Multi TCA27QM Multifunction Alarm Clock User Manual

1. Introduction

Thank you for purchasing the Multi TCA27QM Multifunction Alarm Clock. This device combines a digital alarm clock with an LED night light, a 5W wireless charging pad for Qi-compatible devices, and a USB charging port. It also features a clear LCD display showing time, date, and room temperature. Please read this manual carefully to ensure proper use and maintenance of your device.

2. Safety Information

• Do not expose the device to water or excessive moisture.
• Avoid placing the device near heat sources or in direct sunlight.
• Do not attempt to disassemble or modify the device. This will void the warranty.
• Use only the provided power adapter or a certified equivalent.
• Keep out of reach of children.
• Ensure proper ventilation when using the wireless charging function.

3. Package Contents

Please check the package for the following items:

• Multi TCA27QM Multifunction Alarm Clock
• Power Adapter (may be integrated or separate)
• User Manual (this document)

4. Product Overview

Familiarize yourself with the components of your alarm clock:

Figure 1: Front View. This image displays the front of the Multi TCA27QM alarm clock, highlighting its large digital time display, date, temperature, and day of the week. The integrated LED night light is visible at the base, and control buttons are located on the top edge.

Figure 2: Wireless Charging Function. This image shows the alarm clock from an angle, with a smartphone resting on the designated wireless charging area at its base, demonstrating the device's charging capability.

Figure 3: Rear View. The back of the alarm clock is shown, featuring the USB charging output port, the power input port, and speaker grilles.

Control Buttons (Top Panel):

• SET Button: Enters setting mode for time, date, and alarm.
• UP/DOWN Buttons: Adjust values during setting mode; also control display brightness.
• ALARM Button: Activates/deactivates alarm and enters alarm setting mode.
• SNOOZE/LIGHT Button: Snoozes alarm; activates/deactivates night light.

Other Features:

• LCD Display: Shows time, date, day, and temperature.
• LED Night Light: Located at the base, touch-activated.
• Wireless Charging Pad: For Qi-compatible devices (5W).
• USB Charging Port: For wired charging of other devices.
• Power Input Port: Connects to the power adapter.

5. Setup

5.1 Power Connection

1. Connect the power adapter to the Power Input Port on the back of the alarm clock.
2. Plug the adapter into a standard wall outlet. The display will light up.

5.2 Initial Time and Date Setting

1. Press and hold the SET button for 3 seconds to enter time setting mode. The hour digits will flash.
2. Use the UP or DOWN buttons to adjust the hour.
3. Press SET again to confirm the hour and move to minute setting. Adjust with UP/DOWN.
4. Continue pressing SET to cycle through and set the year, month, and day using the UP/DOWN buttons.
5. After setting the day, press SET one last time to exit setting mode.

Note: The device may use internal batteries for backup in case of power loss, but it primarily operates via the power adapter. No user-replaceable batteries are typically required for basic operation.

6. Operating Instructions

6.1 Setting and Activating Alarms

1. Press and hold the ALARM button for 3 seconds. The alarm hour digits will flash.
2. Use the UP or DOWN buttons to set the desired alarm hour.
3. Press ALARM again to confirm the hour and set the minutes. Adjust with UP/DOWN.
4. Press ALARM one more time to exit alarm setting mode.
5. To activate or deactivate the alarm, short press the ALARM button. An alarm icon will appear/disappear on the display.

6.2 Snooze Function

When the alarm sounds, press the SNOOZE/LIGHT button to activate the snooze function. The alarm will temporarily stop and sound again after approximately 9 minutes.

6.3 Night Light Operation

Figure 4: Night Light in Use. This image shows the alarm clock on a bedside table in a dimly lit room, with its integrated LED night light providing a soft glow.

• The LED night light is activated by touching the side of the device.
• Touch the side again to cycle through brightness levels or turn off the light.

6.4 Display Brightness Adjustment

Short press the UP or DOWN buttons (when not in setting mode) to adjust the brightness of the LCD display.

6.5 Wireless Charging

Figure 5: Multiple Charging Options. The alarm clock is shown on a desk, simultaneously charging a smartphone wirelessly on its base and another device via its USB port, demonstrating its versatility.

• Place your Qi-compatible mobile device directly onto the wireless charging pad located at the base of the alarm clock.
• Ensure the device is centered on the pad for optimal charging.
• A charging indicator (if available on your phone) will confirm charging has begun.

6.6 USB Charging

• Connect your device's USB charging cable to the USB Charging Port on the back of the alarm clock.
• Connect the other end of the cable to your device. Charging will begin automatically.

6.7 Temperature Display

The alarm clock automatically displays the ambient room temperature. No manual adjustment is required for this feature.

7. Maintenance

• To clean the device, wipe it with a soft, dry cloth.
• Do not use abrasive cleaners or solvents.
• Keep the wireless charging pad free of dust and debris to ensure efficient charging.
• When not in use for extended periods, unplug the power adapter.

8. Troubleshooting

9. Specifications

10. Warranty and Support

This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer. For technical support or inquiries, please contact the customer service department of your retailer.

Please retain your proof of purchase for warranty claims.