Introduction
Thank you for choosing the Baxton Studio Milligan Full Size Daybed. This manual provides essential information for the safe assembly, proper use, and maintenance of your new daybed. Please read all instructions carefully before beginning assembly and retain this manual for future reference.
Important Safety Information:
- This product requires careful assembly to avoid instability or collapse.
- Do not exceed the maximum weight recommendation of 500 pounds to ensure safety and longevity of the daybed.
- Always ensure all fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
Setup and Assembly
The Baxton Studio Milligan Daybed requires assembly. It is recommended that two adults perform the assembly. Ensure all parts are present before beginning. A power drill may be required for certain steps, particularly for securing the wood slats.
Required Tools (Not Included):
- Phillips Head Screwdriver
- Rubber Mallet (optional, for gentle tapping)
- Power Drill (recommended for wood slat installation)
Assembly Steps:
- Unpack Components: Carefully remove all parts from the packaging. Lay them out on a soft, clean surface to prevent scratches. Verify all hardware and components are present against the included parts list.
- Attach Legs: Securely attach the four tapered legs to the main frame of the daybed using the provided hardware. Ensure they are firmly tightened.
- Assemble Frame: Connect the backrest and side panels to form the main structure of the daybed. Follow the specific diagrams in your included assembly guide for correct orientation and hardware usage.
- Install Slat System: Position the wood slats across the bed frame. These slats provide essential mattress support and eliminate the need for a box spring. Secure each slat to the frame using screws. A power drill is recommended for this step to ensure secure fastening.
- Final Inspection: Once assembled, gently lift and move the daybed to its desired location. Double-check all connections and fasteners to ensure they are tight and secure.
Image: The internal wood slat support system, designed to hold a full-size mattress without a box spring.
Image: Detail of one of the dark brown tapered legs, which provide stability and elevate the daybed.
Operating Instructions (Usage)
The Baxton Studio Milligan Daybed is designed for use as a seating area or a sleeping surface. It accommodates one full-size mattress (not included).
Placement:
- Place the daybed on a level surface to ensure stability.
- Avoid placing the daybed in direct sunlight or near heat sources to prevent fabric fading or wood damage.
Mattress Compatibility:
- This daybed is designed for a standard full-size mattress.
- No box spring is required due to the integrated wood slat support system.
Image: The Baxton Studio Milligan Full Size Daybed, showcasing its design with a mattress and pillow in place.
Maintenance
Regular maintenance will help preserve the appearance and longevity of your daybed.
Fabric Care (100% Polyester):
- Dusting: Regularly vacuum the fabric upholstery using a soft brush attachment to remove dust and debris.
- Spot Cleaning: For spills, blot immediately with a clean, dry cloth. For stubborn stains, use a mild fabric cleaner specifically designed for polyester, testing on an inconspicuous area first. Do not rub vigorously.
- Avoid Harsh Chemicals: Do not use bleach or abrasive cleaners, as these can damage the fabric.
Wood Frame Care:
- Cleaning: Wipe the wood surfaces with a soft, damp cloth. Dry immediately with a clean, dry cloth.
- Avoid Moisture: Do not allow liquids to sit on the wood surface, as this can cause damage.
- Polishing: Periodically use a furniture polish suitable for stained wood to maintain its finish.
General Maintenance:
- Fastener Check: Periodically check all screws and bolts to ensure they remain tight. Re-tighten as needed to maintain structural integrity.
- Weight Limit: Adhere to the maximum weight capacity of 500 pounds.
Troubleshooting
This section addresses common issues you might encounter with your daybed.
| Problem | Possible Cause | Solution |
|---|---|---|
| Daybed feels unstable or wobbly. | Loose fasteners; uneven floor. | Ensure all screws and bolts are securely tightened. Place the daybed on a level surface or use furniture glides to stabilize. |
| Missing parts during assembly. | Packaging error; parts overlooked. | Carefully re-check all packaging materials. If parts are still missing, contact Baxton Studio customer support immediately. |
| Wood slats appear weak or splintered. | Manufacturing defect; improper handling. | Exercise caution when handling slats. If slats are damaged upon arrival or during normal use, contact customer support for replacement options. |
| Fabric upholstery is stained or discolored. | Spills; exposure to direct sunlight. | Refer to the 'Fabric Care' section under Maintenance. For sun damage, reposition the daybed to avoid prolonged direct exposure. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 203-12562-AMZ |
| Brand | Baxton Studio |
| Size | Full |
| Color | Beige |
| Product Dimensions (L x W x H) | 81.3" x 57.1" x 34.6" |
| Item Weight | 81.8 Pounds |
| Material | MDF, Rubberwood, LVL, 100% Polyester Fabric |
| Finish Type | Stained (Wood) |
| Assembly Required | Yes |
| Included Components | One (1) Full Size Daybed |
| Maximum Weight Capacity | 500 pounds |
Image: Dimensional overview of the Baxton Studio Milligan Daybed, indicating overall length, width, and height.
Warranty Information
The Baxton Studio Milligan Full Size Daybed comes with a 30-day limited warranty from the date of purchase. This warranty covers manufacturing defects and material flaws under normal household use. It does not cover damage resulting from improper assembly, misuse, accidents, or normal wear and tear.
For warranty claims or further details, please contact Baxton Studio customer support.
Customer Support
If you have any questions regarding the assembly, operation, maintenance, or warranty of your Baxton Studio Milligan Daybed, please contact our customer support team.
For assistance, please visit the official Baxton Studio website or refer to the contact information provided with your purchase documentation.
Online Support: Visit the Baxton Studio Store on Amazon
