WantJoin Commercial Professional Blender

Introduction

Thank you for choosing the WantJoin Commercial Professional Blender. This powerful appliance is designed for efficient and quiet blending, suitable for both home and commercial use. With its robust 2200W motor, 80oz (2.2L) pitcher, and innovative sound enclosure, it delivers consistent results for a variety of blending tasks, from smoothies and ice crushing to sauces and baby food. Please read this manual thoroughly before operation to ensure safe and optimal performance.

Important Safety Precautions

• Always unplug the blender from the power outlet before cleaning or when not in use.
• Do not immerse the motor base in water or other liquids. Clean with a damp cloth only.
• Keep hands and utensils out of the container while blending to reduce the risk of severe injury to persons or damage to the blender. A tamper may be used only when the main lid is in place through the lid opening.
• Ensure the lid is securely fastened before operating the blender.
• Do not blend hot liquids in large quantities as they may cause pressure buildup and result in scalding.
• Avoid contact with moving parts.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner.
• Close supervision is necessary when any appliance is used by or near children.

Package Contents

Upon unpacking, please ensure all items listed below are present and in good condition:

• WantJoin Commercial Professional Blender Base
• Shield Quiet Sound Enclosure
• Big Volume Pitcher (80 oz / 2.2L) with powerful blade assembly
• Lid with removable vented cap
• Tamper

Product Overview

Figure 1: The WantJoin Commercial Professional Blender, featuring its main unit, large pitcher filled with fruits and ice, and the transparent sound enclosure. A tamper is shown alongside the blender, and a glass of juice with fresh fruit is in the foreground, highlighting its primary use for beverages.

Figure 2: The blender positioned on a kitchen counter, illustrating its compact footprint and the clearance needed for the lid to open. The control panel with its 15 blending modes is visible, emphasizing its ease of use. Key dimensions are overlaid on the image, showing the 23-inch lid opening height and the minimum 1.2-inch distance required above the unit.

Figure 3: A detailed view of the WantJoin blender and its components, including the main unit with the sound enclosure, the tamper, and the pitcher. Dimensions are clearly labeled, indicating the overall size of the assembled blender (9.05"D x 10"W x 19.6"H) and the pitcher (4.3"D x 11.8"H), providing a clear understanding of its physical footprint.

Key Components:

• Motor Base: Houses the powerful 2200W motor and control panel.
• Pitcher: An 80oz (2.2L) capacity container with measurement markings, equipped with durable stainless steel blades and dual-direction blade technology for efficient blending.
• Sound Enclosure: A transparent shield designed to significantly reduce operational noise and prevent splatters.
• Lid with Feeding Hole: Features a removable vented cap, allowing ingredients to be added safely during blending.
• Control Panel: Includes a power button, a dial for 15-speed control, and a Pulse function for quick bursts of power.

Setup

1. Unpack: Carefully remove all components from the packaging. Retain packaging for future storage or transport.
2. Clean: Before first use, wash the pitcher, lid, and tamper with warm, soapy water. Rinse thoroughly and dry. Wipe the motor base with a damp cloth.
3. Placement: Place the motor base on a stable, flat, and dry surface. Ensure there is adequate clearance above the blender (approximately 23 inches) for the sound enclosure to open fully without obstruction.
4. Assemble: Place the pitcher securely onto the motor base. Ensure it is properly seated. Position the sound enclosure over the pitcher and base, ensuring it is correctly aligned.
5. Power Connection: Plug the blender into a standard 110V AC power outlet. The power indicator light will illuminate.

Operating Instructions

Basic Blending:

1. Add Ingredients: Place your desired ingredients into the pitcher. Do not exceed the MAX fill line (80oz / 2.2L).
2. Secure Lid: Place the lid firmly onto the pitcher and ensure the sound enclosure is closed.
3. Select Speed: Turn the speed dial to the desired setting (1-15). For initial blending, start with a lower speed and gradually increase as needed.
4. Pulse Function: For quick bursts of power or to break down larger chunks, use the Pulse button.
5. Add Ingredients During Blending: If necessary, remove the small vented cap from the lid to add ingredients while the blender is operating. Use the tamper through this opening to push ingredients towards the blades if they become stuck.
6. Finish Blending: Once desired consistency is achieved, turn the speed dial to 'OFF' and then press the power button to turn off the unit.

Figure 4: An exploded view illustrating the powerful blade and motor system of the WantJoin blender, designed for efficient ice crushing in as little as 5 seconds. This powerful mechanism ensures smooth and consistent results, capable of producing enough blended drinks for up to 11 cups per session.

Figure 5: A user interacting with the WantJoin blender, highlighting its human-centric design features. The image points out the noise reduction design, the convenient feeding lid design for adding ingredients, and overall safety features, all contributing to an enhanced user experience and secure grip during operation.

Recipe Examples:

Carrot Juice: Carrot 3.52oz, Pineapple 1.76oz, Half a lemon, Honey 1.01oz (approximately 2 spoons), Water 10.14ml.

Banana Milkshake: Banana x2, Kiwifruit x1, Milk 8.54oz, Condensed milk 1 spoon.

Berry Smoothie: Blueberry 3.52oz, Strawberry 3.52oz, Raspberry 3.52oz, Yogurt 5.29oz, 5-6 ice cubes.

Almond Milk: 8 oz raw almonds (unsalted), 23 oz water, 4 pitted dates, ½ tsp vanilla extract.

Maintenance

Cleaning:

1. Self-Cleaning Function: For quick and easy cleaning, add warm water and a drop of dish soap to the pitcher. Secure the lid and sound enclosure. Run the blender on a medium speed for 30-60 seconds, or use the Pulse function several times. Rinse thoroughly.
2. Manual Cleaning: For a more thorough clean, disassemble the pitcher, lid, and tamper. Wash with warm, soapy water using a brush for hard-to-reach areas around the blades. Rinse and dry completely before reassembling or storing.
3. Motor Base: Wipe the motor base with a damp cloth. Do not immerse in water.
4. Sound Enclosure: Wipe the sound enclosure with a damp cloth. For stubborn stains, use a mild detergent.

Figure 6: The WantJoin blender demonstrating its hands-free, one-click self-cleaning feature. The pitcher is filled with water, and a finger is shown pressing the 'Pulse' button on the control panel, indicating the ease of initiating the cleaning cycle.

Storage:

Store the blender in a clean, dry place. Ensure all parts are dry before storage to prevent mold or mildew growth.

Troubleshooting

Specifications

• Brand: WantJoin
• Model Number: WZSBK90SRUS
• Color: Silver
• Power: 2200W
• Voltage: 110 Volts
• Capacity: 2.2 Liters (80 oz)
• Number of Speeds: 15
• Blade Material: Stainless Steel
• Product Dimensions: 12"D x 11"W x 20"H
• Item Weight: 16.5 pounds
• Special Feature: Multiple Speeds, Quiet Sound Enclosure, Self-Cleaning
• Recommended Uses: Smoothies, Ice Crush, Pureeing, Grinding, Crushing, Pulse, Chopping, Mixing, Blending, Whipping, Emulsifying

Warranty and Support

WantJoin is committed to providing high-quality products and customer satisfaction. While specific warranty details are not provided in this manual, WantJoin offers 24/7 customer support for any inquiries or assistance you may need regarding your blender. Please refer to the product packaging or the official WantJoin website for detailed warranty information and to contact customer service.

For additional support, you may also refer to the official Instructions for Use (IFU) PDF.