Introduction
Thank you for choosing WallarGe Wireless Headphones. This manual provides detailed instructions for setting up, operating, and maintaining your headphones to ensure optimal performance and a comfortable listening experience. These headphones are designed to provide high-quality audio for TV watching with a stable RF wireless connection, allowing you to enjoy your favorite programs without disturbing others.
What's Included
Your WallarGe Wireless Headphones package includes the following components:
- Wireless Headphones
- RF Transmitter Charging Dock
- AC Adapter
- User Manual (this document)
- 2-Male to 2-Male RCA Cable
- AUX 3.5mm to 2-Male RCA Cable
- Optical Audio Cable
Setup
The WallarGe wireless headphones and RF transmitter dock are pre-paired at the factory for ease of use. Follow these steps to connect them to your TV.
1. Powering the Transmitter Dock
Connect the AC adapter to the 'DC IN' port on the back of the transmitter dock and plug it into a power outlet. The 'POWER' indicator light on the dock will illuminate.
2. Connecting to Your TV (Audio Output Options)
Choose the appropriate cable based on your TV's available audio output ports. Ensure your TV's audio output settings are configured correctly for the chosen connection type.
Option A: Optical Audio Cable (Recommended for Digital Audio)
Connect one end of the optical audio cable to the 'OPTICAL' port on the transmitter dock and the other end to your TV's optical digital audio output port (often labeled 'Optical Out' or 'Digital Audio Out').
Important: For optical connections, you may need to adjust your TV's audio output settings to PCM (Pulse Code Modulation) format. Navigate to your TV's audio settings menu and look for 'Digital Audio Output Format' or 'HDMI Input Audio Format' and select 'PCM'.
Option B: RCA Audio Cables (Red/White)
Connect the 2-Male to 2-Male RCA cable to the 'R' (red) and 'L' (white) audio input ports on the transmitter dock. Connect the other end to your TV's 'Audio Out' RCA ports (red and white).
Option C: AUX 3.5mm to 2-Male RCA Cable
If your TV has a 3.5mm headphone jack output, connect the 3.5mm end of the AUX cable to your TV's headphone jack. Connect the RCA ends (red and white) to the 'R' and 'L' audio input ports on the transmitter dock.
Operating Instructions
Powering On/Off and Signal Connection
Once the transmitter dock is connected to your TV and powered on, turn on your headphones using the 'ON-U-OFF' switch located on the earcup. The 'SIGNAL' indicator light on the dock will turn green when a stable audio signal is detected from your TV.
Volume Control
Adjust the volume directly on the headphones using the volume control buttons (+/-) located on the earcup. You can also adjust the TV's volume, but for optimal sound quality, it's recommended to set the TV volume to a moderate level and control the final volume via the headphones.
Wireless Range
The WallarGe headphones offer a wireless range of up to 100 feet (30 meters), even through walls. This allows you to move freely around your home while maintaining clear audio from your TV.
Bluetooth Function (HP003 Model Specific)
The HP003 model includes an additional Bluetooth function, allowing the headphones to be used independently with other Bluetooth-enabled devices like smartphones or tablets. To switch between TV (RF) and Bluetooth mode, slide the Bluetooth/TV switch on the earcup to the appropriate position. Refer to your device's Bluetooth pairing instructions to connect the headphones.
Maintenance
Charging the Headphones
To charge the headphones, simply place them onto the charging dock. The 'CHARGE' indicator light on the dock will illuminate (typically red while charging, turning green or off when fully charged). A full charge provides up to 20 hours of uninterrupted use.
Important Tip: Please fully charge the headphones before first use to extend battery life. If the battery is about to run out, you will hear a 'low battery' tone.
Cleaning
Wipe the headphones and charging dock with a soft, dry cloth. Do not use abrasive cleaners or immerse the devices in water.
Troubleshooting
If you encounter issues with your WallarGe Wireless Headphones, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No Sound / Intermittent Sound |
|
|
| Hissing / Clicking Noise |
|
|
| Headphones not charging |
|
|
Instructional Videos for Common Issues:
Solutions for Samsung TV no Sound
This video provides guidance on resolving no sound issues specifically with Samsung TVs when using the headphones.
Instructional Video - Use Bluetooth to Connect
Learn how to connect your WallarGe headphones to other devices using Bluetooth.
Solutions for LG TV NO SOUND
This video offers solutions for no sound issues specifically with LG TVs.
Hissing/ Clicking Noise
A short video demonstrating and addressing hissing or clicking noises.
Solution for SONY TV No Sound
This video provides solutions for no sound issues specifically with SONY TVs.
Solutions for Roku Streaming Stick No Sound
This video addresses no sound issues when using a Roku Streaming Stick.
Specifications
| Feature | Detail |
|---|---|
| Model Name | WIRELESS HEADPHONES (HP003) |
| Connectivity Technology | Wireless (RF 5.8GHz) |
| Wireless Range | Up to 100 feet (30 meters) |
| Battery Life | Up to 20 Hours |
| Charging Time | Approximately 20 Hours (for full charge) |
| Earpiece Shape | Over Ear |
| Control Type | Button Control, Touch |
| Compatible Devices | Television (via Optical, AUX, RCA) |
| Item Weight | 0.205 ounces |
| Color | Black with Blue |
| Manufacturer | ShenZhen litian technology Co.,Ltd |
| Date First Available | January 3, 2022 |
Warranty and Support
WallarGe products are designed for reliability and performance. For warranty information, please refer to the documentation provided with your purchase or contact WallarGe customer support directly. For technical assistance or further inquiries, please visit the official WallarGe store on Amazon or contact their customer service team.
WallarGe Direct Store: Visit Store
