Support section.
Operating Instructions
Once the base is securely installed, the Evenflo Gold SecureMax Infant Car Seat (sold separately) can be easily clicked into place. The SecureMax system is equipped with SmartSafe technology, which provides real-time app alerts to your phone if dangerous conditions arise, such as the child getting too warm, being in the car seat for more than 2 hours, or becoming unbuckled.
Image: A close-up view of the SafeZone Load Leg mechanism, highlighting its stabilization features.
Image: An overhead view of the car seat base, displaying the various installation labels and indicators.
Maintenance and Care
Proper maintenance ensures the longevity and safety of your car seat base. Follow these guidelines for cleaning:
- Cleaning Instructions: DO NOT lubricate or immerse in water any part of this child restraint, unless rinsing is permitted.
- Plastic and Metal Parts: May be wiped clean with mild soap and water and dried with a soft cloth. Do not use abrasive cleaners or solvents. Take care not to damage any labels.
- Harness: Can be wiped clean with mild soap and water. Allow harness to air dry.
- Seat Pad: Machine wash separately in cold water, delicate cycle. Tumble dry 10 to 15 minutes on low heat.
- Crotch Buckle: Periodically inspect and clean the restraint's crotch buckle of food, liquids, and other debris to ensure proper latching. Place the buckle in a cup of warm water and gently agitate the buckle back and forth. Press the red button several times while the buckle is in the water. Do not submerge the harness strap. To avoid damage to the buckle, do not clean the buckle with soap or detergents and do not use a lubricant.
Always consult your vehicle owner's manual to determine proper placement of the child restraint in your vehicle and familiarize yourself with your vehicle's components.
Troubleshooting
If you encounter any issues with your Evenflo Gold SecureMax Infant Car Seat Base, please refer to the comprehensive user guide for detailed troubleshooting steps. Common issues often relate to installation tightness or proper engagement of the SafeZone Load Leg. Ensure all indicators are green for a correct installation.
- Base feels loose after installation: Re-check the Fit-Loc seatbelt installation or LATCH connection. Ensure the load leg is properly extended and locked into place.
- Infant car seat not clicking into base: Verify the car seat is correctly aligned with the base's connectors and push down firmly until you hear a click.
- SmartSafe alerts: Refer to the Evenflo Gold app for specific alert meanings and recommended actions.
Product Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 9 x 14 x 25 inches |
| Item Model Number | 6571000 |
| Maximum Weight Recommendation | 35 Pounds |
| Material Composition | 50% plastic, 50% metal |
| Item Weight | 13.62 pounds (6.19 Kilograms) |
| Installation Type | Seat Belt |
| Color | Black |
| Batteries Required | No |
Warranty and Support
For information regarding product warranty, please refer to the official Evenflo website or contact Evenflo customer service directly. Keep your proof of purchase for warranty claims.
For comprehensive instructions, safety warnings, and detailed troubleshooting, please download the official Instructions for Use (IFU) manual:
Download Official User Guide (PDF)
You can also visit the official Evenflo store for more product information and support:
