Altec Lansing IMW1400-BLK

Altec Lansing HydraBoom Bluetooth Speaker User Manual

Model: IMW1400-BLK

Brand: Altec Lansing

1. Introduction

Welcome to your Altec Lansing HydraBoom Bluetooth Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker. The HydraBoom is designed for robust performance, featuring IP67 waterproof and dustproof ratings, wireless phone charging, and vibrant LED light modes, making it ideal for both indoor and outdoor use.

2. What's in the Box

3. Product Overview and Key Features

Key Features

Front view of the Altec Lansing HydraBoom speaker showcasing its dual speaker grilles and illuminated LED light strips.

Front view of the Altec Lansing HydraBoom speaker showcasing its dual speaker grilles and illuminated LED light strips.

Side view of the Altec Lansing HydraBoom speaker highlighting the control panel with buttons for volume, voice control, LED light control, True Wireless Pairing, and power.

Side view of the Altec Lansing HydraBoom speaker highlighting the control panel with buttons for volume, voice control, LED light control, True Wireless Pairing, and power.

Altec Lansing HydraBoom speaker standing vertically with a smartphone placed on top, demonstrating its wireless charging capability, with water splashes in the background.

Altec Lansing HydraBoom speaker standing vertically with a smartphone placed on top, demonstrating its wireless charging capability, with water splashes in the background.

4. Setup

Charging the Speaker

Bluetooth Pairing

  1. Power on the HydraBoom speaker by pressing and holding the Power button.
  2. The Bluetooth indicator light will flash, indicating it's in pairing mode.
  3. On your device (smartphone, tablet, etc.), enable Bluetooth and search for "Altec Lansing HydraBoom".
  4. Select the speaker from the list to connect. The Bluetooth indicator will turn solid when connected.

True Wireless Pairing (TWS)

  1. Ensure both HydraBoom speakers are powered on and not connected to any device.
  2. On one speaker, press the True Wireless Pairing button. It will begin searching for another speaker.
  3. Once connected, both speakers will play audio in stereo.

5. Operating Instructions

Controls Overview

ButtonFunction
Volume Up (+)Increase volume
Voice Control (Microphone icon)Activate voice assistant (Siri, Google Assistant)
Volume Down (-)Decrease volume
LED Light Control (Sun/Star icon)Cycle through 11 LED light modes
True Wireless Pairing (Interlocking arrows icon)Initiate True Wireless Stereo pairing with another HydraBoom speaker
Power On/Off (Power icon)Press and hold to power on/off

LED Light Modes

The speaker features 11 LED light modes. Press the LED Light Control button to cycle through different modes, including beat, strobe, and pulse, to enhance your listening experience.

Wireless Phone Charging

Place your Qi-enabled smartphone on the designated wireless charging area on top of the speaker. Ensure proper alignment for charging to begin. The speaker doubles as a convenient charging pad for your compatible devices.

6. Maintenance

Waterproof and Dustproof (IP67)

The HydraBoom speaker is IP67 rated, meaning it is protected from dust ingress and can withstand immersion in water up to 1 meter for 30 minutes. Ensure all port covers are securely closed before exposing the speaker to water to maintain its waterproof integrity.

Altec Lansing HydraBoom speaker placed near water, illustrating its IP67 waterproof and dustproof rating.

Altec Lansing HydraBoom speaker placed near water, illustrating its IP67 waterproof and dustproof rating.

Cleaning

Clean the speaker with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the speaker's finish or internal components.

Storage

Store the speaker in a cool, dry place when not in use for extended periods. Avoid extreme temperatures and direct sunlight.

7. Troubleshooting

ProblemSolution
Speaker won't turn onEnsure the speaker is fully charged. Press and hold the Power button for a few seconds.
Cannot pair via BluetoothEnsure the speaker is in pairing mode (flashing Bluetooth light). Check your device's Bluetooth settings and make sure it's discoverable. Move closer to the speaker.
No soundCheck volume levels on both the speaker and your connected device. Ensure the speaker is properly paired.
Wireless charging not workingEnsure your phone is Qi-enabled and properly aligned on the charging pad. Remove any thick phone cases.
Short battery lifeEnsure the speaker is fully charged. Battery life can vary based on volume and LED light usage.

8. Specifications

FeatureDetail
Model NameHydraBoom
Item Model NumberIMW1400-BLK
BrandAltec Lansing
Connectivity TechnologyBluetooth, USB
Wireless Communication TechnologyBluetooth
Bluetooth Range30.48 Meters (100 Feet)
Speaker TypeWoofer
Woofer Diameter2.5 Inches
Speaker Maximum Output Power6 Watts
Audio Output ModeStereo
Water Resistance LevelWaterproof (IP67)
Battery Life20 Hours
Charging Time20 Hours
Power SourceBattery Powered
MaterialPlastic, Metal
ColorBlack
Item Weight3.49 Pounds
Product Dimensions5.5 x 11.1 x 6.1 inches
UPC021331023728
ManufacturerAltec Lansing Inc
Warranty TypeLimited

9. Warranty and Support

Warranty Information

The Altec Lansing HydraBoom Bluetooth Speaker comes with a Limited Warranty. For complete details regarding warranty coverage, terms, and conditions, please refer to the documentation included with your product or visit the official Altec Lansing website.

Customer Support

For further assistance, technical support, or inquiries about your HydraBoom speaker, please visit the Altec Lansing Store on Amazon or their official website. You can also find FAQs and additional resources there.

Related Documents - IMW1400-BLK

Preview Altec Lansing IMW1400 HydraBoom Wireless Speaker Quick Start Guide
A quick start guide for the Altec Lansing IMW1400 HydraBoom Everythingproof™ Wireless Speaker, covering setup, controls, Bluetooth pairing, True Wireless Stereo pairing, and light modes.
Preview Altec Lansing HydraBoom IMW1400: Wireless Speaker Quick Start Guide & Specs
Your essential guide to the Altec Lansing HydraBoom IMW1400 wireless speaker. Learn about setup, controls, TWS pairing, charging, technical specifications, safety, and warranty information.
Preview Altec Lansing HydraBoom 2.0 EVERYTHINGPROOF Wireless Speaker - Quick Start Guide & Manual
Get started with your Altec Lansing HydraBoom 2.0 EVERYTHINGPROOF Wireless Speaker. This guide covers setup, charging, Bluetooth pairing, controls, safety, specifications, and warranty.
Preview Altec Lansing Boom Jacket II Rugged Bluetooth Speaker Quick Start Guide
Quick start guide for the Altec Lansing Boom Jacket II rugged Bluetooth speaker, covering setup, pairing, features, charging, warranty, and support information.
Preview Altec Lansing ATP3 Computer Speaker System User Guide and Setup
Comprehensive user guide for the Altec Lansing ATP3 computer speaker system, covering specifications, setup instructions, safety precautions, and control usage.
Preview Altec Lansing TOUGHBOXX Rugged Wireless Speaker IMT1030 Quick Start Guide and Manual
Comprehensive guide for the Altec Lansing TOUGHBOXX Rugged Wireless Speaker (IMT1030), covering setup, features, Bluetooth pairing, TWS/Party Sync, FM radio, charging, safety, specifications, and warranty information.