Evotech Performance Tail Tidy Installation Manual for Ducati Streetfighter V2 (2022-2024)

1. Product Overview

This manual provides detailed instructions for the installation and maintenance of the Evotech Performance Tail Tidy, designed specifically for Ducati Streetfighter V2 motorcycles manufactured between 2022 and 2024.

Image 1.1: Evotech Performance Tail Tidy installed on a Ducati Streetfighter V2.

The unit is CNC machined from lightweight billet aircraft-grade aluminum and finished with a black powder coating for durability. It is designed for a direct fit, utilizing existing mounting points on your motorcycle without requiring modifications. The design ensures retention of the original signal lights and includes a new LED license plate light. Wiring is plug-and-play, with provisions for hidden cable routing.

2. Safety Information

• Always ensure the motorcycle is stable and securely supported before beginning any installation work.
• Disconnect the motorcycle's battery before working on any electrical components to prevent short circuits or damage.
• Wear appropriate personal protective equipment, including gloves and eye protection.
• If you are unsure about any step of the installation process, it is recommended to seek assistance from a qualified motorcycle technician.
• Ensure all fasteners are tightened to the manufacturer's recommended torque specifications. Overtightening or undertightening can lead to component failure.
• After installation, perform a thorough check of all lights and electrical connections to ensure proper functionality before riding.

3. Package Contents

Please verify that all components listed below are present in your package before beginning installation.

• Evotech Performance Tail Tidy Unit (Main Bracket)
• LED License Plate Light
• Wiring Harness (Plug-and-play)
• License Plate Adapters (Optional, for varied plate hole alignments)
• All Required Fixings (Bolts, washers, nuts)

Image 3.1: Evotech Performance Tail Tidy main unit.

4. Installation Guide

Follow these steps carefully to install your Evotech Performance Tail Tidy. Pictorial instructions are provided to assist with the process.

4.1. Preparation

1. Park your Ducati Streetfighter V2 on a stable, level surface using a paddock stand or center stand.
2. Ensure the ignition is off and the key is removed.
3. Gather all necessary tools (e.g., Allen keys, wrenches, wire cutters/strippers if needed, though wiring is plug-and-play).

4.2. Removal of OEM Components

1. Carefully remove the rear seat and any panels necessary to access the OEM fender and wiring.
2. Disconnect the wiring for the OEM license plate light and turn signals. Note the connections for re-use with the OEM signal lights.
3. Unbolt and remove the existing OEM rear fender assembly. Retain any bolts or washers specified in the pictorial instructions for potential re-use.

Image 4.1: Ducati Streetfighter V2 with the tail tidy, showing the final aesthetic.

4.3. Tail Tidy Assembly and Installation

1. Attach the supplied LED license plate light to the Evotech Performance Tail Tidy unit. Ensure it is securely fastened.
2. Mount your OEM signal lights onto the designated points on the new tail tidy.
3. Route the wiring for the LED license plate light and OEM signal lights through the hidden channels provided on the tail tidy for a clean finish.
4. Position the Evotech Performance Tail Tidy onto the motorcycle's existing mounting points. Secure it using the supplied fixings. Ensure all bolts are snug but do not fully tighten yet.
5. Connect the plug-and-play wiring harness for the LED license plate light and re-connect the OEM signal lights. Ensure all connections are firm and correctly seated.
6. If your license plate locating holes do not align with the tail tidy, use the provided license plate adapters to ensure a secure fit.
7. Once all components are in place and connections are made, progressively tighten all fasteners to the motorcycle manufacturer's recommended torque specifications.

Image 4.2: Underside view of the tail tidy, highlighting wiring integration.

4.4. Final Checks

1. Reconnect the motorcycle's battery.
2. Turn on the ignition and test the functionality of the LED license plate light, brake light, and both left and right turn signals.
3. Ensure all wires are neatly tucked away and not exposed to moving parts or excessive heat.
4. Reinstall any removed panels and the rear seat.
5. Double-check all fasteners for tightness before riding.

5. Operation

The Evotech Performance Tail Tidy integrates seamlessly with your motorcycle's existing electrical system. Once installed, the LED license plate light will illuminate with your motorcycle's running lights, and your OEM signal lights will function as before. No special operational procedures are required for the tail tidy itself.

6. Maintenance

• Regular Inspection: Periodically check all mounting bolts and fasteners for tightness, especially after the first few rides following installation. Vibrations can sometimes loosen components.
• Cleaning: Clean the tail tidy with standard motorcycle cleaning products. Avoid abrasive cleaners or harsh chemicals that could damage the powder coat finish or electrical components.
• Wiring Check: Occasionally inspect the wiring for any signs of wear, fraying, or loose connections.

7. Troubleshooting

8. Product Specifications

• Brand: Evotech Performance
• Model: PRN014957-015126-14
• Compatibility: Ducati Streetfighter V2 (Years 2022-2024)
• Material: CNC Machined Billet Aircraft Grade Aluminum
• Finish: Black Powder Coat
• Weight: Approximately 0.8 Kilograms (1.76 pounds)
• Features: Retains OEM signal lights, includes new LED license plate light, plug-and-play wiring, hidden wire routing.

9. Warranty and Support

For specific warranty information regarding your Evotech Performance Tail Tidy, please refer to the documentation provided with your purchase or visit the official Evotech Performance website.

If you encounter any issues during installation or operation that are not covered in this manual, or if you require technical assistance, please contact Evotech Performance customer support through their official channels.

Note: For insurance purposes, a signature may be required upon delivery if the package contents amount to $250 or above.