Important Safety Instructions
Please read and save these safety instructions before using this air circulator fan. Failure to follow these instructions may result in electric shock, fire, or injury.
- Always unplug the fan before cleaning, servicing, or moving it.
- Do not operate the fan with a damaged cord or plug. If the cord or plug is damaged, contact customer support.
- Keep the fan out of reach of children and pets.
- Do not insert fingers or any objects through the grille when the fan is operating.
- Ensure the fan is placed on a stable, level surface to prevent tipping.
- Do not use the fan near water or in excessively humid environments.
- Do not block air openings or operate near curtains or other materials that could block airflow.
- This fan is for indoor use only.
Setup Guide
1. Unpacking
Carefully remove the fan and all accessories from the packaging. Retain the packaging for future storage or transport.
2. Placement
Place the fan on a firm, level surface. Ensure there is adequate space around the fan for optimal air circulation. The fan measures approximately 12 inches in width and 15 inches in height.
Image: The AIRMATE fan shown with its approximate dimensions of 12 inches wide and 15 inches high, illustrating its compact size for placement on various surfaces.
3. Power Connection
Plug the power cord into a standard 120V AC electrical outlet. Ensure the plug is fully inserted.
Operating Instructions
The AIRMATE air circulator fan can be operated using the control panel on the unit or the included remote control.
Control Panel Overview
Image: A detailed view of the fan's control panel, highlighting buttons for On/Off, 10 Wind Speeds, 10H Timer, 120° Rotation, and Baby Soft Wind mode.
1. Power On/Off
Press the Power button (P) on the control panel or remote to turn the fan on or off.
2. Adjusting Fan Speed (10 Speeds)
The fan offers 10 speed settings. Press the Speed button (Q) repeatedly to cycle through the speeds from 1 to 10. The fan also features a 'Baby Soft Wind' mode for gentle airflow.
Image: A visual representation of the fan's 10 speed settings, divided into categories: 1-3 for Soft Wind, 4-8 for Natural Airflow, and 9-10 for Whole House Ventilation, along with a Boot Recovery Settings icon.
Image: A serene image of a baby sleeping, with the fan positioned nearby, emphasizing the fan's quiet operation (lowest noise at 30dB) and suitability for bedrooms.
3. Oscillation and Tilt
The fan provides multi-directional airflow:
- Horizontal Oscillation: Press the Rotation button (R) to activate 120° automatic left and right oscillation. Press again to stop.
- Vertical Tilt: Manually adjust the fan head up or down by 90° to direct airflow as needed.
Image: A graphic demonstrating the fan's multi-directional airflow capabilities, showing automatic 120° left/right oscillation and manual 90° up/down tilt.
4. Timer Function
Set the fan to automatically turn off after a specified period. Press the Timer button (T) to select a duration up to 12 hours. Each press cycles through available timer settings (e.g., 1H, 2H, 4H, 8H).
5. Remote Control
The included remote control allows for convenient operation from a distance. Ensure the remote is pointed towards the fan's receiver for optimal functionality.
6. One-touch Memory Function
The fan features a memory function that retains your last settings (speed, oscillation, timer) upon shutdown. When powered on again, it will resume operation with these previous settings.
Image: The AIRMATE fan positioned on a desk, illustrating the 'One-touch Memory Function' which allows the fan to resume previous settings after being turned off and on again.
7. Air Circulation Technology
The fan utilizes an aerodynamic turbine and bionic fan blade design with an energy-saving DC motor to maximize airflow and circulate air efficiently throughout the room.
Image: An exploded view diagram of the Airmate DC Motor Fan's internal components, highlighting the AirTensity Spiral Grill, Enclosed Air Duct, Deep Pitch Blades, and Inlet Air Accelerator, which contribute to its powerful and efficient air circulation.
Product Video
Video: An official product video demonstrating the features and operation of the AIRMATE Air Circulator Table Fan, including its quiet performance, oscillation, and various speed settings.
Maintenance
1. Cleaning the Exterior
Before cleaning, always unplug the fan from the power outlet. Use a soft, damp cloth to wipe the exterior surfaces of the fan. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish.
2. Cleaning the Fan Blades and Grille
To clean the fan blades and inside the grille, carefully remove the front grille. Refer to the diagram below for guidance. Use a soft brush or a vacuum cleaner with a brush attachment to remove dust and debris from the blades and internal components. Ensure all parts are dry before reassembling and operating the fan.
Image: A hand demonstrating the removal of the front grille from the AIRMATE fan, indicating how to access the fan blades for cleaning.
3. Storage
When not in use for extended periods, store the fan in a cool, dry place, preferably in its original packaging, to protect it from dust and damage.
Troubleshooting Guide
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on. | No power supply. Power cord not properly plugged in. | Check if the power outlet is working. Ensure the power cord is securely plugged into the outlet and the fan. |
| Weak or no airflow. | Fan speed set too low. Air intake/outlet blocked. | Increase the fan speed setting. Ensure there are no obstructions blocking the front or rear grilles of the fan. |
| Unusual noise during operation. | Fan blades or grille are dirty. Fan not on a stable surface. | Unplug the fan and clean the blades and grilles as per maintenance instructions. Place the fan on a flat, stable surface. |
| Oscillation not working. | Oscillation function not activated. Obstruction preventing movement. | Press the oscillation button on the control panel or remote. Check for any objects hindering the fan's rotation. |
Product Specifications
- Brand: AIRMATE
- Model Name: FB2067R
- Color: Black
- Electric Fan Design: Table Fan
- Power Source: DC
- Product Dimensions: 12"D x 12"W x 13"H
- Wattage: 20 watts
- Number of Power Levels: 10
- Control Method: Remote, Push Button
- Special Feature: Programmable, 120° Oscillation, 90° Manual Tilt, Timer, Baby Soft Wind Mode, Memory Function
- Indoor/Outdoor Usage: Indoor
- Item Weight: 11.49 pounds (5.22 Kilograms)
Warranty Information
This product comes with a standard manufacturer's warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included in your product packaging or contact AIRMATE customer support.
Customer Support
If you have any questions, require assistance, or encounter issues not covered in this manual, please contact AIRMATE customer support. Contact information can typically be found on the product packaging, the official AIRMATE website, or the warranty card.
For more information, you may visit the AIRMATE Store on Amazon.
