Introduction
Thank you for choosing the SECRUI Wireless Doorbell. This manual provides detailed instructions for the installation, operation, and maintenance of your new doorbell system. Please read this manual thoroughly before use to ensure proper functionality and longevity of the product.
The SECRUI Wireless Doorbell system includes two plug-in receivers and two remote push buttons, designed for ease of use and reliable performance. With a long operating range, multiple chime options, and weather-resistant design, it is suitable for various home and office environments.
Package Contents
Please verify that all items listed below are included in your package:
- 2 x Plug-in Receivers
- 2 x Remote Push Buttons (Transmitters)
- 2 x Sets of Screws (for mounting)
- 4 x Double-Sided Tapes (for mounting)
- 1 x User Manual
- Batteries (1 x CR2032 per transmitter, pre-installed)
Image: The complete SECRUI Wireless Doorbell kit, showing two white plug-in receivers and two white remote push buttons.
Setup and Installation
The SECRUI Wireless Doorbell is designed for quick and easy installation. Follow these steps to set up your system:
- Prepare the Receiver: Plug the plug-in receiver into a standard electrical outlet (120 Volts AC) in your desired location. Ensure the outlet is easily accessible and not obstructed. The receiver is designed to be mini-sized so it won't block other sockets.
- Prepare the Push Button: The remote push button comes with a pre-installed CR2032 battery.
- Mount the Push Button: Choose a suitable location for your push button, such as near your front door. You have two mounting options:
- Using Double-Sided Tape: Clean the surface thoroughly. Peel off one side of the protective film from the double-sided tape and apply it firmly to the back of the push button. Peel off the other side and press the push button firmly onto the desired surface for at least 30 seconds.
- Using Screws: For a more permanent installation, use the provided screws and anchors. Mark the desired drilling spots, drill pilot holes (exercise caution and check for hidden electrical cables/water pipes before drilling), insert the anchors, and then screw the push button into place.
- Pairing (if necessary): The units are typically pre-paired from the factory. If they do not work out of the box, or if you wish to pair additional transmitters/receivers, follow these steps:
- Plug in the receiver.
- Press and hold the volume button on the receiver for 5 seconds until the LED indicator flashes rapidly.
- Immediately press the push button. The receiver will chime, indicating successful pairing.
Image: Diagram showing the compact dimensions of the receiver (2.56 x 2.56 x 0.98 inches) and push button (2.56 x 1.3 x 0.79 inches), highlighting that the receiver won't block other sockets.
Operating Instructions
Once installed, operating your SECRUI Wireless Doorbell is straightforward:
- Ringing the Doorbell: Simply press the remote push button. The receiver will play the selected chime and the LED indicator will flash.
- Changing Chimes: The doorbell offers 58 different melodies. To change the chime:
- Press the "Forward" or "Backward" button on the side of the receiver to cycle through the available melodies.
- Once you hear a melody you like, press the push button to set it. The receiver has a memory function that will remember your last selected chime even after a power outage.
- Adjusting Volume: The doorbell has 5 adjustable volume levels, up to 120 dB.
- Press the "Volume" button on the side of the receiver to cycle through the volume levels.
- Select the desired volume.
- LED Indicator: Both the receiver and the push button feature an LED indicator that flashes when the doorbell is activated, providing a visual alert.
Image: Graphic illustrating musical notes emanating from the receiver, representing the 58 available chimes and 5 volume levels.
Key Features
- Extended Wireless Range: The doorbell operates using FM signal technology, providing a strong anti-interference capability and an impressive wireless range of up to 1000 feet (300 meters) in open areas. This ensures you won't miss a visitor or delivery, even if you are in a different part of your home or property.
- IP55 Weather Resistance: The outdoor push button is constructed from high-quality waterproof material, rated IP55. This ensures reliable performance in various weather conditions, including wind, snow, sleet, and extreme hot or cold temperatures (operating range: -4°F to 140°F / -20°C to 60°C).
- Smart Memory Function: The receiver retains your last selected chime and volume level even after a power interruption, eliminating the need to reconfigure settings.
- Versatile Use: Beyond a traditional doorbell, this system can also function as a call pager for caregivers, children, or pregnant women, providing an easy way to signal for assistance.
Image: An illustration of a house with the doorbell receiver and push button, showing a wide circular range extending 1000 feet, indicating broad coverage.
Image: Two panels illustrating the doorbell's use as a caregiver pager: one showing an elderly person in a wheelchair with a caregiver, and another showing a pregnant woman, emphasizing its utility for those needing assistance.
Care and Maintenance
- Cleaning: Wipe the doorbell units with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Battery Replacement: The push button uses a CR2032 lithium manganese dioxide battery. When the push button's LED indicator no longer flashes or the range decreases significantly, it's time to replace the battery. Carefully open the push button casing and replace the battery, ensuring correct polarity. The average battery life is 3 years.
- Environmental Considerations: While the push button is weather-resistant, avoid submerging it in water. Ensure the receiver is always in a dry indoor environment.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Doorbell does not ring. | Receiver unplugged or no power. Push button battery is dead. Units are not paired. Too far apart or interference. | Ensure receiver is plugged into a live outlet. Replace CR2032 battery in push button. Re-pair the push button and receiver (see Setup section). Move receiver closer to push button or away from large metal objects/electronics. |
| Short operating range. | Obstructions (thick walls, metal structures). Low battery in push button. Interference from other wireless devices. | Relocate receiver or push button to minimize obstructions. Replace CR2032 battery. Move doorbell away from other wireless devices (e.g., Wi-Fi routers, cordless phones). |
| Chime volume is too low/high. | Volume setting is not optimal. | Press the volume button on the receiver to adjust to the desired level. |
| Chime changes unexpectedly. | Accidental button press on receiver. | Select your preferred chime again using the forward/backward buttons. The memory function should retain it. |
Important Safety Information:
- Always follow manufacturer's advice when using power tools and wear suitable protective equipment (e.g., safety goggles) when drilling holes.
- Before drilling holes in walls, check for hidden electricity cables and water pipes. The use of a cable/pipe locator is advisable if in doubt.
Specifications
| Feature | Detail |
|---|---|
| Model Number | AUB09PTWBVTL (M520+F55) |
| Brand | SECRUI |
| Color | White |
| Material | ABS |
| Power Source | AC & Battery-Powered |
| Voltage | 120 Volts (AC) |
| Wireless Range | Up to 1000 feet (300 meters) |
| Chimes | 58 Melodies |
| Volume Levels | 5 Levels (up to 120 dB) |
| Push Button Battery | 1 x CR2032 (included) |
| Average Battery Life | 3 years |
| Weather Resistance | IP55 (for push button) |
| Operating Temperature | -4°F to 140°F (-20°C to 60°C) |
| Installation Method | Self-Adhesive & Screw-In |
| Item Weight | 8.1 ounces |
| Package Dimensions | 5.51 x 2.95 x 2.83 inches |
Warranty and Support
SECRUI is committed to providing high-quality products and excellent customer service. For any questions, concerns, or technical support regarding your Wireless Doorbell, please contact SECRUI customer service through the retailer's platform or the official SECRUI website.
Please retain your purchase receipt for warranty purposes. Information regarding specific warranty periods and terms can typically be found on the product packaging or the official SECRUI website.
For more information about SECRUI products, visit the SECRUI Store on Amazon.
