1. Introduction
Thank you for choosing the LUCCI AIR Riviera Ceiling Fan. This manual provides essential information for the safe installation, operation, and maintenance of your new ceiling fan. Please read these instructions thoroughly before installation and keep them for future reference.
The Riviera ceiling fan is designed for versatile use, suitable for indoor spaces up to 25 square meters, including living rooms, bedrooms, dining rooms, and offices. It can also be installed in protected outdoor areas. Featuring a modern design with four aerodynamic blades and an integrated LED light, this fan offers both comfort and illumination.
Image 1.1: LUCCI AIR Riviera Ceiling Fan with light illuminated.
2. Safety Information
WARNING: To reduce the risk of electric shock, fire, or injury to persons, read and follow all instructions carefully.
- Ensure the main power supply is disconnected before installation or maintenance.
- Installation must be performed by a qualified electrician in accordance with all local electrical codes.
- The mounting structure must be capable of supporting a minimum of 25 kg (55 lbs).
- Do not connect the fan to a dimmer switch or variable speed controller other than the provided remote control.
- Ensure the fan blades are at least 2.3 meters (7.5 feet) from the floor and 0.5 meters (1.6 feet) from any wall or obstruction.
- Do not insert objects into the path of the fan blades.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
3. Package Contents
Carefully unpack your ceiling fan and ensure all components are present and undamaged. If any parts are missing or damaged, contact your retailer immediately.
- Ceiling Fan Motor Housing
- Fan Blades (4)
- Mounting Bracket
- Remote Control with Wall Holder
- Receiver for Remote Control
- LED Light Kit
- Hardware Pack (screws, washers, wire nuts)
- Instruction Manual
Image 3.1: Included remote control for fan operation.
4. Setup & Installation
Before beginning installation, ensure the power is turned off at the circuit breaker. Follow these steps for proper installation:
- Mounting Bracket Installation: Secure the mounting bracket to a ceiling joist or a suitable fan-rated outlet box using the provided hardware. Ensure it is firmly attached and can support the fan's weight.
- Wiring: Connect the fan's electrical wires to your household wiring according to the wiring diagram in the full installation guide. Ensure all connections are secure and insulated with wire nuts. Install the remote control receiver at this stage, connecting it between the household wiring and the fan motor wiring.
- Fan Housing Attachment: Carefully lift the fan motor housing and attach it to the mounting bracket. Ensure all safety screws are tightened.
- Blade Attachment: Attach the four fan blades to the motor housing using the provided screws. Ensure they are securely fastened.
- LED Light Kit Installation: Connect the LED light kit wires to the fan motor housing wires. Secure the LED light kit to the bottom of the fan housing.
Image 4.1: Overview of fan features including 132cm diameter, quiet DC motor (2-31W), four curved blades, LED light (max 12W, 3-step dimmable), 6 speeds, Summer/Winter mode, and memory function.
5. Operating Instructions
Your LUCCI AIR Riviera Ceiling Fan is operated via the included remote control. Ensure the remote has fresh batteries installed.
5.1 Remote Control Functions
- Power On/Off: Press the power button to turn the fan and light on or off.
- Fan Speed: Use the speed buttons (1-6) to adjust the fan's rotation speed. There are 6 speeds available.
- Fan Direction (Summer/Winter Mode): Press the direction button to switch between summer (downward airflow for cooling) and winter (upward airflow for heat distribution) modes.
- Light On/Off: Press the light button to turn the integrated LED light on or off.
- Light Dimming: The LED light is 3-step dimmable. Press the dimming button repeatedly to cycle through the brightness levels (15%, 50%, 100%).
5.2 Memory Function
The fan features a convenient memory function. When the fan is turned off via the wall switch, it will remember the last settings for fan speed and light brightness, and resume these settings when powered on again.
Image 5.1: The integrated LED light offers 3-step dimming (15%, 50%, 100%) and provides 1200 lumens of warm white light.
Image 5.2: The fan utilizes modern DC motor technology for quiet and energy-efficient operation.
6. Maintenance
Regular maintenance ensures optimal performance and extends the life of your ceiling fan.
- Cleaning: To clean the fan, wipe with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish. Ensure the power is off before cleaning.
- Blade Cleaning: Dust the fan blades regularly to prevent dust buildup, which can affect balance and performance.
- Tightening Screws: Periodically check all screws on the fan housing and blades to ensure they are tight. Loose screws can cause noise or wobble.
- No Lubrication Required: The fan's motor is permanently lubricated and does not require additional oiling.
7. Troubleshooting
If you experience issues with your ceiling fan, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not start | No power to the fan Remote control batteries are dead Incorrect wiring | Check circuit breaker and wall switch Replace remote control batteries Verify wiring connections (consult electrician) |
| Fan is noisy | Loose screws Unbalanced blades Motor hum | Tighten all screws Ensure blades are clean and balanced (check for bends) Some motor hum is normal, especially at lower speeds. If excessive, contact support. |
| Fan wobbles | Loose mounting bracket Unbalanced blades Loose blade screws | Ensure mounting bracket is secure Check for bent blades or uneven weight distribution Tighten all blade screws |
| Light does not work | No power to the light Loose wire connection LED light kit failure | Check power supply Verify light kit wiring connections Contact customer support for replacement |
| Remote control not working | Dead batteries Receiver issue Interference | Replace batteries Ensure receiver is correctly wired and functioning Move away from other electronic devices |
If the problem persists after attempting these solutions, please contact customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | LUCCI AIR |
| Model Number | 213351 |
| Color | Black |
| Design | Ceiling Fan with Integrated Light |
| Dimensions (Diameter x Height) | 132 cm (52 inches) x 29 cm (11.4 inches) |
| Weight | 5.5 Kilograms |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Number of Blades | 4 |
| Motor Type | DC Motor |
| Motor Power Consumption | 2 - 31 Watts |
| Voltage | 240 Volts |
| Number of Speeds | 6 |
| Light Type | Integrated LED (GX53 base) |
| Light Output | Max 12W, 1200 Lumens |
| Light Color Temperature | Warm White |
| Light Dimming | 3-step dimmable (15%, 50%, 100%) |
| Control Method | Remote Control |
| Special Features | Summer/Winter Mode, Memory Function, Quiet Operation |
| Room Coverage | Up to 25 m² |
| Usage Environment | Indoor and Protected Outdoor |
| Energy Efficiency | F |
9. Warranty Information
Your LUCCI AIR Riviera Ceiling Fan is covered by the following warranty:
- 2-Year In-Home Warranty: Covers general product defects and service within your home.
- 7-Year Motor Replacement Warranty: Covers replacement of the fan motor.
- 1-Year Extended In-Home Warranty: An additional 1-year in-home warranty is provided when your fan is purchased or installed by a Beacon Trade member.
For detailed warranty terms and conditions, please visit the official Beacon Lighting returns policy page: beaconlighting.com.au/returns-policy
Image 9.1: Summary of warranty coverage for LUCCI AIR and Fanaway fans.
10. Customer Support
For further assistance, technical support, or warranty claims, please contact your retailer or the manufacturer, Beacon Lighting. Ensure you have your model number (213351) and proof of purchase available when contacting support.
