Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your ELAMOR M19 Keyless Entry Door Lock. This electronic deadbolt lock offers enhanced security and convenience for your home or apartment.
Key features include:
- Keyless entry with keypad.
- Support for up to 50 user codes and a master code.
- Automatic locking feature (adjustable from 3 to 30 seconds).
- Waterproof design (IP54 rated).
- Low-battery indicator.
- Mechanical keyed override for backup.
Image: Front and back view of the ELAMOR M19 Keyless Entry Door Lock in Oil Rubbed Bronze finish.
Package Contents
Before beginning installation, please verify that all components are present:
Image: All components included in the ELAMOR M19 Keyless Entry Door Lock package, including the keypad assembly, interior assembly, deadbolt latch, strike plate, buckle box, screws, and mechanical keys.
- Touch Keypad Assembly x 1
- Interior Assembly x 1
- Deadbolt Latch x 1
- Deadbolt Strike Plate x 1
- Buckle box x 1
- Mounting Plate x 1
- Mechanical keys x 2
- Screws: 1-5/32" (33mm) x 2, 3/4" (19mm) x 2, 3/4" (19mm) x 4
Installation
The ELAMOR M19 lock is designed for easy installation, typically requiring only 15 minutes with a screwdriver. It features an adaptive left and right door design, eliminating the need to distinguish door orientation during setup.
Door Preparation
Ensure your door meets the following specifications for proper installation:
- Backset: 2-3/8" or 2-3/4" (60-70mm)
- Hole in door edge: 1" (25mm)
- Door thickness: Between 1-3/8" and 2" (35mm and 50mm)
Image: Diagram illustrating the required door backset, edge hole, and thickness for ELAMOR M19 installation.
Installation Steps
- Install the deadbolt latch into the door edge. Ensure the latch is oriented correctly for your door's swing.
- Mount the exterior keypad assembly. Feed the cable through the door hole.
- Attach the mounting plate to the interior side of the door, securing it with screws.
- Connect the cable from the exterior assembly to the interior assembly.
- Secure the interior assembly to the mounting plate.
- Install batteries (4 x AA, not included) into the interior assembly.
- Perform the door handing identification process (refer to the detailed user guide for specific steps).
Image: A person using a screwdriver to install the ELAMOR M19 Keyless Entry Door Lock, demonstrating the ease of installation.
Image: Close-up view of the ELAMOR M19 lock being installed on a door, highlighting the process of securing the components.
Operating Instructions
Unlocking the Door
To unlock the door using the keypad:
- Enter your 4-8 digit user code on the keypad.
- Press the "Lock" button (padlock icon).
The deadbolt will retract, allowing you to open the door. The keypad numbers illuminate when pressed, making it easy to use in low light conditions.
Image: A person entering a code on the ELAMOR M19 keypad to unlock the door, illustrating the keyless entry feature.
Image: The illuminated keypad of the ELAMOR M19 lock, showing its visibility in dark environments.
Locking the Door
To lock the door from the outside, simply press the "Lock" button (padlock icon) on the keypad. The deadbolt will extend.
From the inside, turn the thumb-turn to lock the door.
Auto-Lock Feature
The lock can be set to automatically lock after a specified period (3 to 30 seconds). This feature provides peace of mind, ensuring your door is always secured.
Image: A woman carrying groceries, demonstrating the convenience of the auto-lock feature of the ELAMOR M19 lock.
Image: Visual representation of the auto-lock function, indicating the lock automatically engaging after a set time.
Managing User Codes
The ELAMOR M19 supports up to 50 different user codes, in addition to a master code. This allows for flexible access management for family, friends, or service providers.
Image: The ELAMOR M19 lock surrounded by various user profiles, symbolizing its multi-user code capability.
Refer to the full user manual (PDF link provided in the "Additional Resources" section) for detailed instructions on programming and deleting user codes, as well as setting up the master code.
Security Features
- Anti-Hack Security: The solid lock cylinder and premium chip protect against unauthorized access.
- Alarm Alert Function: The lock automatically triggers an alarm and locks for 90 seconds if an incorrect code is entered more than 5 times.
- Mechanical Key Override: Two mechanical keys are included for emergency access.
Maintenance
Battery Replacement
The ELAMOR M19 lock is powered by 4 AA batteries (not included). Under normal circumstances, batteries can last up to 1 year. A low-battery indicator will alert you when it's time to replace them.
Image: The ELAMOR M19 lock displaying a low battery reminder, indicating the need for battery replacement.
To replace batteries, remove the interior assembly cover and insert new AA batteries, ensuring correct polarity.
Cleaning and Care
The lock features an IP54 waterproof design, making it impervious to rain and suitable for outdoor use. To clean the lock, use a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish or electronic components.
Image: A person interacting with the ELAMOR M19 lock during rainfall, emphasizing its IP54 waterproof and high durability features.
Troubleshooting
If you encounter issues with your ELAMOR M19 lock, consider the following common solutions:
- Lock not responding to code:
- Ensure batteries are not depleted. Replace if the low-battery indicator is active.
- Verify the correct user code is being entered.
- Check if the lock has entered alarm mode due to multiple incorrect entries. Wait 90 seconds.
- Deadbolt not extending/retracting fully:
- Check for any obstructions in the door frame or strike plate.
- Ensure the lock is properly aligned and not binding. Re-check installation steps if necessary.
- Confirm the door handing process was completed correctly during installation.
- Keypad not illuminating:
- Check battery level.
For more detailed troubleshooting steps or persistent issues, please refer to the full user manual or contact ELAMOR customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | ELAMOR |
| Model Name | M19 ORB |
| Lock Type | Key Lock, Keypad |
| Special Feature | Smart Lock, Waterproof (IP54) |
| Material | Zinc |
| Color | Oil Rubbed Bronze |
| Item Dimensions (L x W x H) | 7.52 x 5.63 x 4.45 inches |
| Item Weight | 1 Pounds |
| Power Source | 4 x AA Batteries (not included) |
| Recommended Uses | Front Door, Home Use, Apartment, Office, Hotel, Garage, Wine Cellar, Flats |
| Certifications | BHMA Certified, ANSI Grade 3 |
Warranty and Support
ELAMOR provides a 12-month warranty for this product. A dedicated 24-hour service team is available to assist with any inquiries or issues.
For warranty claims or technical support, please refer to the contact information provided in the full user manual or on the ELAMOR official website.
Additional Resources
For a more detailed guide, you can download the official PDF user manual:
You can also visit the official ELAMOR store for more products and support:
