1. Introduction
This manual provides essential information for the safe and effective use of your BestQool Redot S Red Light Therapy Belt. Please read all instructions carefully before operation and retain this manual for future reference.
The BestQool Redot S Red Light Therapy Belt is designed to deliver red light (660nm) and near-infrared light (850nm) to various body areas. It features a flexible, wearable design for convenient application.
2. Safety Information
- Consult a healthcare professional before using this device if you have any medical conditions, are pregnant, or are taking medications.
- Do not use the device on broken skin, open wounds, or areas with active infections.
- Avoid direct eye exposure to the light. Protective eyewear is recommended during use.
- Keep the device out of reach of children.
- Do not immerse the device in water or other liquids.
- Unplug the device from the power source when not in use or before cleaning.
- If you experience any discomfort, redness, or irritation, discontinue use immediately.
- For the highest intensity setting, limit use to under 20 minutes to avoid excessive heat.
3. Package Contents
Verify that all items are present in your package:
- BestQool Redot S Red Light Therapy Belt
- Power Adapter
- Controller
- Connection Wire (for power bank option)
- User Manual

Figure 1: Product Accessories including the power adapter, controller, and connection wire.
4. Setup
4.1 Connecting the Device
- Connect the Controller: Locate the connection port on the Redot S belt. Align the arrow on the controller's connector with the port and firmly insert it.
- Power Options:
- Wall Outlet: Connect the power adapter to the controller, then plug the adapter into a standard AC 85-265V wall outlet.
- Power Bank (Not Included): Use the provided connection wire to connect the controller to a compatible power bank. The belt features a pocket to hold the power bank.

Figure 2: Flexible power supply options for the Redot S belt.
4.2 Performing a Light Sensitivity Test
Before initial full use, perform a light sensitivity test to ensure comfort and prevent potential irritation:
- Place the belt on a small area of your arm.
- Leave it for 5-10 minutes.
- Remove the belt and wait 30 minutes.
- If no discomfort or adverse reaction occurs, proceed with regular use.

Figure 3: Light Sensitivity Test procedure.
5. Operating Instructions
5.1 Basic Operation
- Power On/Off: Press the ON/OFF button on the controller to turn the device on. The display will show 'OFF' when powered off. Press again to turn it on.
- Adjust Intensity: Use the '+' and '-' buttons to select one of four intensity levels (L1-L4), with L4 being the highest.
- Set Treatment Time: Press the 'TIME' button to cycle through available treatment durations: 15, 30, 45, or 60 minutes.
- Switch Modes: Press the 'MODE' button to select the desired light mode: '660' for Red light, '850' for Near-infrared light, or 'ALL' for both Red and Near-infrared light.
- Pulse Mode: To activate pulse mode (10 Hz), press the ON/OFF button again after selecting your desired settings. The display will show '10 HZ'.

Figure 4: Controller functions for the Redot S belt.
5.2 Application Areas and Guidelines
The flexible design allows for application on various body parts. Ensure the belt is placed directly on bare skin for optimal results.

Figure 5: Versatile application areas for the Redot S belt.

Figure 6: Red Light Therapy Guidelines for various body parts.
5.3 Video Demonstration
Video 1: A step-by-step guide on how to operate the BestQool Redot S controller, demonstrating power on/off, intensity adjustment, time setting, and mode switching.
6. Maintenance
- Cleaning: Ensure the device is unplugged before cleaning. Wipe the surface of the belt with a soft, damp cloth. Do not use abrasive cleaners or submerge the device.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures. Roll or fold the belt gently to avoid damaging the LEDs.
7. Troubleshooting
- Device Not Turning On:
- Check if the power adapter is securely connected to both the device and the wall outlet.
- Ensure the wall outlet is functional.
- If using a power bank, ensure it is charged and properly connected.
- Lights Not Emitting:
- Verify the device is powered on and not in 'OFF' mode.
- Check the selected mode (Red, Near-infrared, or All). Near-infrared light is not visible to the naked eye.
- Discomfort During Use:
- Reduce the intensity level.
- Shorten the treatment duration.
- Ensure the device is not used on sensitive or irritated skin.
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | Redot S |
| Product Dimensions | 48.8 x 5 x 0.31 inches |
| Weight | 14.72 ounces |
| Light Coverage Area | 21.5" x 5.0" |
| Wavelengths | 660nm (Red Light), 850nm (Near-Infrared Light) |
| Power Consumption | 21W |
| Voltage | AC 85-265V |
| Material | TPU soft rubber and diving material |
9. Warranty and Support
9.1 Warranty Information
The BestQool Redot S Red Light Therapy Belt includes a warranty. Please refer to the product packaging or the official BestQool website for specific warranty terms and conditions. A 30-day testing period is typically offered to ensure customer satisfaction.
9.2 Customer Support
For any questions, technical assistance, or support needs, please contact BestQool customer service:
- WhatsApp (Text+Pics): +1 3195123212
- Refer to the official BestQool website for additional contact methods.