MOUNTO HEPA1000 HEPA Filter Replacement Manual

1. Introduction

This manual provides instructions for the MOUNTO HEPA1000 HEPA Filter Replacement, Model AF1000HF. This filter is specifically designed for use with the MOUNTO 1000 CFM Air Scrubber to ensure optimal air purification performance. Please read these instructions carefully before installation and maintenance to ensure proper function and longevity of your air scrubber and filter.

2. Product Features

• H14 HEPA Level Filtration: Captures 99.97% of airborne particles as small as 0.3 microns, ensuring superior air quality.
• Optimal Dimensions: Measures 16 inches (L) x 16 inches (W) x 6 inches (Th), providing a precise fit for the MOUNTO 1000 CFM Air Scrubber.
• Durable Construction: Made from high-quality PP filter material with an aluminum frame for enhanced durability and reduced leakage.
• High Air Volume Support: Designed to support high air volume throughput, contributing to efficient air scrubbing.
• Long Lifespan: Engineered for extended use, reducing the frequency of replacements.

3. Compatibility

The MOUNTO HEPA1000 HEPA Filter Replacement (Model AF1000HF) is exclusively compatible with the MOUNTO 1000 CFM Air Scrubber. Ensure your air scrubber model matches this specification for proper fit and function.

4. Installation Instructions

Follow these steps to safely replace the HEPA filter in your MOUNTO 1000 CFM Air Scrubber:

1. Power Off: Before beginning, ensure the MOUNTO 1000 CFM Air Scrubber is turned off and unplugged from the power source to prevent electrical hazards.
2. Locate Filter Compartment: Identify the filter access panel on your MOUNTO 1000 CFM Air Scrubber. This is typically secured with latches or screws.
3. Open Compartment: Carefully open or remove the filter access panel.
4. Remove Old Filter: Gently slide out the used HEPA filter. Note its orientation to ensure the new filter is installed correctly. Dispose of the old filter according to local regulations.


Image 1: Example of a HEPA filter, similar to the one being replaced. This image shows the filter's pleated structure and aluminum frame.

5. Insert New Filter: Unpack the new MOUNTO HEPA1000 HEPA Filter. Slide the new filter into the compartment, ensuring it is seated firmly and correctly oriented. The filter is designed for a slide-in mounting type.


Image 2: The new MOUNTO HEPA1000 HEPA filter, featuring a black gasket for a secure seal.

6. Secure Compartment: Close and secure the filter access panel. Ensure all latches or screws are fastened properly to prevent air leakage.
7. Restore Power: Plug the air scrubber back into the power source and turn it on. Verify proper operation.

5. Maintenance

Regular maintenance of your HEPA filter is crucial for maintaining optimal air quality and the efficiency of your MOUNTO 1000 CFM Air Scrubber.

• Filter Replacement Frequency: The HEPA filter should be replaced periodically, typically every 6 to 12 months, depending on usage intensity and environmental conditions. In dusty or high-particulate environments, more frequent replacement may be necessary. Refer to your MOUNTO 1000 CFM Air Scrubber's manual for specific filter indicator warnings.
• Disposal: Dispose of used filters responsibly according to local waste disposal guidelines.
• Cleaning: HEPA filters are not designed to be washed or cleaned. Attempting to clean the filter can damage its delicate structure and reduce its filtration effectiveness. Always replace with a new filter.

6. Troubleshooting

If you encounter issues after replacing your HEPA filter, consider the following:

• Reduced Airflow:
  • Ensure the new filter is correctly seated and fully inserted into the compartment.
  • Check that the filter access panel is securely closed and latched, preventing air leaks.
  • Verify that the pre-filter (if applicable to your air scrubber model) is clean and not clogged.
• Unusual Noises:
  • Confirm the filter is not vibrating against the housing. Re-seat the filter if necessary.
  • Ensure no foreign objects are trapped within the air scrubber's filter compartment.
• Air Scrubber Not Starting:
  • Double-check that the air scrubber is properly plugged into a functional power outlet.
  • Ensure the power switch is in the "ON" position.
  • Some air scrubbers have safety interlocks; ensure the filter compartment is fully closed and secured.

7. Specifications

8. Warranty and Support

For warranty information, technical support, or any questions regarding your MOUNTO HEPA1000 HEPA Filter Replacement or MOUNTO 1000 CFM Air Scrubber, please contact MOUNTO customer service. Refer to the original air scrubber manual or the MOUNTO official website for contact details.

Website: MOUNTO Official Store on Amazon