1. Introduction
Thank you for choosing the Yaheetech Metal Bed Frame. This manual provides detailed instructions for the safe assembly, operation, and maintenance of your new bed frame. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Image 1.1: Fully assembled Yaheetech Metal Bed Frame.
2. Safety Information
To ensure safe use of this product, please observe the following warnings:
- Weight Limit: Do not exceed the maximum weight capacity of 136 kg (300 lbs). Overloading may cause structural failure and injury.
- Proper Assembly: Ensure the bed frame is correctly and securely assembled according to the instructions to prevent instability or tipping.
- Pinch Points: Be cautious of potential pinch points and sharp edges during assembly and use. Keep hands clear of moving parts.
- Children: Keep small parts and packaging materials away from children to prevent choking hazards.
- Regular Checks: Periodically check all bolts and connections to ensure they remain tight. Retighten as necessary.
- Level Surface: Always place the bed frame on a flat, level surface to ensure stability.
3. Package Contents
Before assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact customer support.
(A detailed parts list is typically included with the physical product. Please refer to the diagram and list provided in your product packaging.)
4. Assembly Instructions
Follow these steps carefully to assemble your Yaheetech Metal Bed Frame. It is recommended to have two people for assembly.
- Unpack and Identify Parts: Carefully unpack all components and lay them out on a clean, soft surface (e.g., a carpet) to prevent scratches. Identify each part using the provided parts list.
- Assemble the Headboard and Footboard: Connect the vertical and horizontal bars of the headboard and footboard sections. Ensure all connections are secure but do not fully tighten bolts until the entire frame is assembled.
- Attach Side Rails: Connect the side rails to the assembled headboard and footboard sections. Align the holes and insert bolts, hand-tightening them for now.
- Install Support Legs: Attach any central support legs to the main frame as indicated in your specific product diagram.
- Insert Slats: Place the metal slats into the designated slots or hooks on the side rails. Ensure each slat is properly seated and secured. Some slats may require aiming the iron pipe at a notch and pressing firmly to fix into place.
- Final Tightening: Once all components are in place and aligned, systematically tighten all bolts and screws using the provided tool. Do not overtighten.
- Check Stability: Gently shake the assembled bed frame to ensure it is stable and all connections are secure.
Image 4.1: Aiming the iron pipe at the notch during slat installation.
Image 4.2: Pressing firmly to secure the slat.
Image 4.3: Built-in slats designed to prevent mattress sliding.
5. Operating Instructions (Usage)
Your Yaheetech Metal Bed Frame is designed for use with a 90x190cm mattress. Simply place your mattress directly onto the assembled metal slat base. The robust metal construction and integrated slats provide stable support for your mattress, promoting good air circulation.
The bed frame features a high headboard, allowing for comfortable back support when reading or watching television in bed. The 32 cm clearance between the floor and the bed base provides ample under-bed storage space for boxes, luggage, or other items.
Image 5.1: Illustration of the 32 cm under-bed storage space.
6. Maintenance
To maintain the longevity and appearance of your bed frame, follow these simple maintenance guidelines:
- Cleaning: Wipe the metal frame with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the powder-coated finish.
- Regular Inspection: Periodically inspect all bolts, screws, and connections to ensure they are tight. Retighten any loose fasteners to maintain stability.
- Avoid Moisture: Keep the bed frame in a dry environment to prevent rust.
- Protective Pads: The frame is equipped with protective pads on the legs. Ensure these are intact to prevent scratching floors.
Image 6.1: Key features including protective pads and metal tube construction.
7. Troubleshooting
If you encounter any issues with your bed frame, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bed frame is wobbly or unstable. | Loose bolts or uneven floor. | Ensure all bolts are securely tightened. Move the bed to a level surface or use shims under legs if necessary. |
| Squeaking noises. | Loose connections or friction between metal parts. | Retighten all bolts. Apply a small amount of lubricant (e.g., silicone spray) to connection points if squeaking persists. |
| Mattress slides on the frame. | Mattress not properly seated or lack of friction. | Ensure the mattress is centered on the slats. The built-in slats are designed to minimize sliding; if issues persist, consider a non-slip mat between the mattress and slats. |
8. Specifications
Detailed specifications for the Yaheetech Metal Bed Frame (Model: 613687):
| Feature | Detail |
|---|---|
| Brand | Yaheetech |
| Model Number | 613687 |
| Color | Black |
| Material | Metal |
| Finish Type | Powder Coating |
| Overall Dimensions (L x W x H) | 198.5 x 96.5 x 82.5 cm (78.1 x 38 x 32.5 inches) |
| Compatible Mattress Size | 90 x 190 cm (Single) |
| Under-bed Clearance | 32 cm (12.6 inches) |
| Item Weight | 12 kg (26.5 lbs) |
| Maximum Weight Capacity | 136 kg (300 lbs) |
| Special Features | Squeak-resistant, Light-resistant |
| Components Included | Headboard, Footboard, Side Rails, Slats, Support Legs |
Image 8.1: Dimensional diagram of the bed frame.
9. Warranty and Support
For warranty information or if you require assistance with your Yaheetech Metal Bed Frame, please contact Yaheetech customer service through your purchase platform or the official Yaheetech website. Please have your model number (613687) and purchase details ready when contacting support.
