Yottamaster 2 Bay RAID Hard Drive Enclosure

Introduction

This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your Yottamaster 2 Bay RAID Hard Drive Enclosure. Please read this manual carefully before using the product to ensure proper functionality and to maximize its lifespan. This enclosure is designed to provide high-speed data transfer and flexible storage solutions for your 2.5-inch SATA HDDs and SSDs.

Product Overview

Front view of the Yottamaster 2 Bay RAID Hard Drive Enclosure, showcasing its aluminum design and ventilation.

The enclosure positioned next to a laptop, illustrating its compact size and dimensions (166mm x 111mm x 48mm).

Key Features

• High-Speed Data Transfer: Supports USB3.1 Gen2 with 10Gbps transfer rate and UASP protocol for accelerated speeds.
• Large Storage Capacity: Accommodates two 2.5-inch SATA HDDs/SSDs, supporting up to 8TB total (4TB per disk).
• RAID Modes: Supports RAID 0 (Striping for speed), RAID 1 (Mirroring for data security), SPAN (Concatenation for mass storage), and PM (Port Multiplier for independent disks).
• Efficient Heat Dissipation: Constructed with an all-aluminum shell and meteor radiators for optimal air ventilation and heat management.
• Broad Compatibility: Compatible with Windows, Mac OS, and Linux systems. Designed to complement Mac computers.
• Power Supply: Includes a 5V/2A external power adapter for stable operation.
• Auto-Sleep Function: Automatically enters sleep mode after 10 minutes of data inactivity to save energy and extend HDD life.

Setup Guide

1. Hardware Installation

Before installing your hard drives, ensure they are 2.5-inch SATA HDDs or SSDs with a thickness of 7mm, 9mm, or 12.5mm. It is recommended to initialize new drives before installation if you plan to use them in PM mode.

1. Carefully slide open the enclosure's front panel to reveal the drive bays.
2. Insert your 2.5-inch SATA HDD/SSD into the drive tray. Ensure the SATA connectors align correctly.
3. Secure the drive to the tray using the provided screws.
4. Slide the assembled drive tray into one of the enclosure's bays until it clicks into place. Repeat for the second drive.
5. Close the enclosure's front panel securely.

Illustration of the enclosure supporting 7mm, 9mm, and 12.5mm 2.5-inch SATA HDDs/SSDs.

The enclosure with its front panel detached, showing the internal drive bays ready for disk installation.

A 2.5-inch hard drive securely mounted onto its dedicated tray, ready for insertion into the enclosure.

A screw being inserted into the top of the enclosure, indicating the method for securing the internal components or drives.

2. Connecting to Your Computer

1. Connect the provided USB-C cable from the enclosure's Type-C port to an available USB port on your computer.
2. Connect the 5V/2A external power adapter to the enclosure's power input port and then plug it into a power outlet. Ensure the power switch on the back of the enclosure is in the "ON" position.

The enclosure with its USB-C data cable and 5V/2A power adapter connected, illustrating proper power delivery.

Rear view of the enclosure highlighting the Type-C port, power input, and the RAID configuration switches.

3. RAID Configuration

The enclosure supports PM (Port Multiplier), RAID 0, RAID 1, and SPAN modes. The desired RAID mode is set using the switches located at the rear of the enclosure. Changing the RAID mode will erase all data on the drives. Ensure you back up any critical data before making changes.

Important: After setting the desired RAID mode using the switches, you must press and hold the "SET" button (usually a small recessed button requiring a paperclip) for a few seconds until the indicator lights confirm the change. Then, connect the enclosure to your computer. You may need to initialize and format the new volume through your operating system's Disk Management (Windows) or Disk Utility (macOS) before use.

Visual representation of the RAID mode switch positions and their corresponding settings.

Operating Instructions

Once the enclosure is set up and connected, your operating system should recognize it as an external storage device. You can then use it like any other hard drive for storing, accessing, and managing your files.

• Plug and Play: The enclosure supports hot-swapping and plug-and-play functionality, meaning you can connect and disconnect it without needing to restart your computer (ensure safe ejection procedures are followed).
• Data Transfer: Utilize the USB3.1 Gen2 Type-C connection for high-speed data transfers. Performance may vary based on your computer's USB port, cable quality, and the type of drives installed.
• Auto-Sleep Function: The enclosure is designed to automatically enter sleep mode after 10 minutes of inactivity. This feature conserves power and helps prolong the lifespan of your hard drives. The device will wake up automatically upon data access.

The enclosure illustrating its auto-sleep function, which activates after 10 minutes of inactivity to save energy.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the exterior of the enclosure. Avoid using liquid cleaners or aerosols directly on the device.
• Ventilation: Ensure the ventilation holes on the enclosure are not obstructed to allow for proper airflow and heat dissipation.
• Handling: Handle the enclosure with care. Avoid dropping it or subjecting it to strong impacts, as this can damage the internal drives and components.
• Temperature: Operate the enclosure in a well-ventilated area within recommended temperature ranges to prevent overheating.

Troubleshooting

If you encounter issues not covered here, please refer to the Warranty and Support section for further assistance.

Specifications

Warranty and Support

Yottamaster provides an 18-month warranty for this product, covering manufacturing defects and malfunctions under normal use. Additionally, lifetime technical support is available to assist you with any questions or issues you may encounter.

For technical assistance, warranty claims, or general inquiries, please contact Yottamaster support through their official website or the contact information provided with your product packaging. When contacting support, please have your product model number (DR2RC3-25) and purchase details ready.

Safety Warning: Do not repair, disassemble, or modify the product without permission. Unauthorized modifications may void your warranty and pose safety risks.

A warning label emphasizing not to repair, disassemble, or modify the product without authorization.