Storkcraft Santa Monica 5-in-1 Convertible Crib Instruction Manual

1. Introduction

This manual provides essential instructions for the safe assembly, use, and maintenance of your Storkcraft Santa Monica 5-in-1 Convertible Crib. Please read all instructions carefully before assembly and keep this manual for future reference. The Storkcraft Santa Monica crib is designed to adapt to your child's growth, converting from a crib to a toddler bed, daybed, and full-size bed.

Image 1: The Storkcraft Santa Monica 5-in-1 Convertible Crib in its crib configuration, featuring a white finish with a vintage driftwood base.

Image 2: The Storkcraft Santa Monica crib placed in a modern nursery, showcasing its aesthetic appeal.

2. Safety Information

Your child's safety is paramount. Always follow these safety guidelines. Failure to do so can result in serious injury or death.

• Read all instructions: Assemble the crib according to the manufacturer's instructions.
• Check for damage: Periodically check the crib for damaged hardware, loose joints, missing parts, or sharp edges. Do not use the crib if any parts are missing or broken.
• Mattress size: Use only a mattress that is at least 27 1/4 inches (69 cm) by 51 5/8 inches (131 cm) with a thickness not exceeding 6 inches (15 cm). The mattress must fit snugly without gaps.
• Child's height/weight: This crib is intended for use until your child can easily climb out or is taller than 35 inches (89 cm). The maximum weight recommendation is 50 pounds.
• Avoid suffocation hazards: Do not place the crib near windows where cords from blinds or drapes could strangle a child. Do not place items with a string or cord around a child's neck, such as hood strings or pacifier cords. Do not suspend strings over a crib or attach strings to toys.
• No soft bedding: Never use plastic shipping bags or other plastic film as mattress covers. They can cause suffocation. Do not place pillows, comforters, or other soft bedding in the crib with an infant.
• GREENGUARD Gold Certified: This product has been screened for over 10,000 chemicals and volatile organic compounds (VOCs) known to pollute indoor air, contributing to a healthier nursery environment.
• JPMA Certified: Expert tested by independent laboratories to meet or exceed all applicable category voluntary and mandatory safety standards.

Image 3: Safety certifications for the Storkcraft Santa Monica Crib, including GREENGUARD Gold and JPMA Certified badges.

3. Parts List

Before beginning assembly, ensure all parts and hardware are present. Refer to the included assembly instructions for a detailed list and diagrams.

• Crib Panels (Headboard, Footboard, Side Rails)
• Mattress Support Base
• Hardware (Screws, Bolts, Washers, Allen Wrench)
• Assembly Instructions

Note: Mattress, toddler guardrail, and full-size bed conversion kit are sold separately.

4. Setup and Assembly

Assembly requires two adults. Follow the step-by-step instructions provided in the separate assembly manual included with your product.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a soft, clean surface to prevent scratches.
2. Attach Side Rails: Secure the side rails to the headboard and footboard using the provided hardware. Ensure all connections are tight.
3. Install Mattress Support: Insert the mattress support base into the designated slots on the side rails. Choose the appropriate height setting for your infant (see Section 5 for details).
4. Final Checks: Double-check all screws and bolts to ensure they are securely fastened. Do not overtighten.

Image 4: Front view of the assembled crib, highlighting the clean lines and sturdy construction.

Image 5: Side view of the assembled crib, showing the vertical slats and two-tone design.

5. Operating Instructions

5.1 Mattress Height Adjustment

The Storkcraft Santa Monica crib features a 3-position adjustable mattress support base. Adjust the mattress height according to your child's developmental stage to ensure safety.

• Highest Position: For newborns and infants who cannot push up on their hands and knees. This position allows easier access to your baby.
• Middle Position: For infants who can push up on their hands and knees, or sit unassisted.
• Lowest Position: For active babies who can stand. This position prevents your child from climbing out of the crib.

To adjust the mattress height, carefully remove the mattress and mattress support. Reposition the support to the desired height and re-secure it with the appropriate hardware. Always ensure the mattress support is level and securely fastened before placing your child in the crib.

Image 6: Diagram illustrating the three adjustable mattress height positions of the crib.

5.2 Conversion Instructions

The Santa Monica crib converts into a toddler bed, daybed, and full-size bed. Conversion kits (toddler guardrail, full-size bed rails) are sold separately. Refer to the specific conversion kit instructions for detailed steps.

• Toddler Bed: Remove the front side rail and install the toddler guardrail (sold separately).
• Daybed: Remove the front side rail. No guardrail is used for this configuration.
• Full-Size Bed: Remove both side rails and the mattress support. Attach the headboard and footboard to a full-size bed frame using the full-size conversion kit (sold separately).

Image 7: The crib transformed into a toddler bed with a safety guardrail.

Image 8: The crib configured as a daybed, suitable for older children.

Image 9: The crib converted into a full-size bed, utilizing the original headboard and footboard.

6. Maintenance and Care

Proper care will extend the life and safety of your Storkcraft Santa Monica crib.

• Cleaning: Wipe with a damp cloth. Avoid abrasive cleaners or strong chemicals that could damage the finish.
• Regular Inspection: Periodically check all screws, bolts, and hardware to ensure they are tight. Retighten as necessary.
• Storage: If storing the crib, do so in a dry, temperature-controlled environment to prevent warping or damage.

7. Troubleshooting

If you encounter any issues with your crib, please refer to these common solutions:

• Loose Parts: If any parts feel loose, gently tighten the corresponding screws or bolts. Do not overtighten.
• Squeaking: Check all connections and ensure they are tight. A small amount of silicone lubricant can be applied to metal-on-metal contact points if squeaking persists.
• Missing Hardware: If you are missing any hardware, contact Storkcraft customer service for replacement parts. Do not substitute with non-manufacturer parts.

8. Specifications

9. Warranty and Support

For warranty information, replacement parts, or customer support, please visit the official Storkcraft website or contact their customer service department.

Storkcraft Official Website: www.storkcraft.com