NORDRIVE N50415

NORDRIVE N50415 Wave 2 Tow Hitch Bicycle Carrier - 2 Bikes Instruction Manual

Model: N50415

1. Introduction

This instruction manual provides essential information for the safe and correct installation, operation, and maintenance of your NORDRIVE N50415 Wave 2 tow hitch bicycle carrier. Please read this manual thoroughly before assembly and use to ensure optimal performance and safety. Retain this manual for future reference.

2. Safety Information

  • Always ensure the bicycle carrier is securely attached to the tow hitch before loading bicycles.
  • Do not exceed the maximum load capacity of 60 kg (for 2 bikes) or 30 kg (for 1 bike).
  • Verify that all bicycles are properly secured to the carrier using the provided straps and frame arms.
  • Check the electrical connection (13-pole) for proper functioning of lights before each journey.
  • Drive cautiously, especially when cornering or braking, as the vehicle's dynamics will change with the added weight and length.
  • Regularly inspect the carrier for any signs of wear, damage, or loose components.
  • Adhere to all local traffic laws and regulations regarding vehicle dimensions and lighting when transporting bicycles.

3. What's in the Box

The NORDRIVE N50415 Wave 2 bicycle carrier package includes the following components:

  • NORDRIVE N50415 Wave 2 Bicycle Carrier main unit
  • Mounting hardware for tow hitch attachment
  • Sliding straps for wheel fixation
  • Frame arms with locks for securing bicycle frames
  • 13-pole electrical connector for lighting system
  • User Manual (this document)

4. Setup and Installation

The NORDRIVE N50415 Wave 2 is designed for quick and secure attachment to your vehicle's tow hitch.

  1. Unfolding the Carrier: The carrier features a foldable system for minimized bulk. Carefully unfold the main structure until it locks into its operational position.
  2. Attaching to Tow Hitch: Place the carrier onto the vehicle's tow hitch ball. Engage the locking mechanism according to the specific instructions provided with the carrier's coupling system. Ensure it is firmly secured and does not wobble.
  3. Electrical Connection: Connect the 13-pole plug from the carrier's lighting system to your vehicle's electrical socket. Verify that all lights (brake, turn signals, tail lights) are functioning correctly.
  4. Initial Inspection: Before loading bikes, double-check all connections and locking points.
NORDRIVE N50415 Wave 2 bicycle carrier installed on the rear of a white car with two bicycles loaded.

Image: The NORDRIVE N50415 Wave 2 carrier securely installed on a vehicle's tow hitch, demonstrating its appearance with two bicycles in transport position.

5. Operating Instructions

5.1 Loading Bicycles

  1. Positioning Bikes: Place the first bicycle onto the carrier, ensuring its wheels rest in the designated channels.
  2. Securing Wheels: Use the sliding straps to firmly secure both wheels of the bicycle to the carrier.
  3. Securing Frame: Attach the swivel frame arms to the bicycle's frame. These arms are designed to articulate 360° for flexible attachment. Lock the frame arms to prevent theft and ensure stability.
  4. Repeat for the second bicycle, ensuring even weight distribution and no contact between bikes.

5.2 Tilting System

The carrier features a tilting system, allowing access to your vehicle's trunk even with bicycles loaded.

  1. Ensure the vehicle is stationary and safe to access the rear.
  2. Activate the tilting mechanism (refer to the specific lever or button on your carrier).
  3. Gently tilt the carrier downwards, away from the vehicle, to gain access to the trunk.
  4. Once finished, return the carrier to its upright position, ensuring it locks securely back into place.
Diagram illustrating the tilting system of the bicycle carrier, showing how it moves away from the car to allow trunk access.

Image: Diagram demonstrating the carrier's tilting function for convenient trunk access.

5.3 Bicycle Compatibility and Weight Limits

The NORDRIVE N50415 Wave 2 is compatible with a wide range of bicycles, including standard, women's, E-bikes, and Fat-bikes, provided they meet the following specifications:

  • Maximum Capacity: 2 bicycles
  • Maximum Total Weight: 60 kg (for 2 bikes)
  • Maximum Single Bike Weight: 30 kg (if only one bike is transported)
  • Frame Diameter (Round): Minimum Ø30 mm, Maximum Ø50 mm
  • Frame Dimensions (Oval/Rectangular): Minimum 30x60 mm, Maximum 50x70 mm
  • Wheel Size: Minimum 22 inches, Maximum 29 inches
  • Maximum Wheelbase: 1260 mm
  • Maximum Tire Width: 110 mm
Diagram showing minimum and maximum bicycle frame dimensions, wheel sizes, wheelbase, and tire width for compatibility with the carrier.

Image: Visual guide for bicycle dimensions compatible with the carrier.

Diagram illustrating the maximum weight capacity for one or two bikes, and showing compatibility with standard, E-bike, and Fat-bike types.

Image: Overview of weight limits and compatible bicycle types.

6. Maintenance

Regular maintenance ensures the longevity and safe operation of your bicycle carrier.

  • Cleaning: After each use, especially after exposure to dirt, salt, or rain, clean the carrier with mild soap and water. Rinse thoroughly and dry to prevent corrosion.
  • Lubrication: Periodically lubricate moving parts, such as the tilting mechanism and locking points, with a suitable lubricant to ensure smooth operation.
  • Inspection: Regularly check all bolts, nuts, straps, and frame arms for tightness and wear. Replace any worn or damaged components immediately.
  • Storage: When not in use, store the carrier in a dry, protected area. The foldable design allows for compact storage.

7. Troubleshooting

This section addresses common issues you might encounter.

  • Carrier feels loose on tow hitch: Ensure the locking mechanism is fully engaged and tightened according to the installation instructions. Re-check the tow hitch ball for proper size and condition.
  • Bicycles are not stable: Verify that all sliding straps are tight and frame arms are securely clamped and locked to the bicycle frames. Adjust bike positioning if necessary to improve balance.
  • Lights are not working: Check the 13-pole electrical connection for proper insertion. Inspect the vehicle's electrical socket and the carrier's wiring for any visible damage. Test the vehicle's lights independently.
  • Tilting mechanism is stiff: Apply a suitable lubricant to the pivot points of the tilting system. Ensure no debris is obstructing the movement.

8. Specifications

FeatureDetail
Model NumberN50415
BrandNORDRIVE
MaterialAluminum, Steel Alloy
Capacity2 Bicycles
Max Load Capacity60 kg (total for 2 bikes), 30 kg (for 1 bike)
Mounting TypeTow Hitch Attachment
Electrical Connection13-pole
FoldableYes
Tilting SystemYes, for trunk access
Frame Arm Rotation360° swivel with lock
Compatible Bike TypesStandard, Women's, E-bike, Fat-bike

9. Warranty and Support

The NORDRIVE N50415 Wave 2 bicycle carrier comes with a manufacturer's warranty.

  • Warranty Period: 2 years from the date of purchase.
  • Warranty Coverage: Covers defects in materials and workmanship under normal use. It does not cover damage due to improper installation, misuse, accidents, or unauthorized modifications.
  • Customer Support: For technical assistance, warranty claims, or spare parts, please contact your retailer or the NORDRIVE customer service department. Refer to your purchase documentation for contact details.
Documents - NORDRIVE – N50415

no relevant documents

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.