1. Introduction
This manual provides instructions for the Gorilla babo Universal Remote Control, designed for seamless compatibility with various Yamaha Audio/Video Receiver systems. This remote is pre-programmed and requires no additional setup for the listed compatible models. Please read this manual thoroughly to understand the remote's functions and ensure optimal performance.
Compatible Yamaha Audio/Video Receiver Models:
- RAV240
- DSP-AX630
- DSP-AX630SE
- HTR-5560
- HTR-5560RDS
- RX-V630
- RX-V630RDS
- RX-V730
- RX-V730RDS
2. Product Overview
The Gorilla babo Universal Remote Control features a standard layout for easy operation of your Yamaha Audio/Video Receiver. Below is an image of the remote with a description of its key buttons and their functions.
Button Functions:
- POWER (Red Button): Turns the Audio/Video Receiver on or off.
- DVD, DTV/CBL, VCR, CD, MD/CD/R, V-AUX, MULTI CH IN, TUNER: Selects the corresponding input source.
- PRESET+ / PRESET-: Navigates through radio station presets.
- STANDARD, STEREO, 5CH, NIGHT, SLEEP, MUSIC, STANDARD SELECT, STRAIGHT: Selects various sound modes and audio processing options.
- TEST: Initiates speaker test tone.
- VOLUME + / -: Adjusts the main volume level.
- MUTE: Mutes or unmutes the audio output.
- PROG+ / PROG-: Used for program selection or navigation in certain modes.
- LEVEL: Adjusts individual channel levels.
- MENU SET: Accesses and confirms menu settings.
- RETURN, MEMORY, DIRECT ST: Navigation and function buttons for specific receiver features.
- A SPEAKERS B: Toggles between speaker sets A and B.
- Directional Arrows (Up, Down, Left, Right): Navigates through menus and options.
- ENTER: Confirms selections in menus.
- * (Asterisk): May have a specific function depending on the receiver model.
- SYSTEM POWER: Controls overall system power.
- STANDBY: Puts the receiver into standby mode.
3. Setup
3.1 Battery Installation
- Locate the battery compartment on the back of the remote control.
- Slide the battery compartment cover downwards or outwards to open it.
- Insert two (2) AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Replace the battery compartment cover by sliding it back into place until it clicks securely.
Note: This remote control is pre-set and does not require any programming. It is ready for use immediately after battery installation.
4. Operating Instructions
4.1 Basic Functions
- Power On/Off: Press the POWER button to turn your Yamaha receiver on or off.
- Volume Adjustment: Press VOLUME + to increase volume and VOLUME - to decrease volume.
- Mute: Press the MUTE button to temporarily silence the audio. Press it again to restore sound.
4.2 Input Source Selection
To select an input source (e.g., DVD player, CD player, TV), press the corresponding button on the remote control (e.g., DVD, CD, DTV/CBL, TUNER).
4.3 Sound Mode Selection
Your Yamaha receiver offers various sound modes. Press buttons like STANDARD, STEREO, 5CH, NIGHT, MUSIC, or STRAIGHT to cycle through or directly select your desired audio processing mode.
4.4 Menu Navigation
Use the directional arrow buttons (Up, Down, Left, Right) to navigate through the receiver's on-screen menus. Press ENTER to confirm a selection and MENU SET to access the main menu.
5. Maintenance
5.1 Battery Replacement
If the remote control's range decreases or it becomes unresponsive, the batteries may need to be replaced. Follow the battery installation steps in Section 3.1 to replace the two (2) AAA batteries. Always replace both batteries at the same time with new ones.
5.2 Cleaning
To clean the remote control, wipe it with a soft, dry cloth. Do not use liquid cleaners, abrasive pads, or chemical solvents, as these can damage the remote's surface or internal components.
6. Troubleshooting
- Remote not responding:
- Ensure the batteries are inserted correctly with the correct polarity.
- Replace old batteries with new AAA batteries.
- Check for any obstructions between the remote control and the receiver's infrared sensor.
- Ensure you are within the effective operating range and pointing the remote directly at the receiver.
- Specific functions not working:
- Verify that your Yamaha receiver model is listed as compatible in Section 1.
- Some advanced functions may be specific to the original remote or receiver model.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Gorilla babo |
| Compatible Devices | Yamaha Audio/Video Receivers (RAV240, HTR-5560, RX-V630, RX-V730, DSP-AX630 series) |
| Connectivity Technology | Infrared (IR) |
| Power Source | 2 x AAA Batteries (not included) |
| Product Dimensions | 6.5 x 2.17 x 0.2 inches |
| Item Weight | 2.39 ounces |
| Special Feature | Universal, Pre-programmed |
8. Warranty and Support
Specific warranty information for this Gorilla babo Universal Remote Control is not provided in the product details. For any support inquiries or further assistance, please refer to the retailer or the manufacturer's contact information if available on the product packaging.
