Introduction
Thank you for choosing WallarGe Wireless Headphones. This manual provides detailed instructions for setting up, operating, and maintaining your new RF wireless headphones with a charging dock. Designed for TV watching, these headphones offer a stable and reliable connection up to 100 feet, even through walls, ensuring high-quality audio without disturbing others. Enjoy a comfortable listening experience with easy plug-and-play functionality and a long-lasting rechargeable battery.
Image: WallarGe Wireless Headphones on their charging dock.
What's in the Box
- Wireless Headphones
- Charging Station
- AC Adapter
- User Manual
- 2-Male to 2-Male RCA cable
- AUX 3.5mm to 2-Male RCA cable
- Optical Audio Cable
Setup
The WallarGe wireless headphones are designed for easy plug-and-play setup. The headphones and RF transmitter dock are pre-paired at the factory. Simply connect the transmitter to your TV's audio output using one of the provided cables.
Connection Options
Your TV may have different audio output ports. Please identify the available ports on your TV and use the corresponding cable.
Image: Back of the charging dock showing various audio input options.
- Optical Audio Cable: For TVs with an Optical (TOSLINK) audio output. Connect one end to the TV's Optical Out port and the other to the 'OPTICAL' input on the charging dock. Ensure your TV's audio output is set to PCM format if using optical.
- AUX 3.5mm to 2-Male RCA cable: For TVs with a 3.5mm headphone jack or audio output. Connect the 3.5mm end to your TV's headphone jack and the RCA ends to the 'R' and 'L' audio inputs on the charging dock.
- 2-Male to 2-Male RCA cable: For TVs with RCA (red and white) audio output ports. Connect the RCA ends to the 'R' and 'L' audio inputs on the charging dock.
After connecting the audio cable, plug the AC adapter into the charging dock's 'DC IN' port and then into a power outlet. The 'POWER' indicator on the dock will light up.
Operating Instructions
Power On/Off
To power on the headphones, slide the 'ON-U-OFF' switch to the 'ON' position. To power off, slide it to 'OFF'.
Charging the Headphones
Place the headphones onto the charging dock. The 'CHARGE' indicator on the dock will light up, indicating that the headphones are charging. A full charge provides up to 20 hours of uninterrupted use. It is recommended to fully charge the headphones before first use.
Image: Headphones on charging dock, illustrating the built-in rechargeable battery and 20-hour battery life.
Volume Control
Adjust the volume using the '+ / -' buttons located on the headphones.
Wireless Range
The RF transmitter provides a stable wireless range of up to 100 feet (30 meters), allowing you to move freely around your home while listening.
Image: Illustration of the headphones' long transmission distance, showing a user listening from another room.
Bluetooth Functionality
These headphones also feature an additional Bluetooth function, allowing them to be used independently with other Bluetooth-enabled devices. Refer to the specific pairing instructions for Bluetooth mode.
Image: Close-up of the headphone's side, highlighting the Bluetooth function.
Maintenance
To ensure the longevity of your WallarGe headphones, follow these maintenance guidelines:
- Clean the ear pads and headband regularly with a soft, dry cloth.
- Avoid exposing the headphones or charging dock to extreme temperatures, humidity, or direct sunlight.
- Do not use abrasive cleaners or solvents.
- Store the headphones on the charging dock when not in use to keep them charged and ready.
Troubleshooting
If you encounter issues with your WallarGe Wireless Headphones, please refer to the following common solutions:
No Sound from Headphones
- Check Connections: Ensure all cables (audio and power) are securely connected to the TV and the charging dock.
- TV Audio Output Settings: Verify that your TV's audio output settings are correctly configured for the connected cable type (e.g., PCM for optical).
- Headphone Power and Volume: Make sure the headphones are powered on and the volume is turned up.
- Charging: Ensure the headphones are sufficiently charged. A low battery can cause sound issues.
Relevant Troubleshooting Videos:
Specifications
| Feature | Detail |
|---|---|
| Model Name | Headphones |
| Connectivity Technology | Wireless |
| Wireless Communication Technology | RF |
| Headphones Jack | 3.5 mm Jack |
| Noise Control | None |
| Battery Life | 20 Hours |
| Charging Time | 20 Hours (for full charge) |
| Material | Cotton |
| Ear Placement | Over Ear |
| Form Factor | Over Ear |
| Frequency Range | 20Hz - 20,000Hz |
| Impedance | 20 Ohm |
| Product Dimensions | 8.62 x 8.62 x 5.08 inches |
| Item Weight | 0.205 ounces |
| Compatible Devices | Television |
Warranty and Support
WallarGe products typically come with a standard manufacturer's warranty. Please refer to the warranty information included in your product packaging for specific terms and conditions. For technical support, troubleshooting assistance, or any inquiries regarding your WallarGe Wireless Headphones, please contact WallarGe Direct customer service. Contact details can usually be found on the product packaging or the official WallarGe website.
