Introduction
The SYLVANIA 4-foot Shop Light with LightSHIELD Technology is designed to provide efficient illumination while offering germ-fighting benefits. This innovative LED fixture features a special coating that, when activated by the light, neutralizes germs, odors, and other organic compounds in the air through natural circulation. Its slim profile and linkable design make it versatile for various applications, and its plug-in installation with an on/off pull chain ensures ease of use. This product is environmentally friendly and safe for use around humans, pets, and plants.
Figure 1: SYLVANIA 4ft Shop Light and its retail packaging.
Safety Information
Please read and understand all instructions before installing or operating this product. Failure to do so may result in electric shock, fire, or other hazards that could cause injury or property damage.
- Always disconnect power before installation, removal, or servicing.
- Do not modify the fixture or its components.
- Ensure the power source voltage matches the fixture's requirements (120 Volts).
- This product is designed for indoor use only.
- Keep away from water or damp locations.
- The LightSHIELD Technology is non-UV and safe for humans, pets, and plants.
Package Contents
Verify that all components are present before beginning installation:
- 1 x SYLVANIA 4ft Shop Light fixture
- Mounting hardware (hooks, chains, screws)
- Instruction Manual
Figure 2: Contents typically found in the product package.
Setup
Mounting the Fixture
The shop light is designed for ceiling mounting. Use the provided mounting hardware to securely attach the fixture to a suitable surface. Ensure the mounting location can support the weight of the fixture and any additional linked units.
- Identify the desired mounting location on the ceiling.
- Install the provided hooks or screws into the ceiling, ensuring they are spaced appropriately for the fixture's length.
- Hang the shop light using the chains or directly attach it to the installed hardware.
Electrical Connection
This shop light features an easy plug-in installation.
- Once mounted, plug the power cord into a standard 120V AC outlet.
- Ensure the outlet is easily accessible and not overloaded.
Figure 3: Example of the shop light installed in a typical workshop environment.
Operating Instructions
Turning On/Off
The shop light is controlled by an integrated on/off pull chain.
- To turn the light ON, gently pull the chain once.
- To turn the light OFF, gently pull the chain again.
LightSHIELD Technology Activation
The LightSHIELD Technology is automatically activated when the LED fixture is switched on. The special coating on the light interacts with the natural air circulation, neutralizing airborne germs, odors, and other organic compounds.
Figure 4: Visual representation of how LightSHIELD Technology works to purify air.
Linking Multiple Fixtures
This shop light is designed to be linkable, allowing you to connect up to 8 fixtures together from a single power outlet. Use the provided linking cable to connect the fixtures end-to-end.
- Ensure all fixtures are unplugged before linking.
- Connect the linking cable from the output end of one fixture to the input end of the next.
- Do not exceed the maximum of 8 linked fixtures.
Maintenance
Regular maintenance will help ensure the longevity and optimal performance of your SYLVANIA Shop Light.
- Cleaning: Disconnect power before cleaning. Use a soft, dry cloth to wipe the exterior of the fixture. Do not use abrasive cleaners or solvents, as they may damage the finish or the LightSHIELD coating.
- Bulb Replacement: This fixture uses integrated LEDs and does not require bulb replacement.
- Inspection: Periodically inspect the power cord and pull chain for any signs of damage. If damage is found, discontinue use and contact customer support.
Troubleshooting
If you encounter issues with your shop light, refer to the following table for common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the outlet. Pull chain not activated. Faulty fixture. | Check the circuit breaker. Ensure the outlet is working by plugging in another device. Pull the chain firmly to ensure it clicks. Contact customer support if the issue persists. |
| Light flickers. | Loose connection. Incompatible dimmer (if attempted). | Ensure the power plug is fully inserted. Note: This fixture is non-dimmable. Do not connect to a dimmer switch. |
| Germicidal feature not perceived. | LightSHIELD works subtly. Non-UV technology. | The germicidal action is a continuous, subtle process, not immediately visible. It is not a UV product. Allow time for the technology to work. |
| Cannot link more than 8 fixtures. | Exceeded maximum linkable units. | The fixture supports linking up to 8 units only. Do not attempt to link more. |
Specifications
| Attribute | Value |
|---|---|
| Brand | LEDVANCE (SYLVANIA) |
| Model Number | 75751 |
| Light Type | LED |
| Wattage | 40 Watts |
| Brightness | 4000 Lumens |
| Color Temperature | 4000K (Cool White) |
| Voltage | 120 Volts |
| Dimensions (L x W x H) | 47.72 x 4.25 x 1.22 inches |
| Item Weight | 1.94 pounds |
| Special Features | Energy Efficient, Environmentally Friendly, Continuous Disinfection, Air Purification, Linkable |
| Control Method | Pull chain control |
| Rated Life | 50,000 hours |
Figure 5: Product dimensions for planning installation space.
Warranty and Support
This SYLVANIA 4ft Shop Light is backed by a standard 5-year warranty, ensuring quality and reliability. For warranty claims or technical assistance, please retain your proof of purchase.
For further support or to explore other SYLVANIA products, please visit the official LEDVANCE store:
