Inateck P6 Barcode Scanner and BS04001 Charging Base User Manual

1. Introduction

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your Inateck P6 Barcode Scanner and BS04001 Charging Base. Please read this manual thoroughly before using the product to ensure proper functionality and longevity.

2. Package Contents

Upon opening the package, please verify that all the following items are present:

• Inateck P6 Barcode Scanner
• Inateck BS04001 Charging Base
• USB Wireless Receiver (Dongle)
• USB-C to USB-A Charging/Data Cable
• User Manual (this document)

Image: The Inateck BS04001 Charging Base displayed with its accompanying USB-C and USB-A cables, ready for connection.

3. Setup

3.1 Charging the Scanner

1. Connect the USB-C end of the provided cable to the charging port on the BS04001 Charging Base.
2. Connect the USB-A end of the cable to a power adapter (not included) or a computer's USB port.
3. Place the Inateck P6 Barcode Scanner into the charging slot of the base. Ensure it is seated correctly.
4. The indicator light on the base will illuminate to show charging status. A full charge can provide up to 180,000 scans.

3.2 Connecting the Scanner

The Inateck P6 Barcode Scanner connects wirelessly via its USB receiver.

1. Insert the USB Wireless Receiver into an available USB port on your computer or host device.
2. Turn on the Inateck P6 Barcode Scanner using the physical switch located on the handle.
3. The scanner will automatically pair with the receiver. A successful connection is indicated by a specific sound or light pattern (refer to scanner's LED indicators for details).

Image: The Inateck P6 Barcode Scanner shown alongside its compact USB wireless receiver, ready for connection to a host device.

4. Operating Instructions

4.1 Basic Scanning

To scan a barcode, point the scanner's lens at the barcode and press the trigger button. The scanner will emit a light beam and a successful scan will be indicated by an audible beep and/or a visual confirmation.

4.2 Inventory Mode

The scanner features an Inventory Mode, allowing you to store scanned data directly on the device and count the number of items. This is useful for inventory management without a constant connection to a host system.

Image: A hand holding the Inateck P6 Barcode Scanner, demonstrating its use in Inventory Mode to store and count scanning results from a package.

4.3 Super Decoding Ability

The Inateck P6 scanner is equipped with an Intelligent Machine Learning Algorithm, enabling it to decode various barcode conditions efficiently. It can read blurring, incomplete, and even barcodes with up to 128 digits. This includes common barcodes like EAN, UPC, and Code128, as well as less common ones such as USPS, FedEx, Code 32, and VIN.

Image: A close-up view of the Inateck P6 scanner's lens, illustrating its capability to accurately read damaged, angled (up to 80°), and blurred barcodes, such as the example barcode 0036000291452.

4.4 Transmission Range

Thanks to PA wireless technology, the scanner offers a valid transmission range of up to 60 meters indoors, which is approximately 5 times longer than similar scanners. This results in a total transmission area of up to 1800 square meters.

Image: A diagram illustrating the wireless coverage area of the Inateck P6 Barcode Scanner, showing a transmission range of 60-100 meters in open air and 60 meters indoors, covering an area of 1800m².

4.5 Physical Features

The scanner includes a physical ON/OFF switch for power management and a hooking ring for convenient attachment or storage.

Image: A detailed view of the Inateck P6 Barcode Scanner, highlighting the location of the physical ON/OFF switch and the integrated hooking ring on the device's body.

5. Maintenance

5.1 Cleaning

To maintain optimal performance, regularly clean the scanner's lens and exterior. Use a soft, dry, lint-free cloth. For stubborn dirt, a slightly damp cloth with mild soap can be used, ensuring no liquid enters the device. Do not use abrasive cleaners or solvents.

5.2 Battery Care

The scanner is equipped with a large 2600mAh capacity battery. To prolong battery life:

• Charge the scanner fully before first use.
• Avoid completely draining the battery frequently.
• Store the scanner in a cool, dry place when not in use for extended periods.

6. Troubleshooting

If you encounter issues with your Inateck P6 Barcode Scanner or BS04001 Charging Base, refer to the following common problems and solutions:

• Scanner not connecting: Ensure the USB wireless receiver is properly inserted into the host device and the scanner is powered on. Try re-pairing the scanner if necessary (refer to specific pairing instructions in the full manual, if available).
• Scanner not scanning: Check if the scanner is fully charged. Ensure the barcode is clean, undamaged, and within the scanner's reading range and angle.
• Charging base indicator not lighting up: Verify that the USB cable is securely connected to both the charging base and a power source. Ensure the power source is active.
• Intermittent scanning: This could be due to being at the edge of the wireless transmission range. Try moving closer to the USB receiver.

7. Specifications

Image: Visual demonstration of the Inateck P6 Barcode Scanner's robust construction, highlighting its ability to endure a 1.8-meter drop without damage.

8. Warranty and Support

Inateck products are designed for reliability and performance. For warranty information and technical support, please refer to the official Inateck website or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.