Monster Multicolor Bluetooth Car Interior LED Accent Lights User Manual

Introduction

Thank you for choosing the Monster Multicolor Bluetooth Car Interior LED Accent Lights. This product is designed to enhance your vehicle's interior with customizable lighting effects, controlled conveniently via a smartphone application. This manual provides essential information for proper installation, operation, and maintenance to ensure optimal performance and longevity of your LED accent lights.

Safety Information

• Ensure your vehicle's engine is off and the parking brake is engaged before installation.
• Do not obstruct any vehicle controls, airbags, or driver's view with the LED strips or wiring.
• Avoid installing the lights in areas exposed to extreme heat or moisture, as the product is not water-resistant.
• Use only the provided 12V DC adapter. Using an incompatible power source may damage the product or your vehicle.
• Keep wiring neatly tucked away to prevent interference with pedals or other moving parts.

Package Contents

Verify that all items are present in your package:

• 4 x Monster Multicolor Bluetooth Car Interior LED Accent Light Strips (10.5 inches each)
• 1 x 12V Car DC Adapter
• User Manual (this document)

Image: The product packaging and the four LED light strips with the control unit and power adapter.

Image: The retail box for the Monster Bluetooth Car Interior LED Accent Lights, showing product features and app download information.

Image: A close-up view of the four individual LED light strips, highlighting their design and adhesive backing.

Setup

1. Planning Installation Location

Before peeling the adhesive, plan where you want to place each of the four LED strips. Common locations include under the dashboard, beneath seats, or along the center console. Ensure the chosen surfaces are clean, dry, and smooth for optimal adhesion. Consider cable routing to avoid interference with vehicle operation.

2. Attaching the LED Strips

1. Clean the desired installation surface thoroughly with an alcohol wipe and allow it to dry completely.
2. Peel off the protective backing from the adhesive strip on the back of each LED light strip.
3. Carefully press the LED strip firmly onto the chosen surface for at least 30 seconds to ensure good adhesion.
4. Repeat for all four LED strips.

Image: Green LED accent lights installed discreetly under the dashboard on the passenger side of a car, illuminating the footwell.

3. Connecting to Power

1. Connect the cables from the four LED strips to the main control unit.
2. Plug the 12V Car DC Adapter into the control unit.
3. Insert the 12V Car DC Adapter into your vehicle's DC power port (cigarette lighter socket).
4. Ensure all connections are secure.

4. App Download and Connection

To unlock the full customization features, download the Monster Smart App:

• Scan the QR code provided in the product packaging or search for "Monster Smart App" on the Apple App Store (for iOS devices) or Google Play Store (for Android devices).
• Install the app on your smartphone.
• Ensure your phone's Bluetooth is enabled.
• Open the Monster Smart App and follow the on-screen instructions to pair with your LED accent lights.

Image: A smartphone screen showing the Monster Smart App interface with a color wheel, brightness, and saturation controls, alongside logos for downloading the app from the Apple App Store and Google Play.

Operating Instructions

Using the Monster Smart App

Once paired, the Monster Smart App provides comprehensive control over your LED accent lights:

• Color Selection: Choose from a wide spectrum of colors using the color wheel.
• Brightness Adjustment: Adjust the intensity of the lights to suit your preference.
• Saturation Control: Modify the vibrancy of the chosen color.
• Modes and Scenes: Select from various pre-set lighting modes (e.g., flash, fade) or create custom scenes.
• Timer and Schedule: Set timers for the lights to turn on/off or schedule specific lighting effects.

Image: A car interior illuminated with red LED accent lights, with a hand holding a smartphone showing the Monster Smart App interface for color and brightness control.

Image: A car interior at night, viewed from the driver's perspective, with blue LED accent lights illuminating the footwells and dashboard area, creating a dynamic atmosphere.

Using the Built-in Control Button

The control unit features a built-in button for basic functions:

• Single Press: Cycles through pre-set colors or modes.
• Long Press: Turns the lights on or off.

Image: A close-up of the black control unit with a single button, integrated into the wiring of the LED accent lights, labeled with the Monster logo.

Maintenance

• Cleaning: Gently wipe the LED strips with a dry, soft cloth to remove dust. Do not use liquid cleaners directly on the lights.
• Connection Check: Periodically inspect all cable connections to ensure they are secure and free from damage.
• Adhesion: If an LED strip begins to detach, re-secure it with additional automotive-grade double-sided adhesive tape.

Troubleshooting

Specifications

• Brand: XTREME DIGITAL LIFESTYLE ACCESSORIES
• Model Number: MLB7-1089-RGB
• Color: Multicolor
• Form Factor: Strip
• Auto Part Position: Front (Universal Fit)
• Water Resistance Level: Not Water Resistant
• Remote Control Included?: No (App controlled)
• Number of Pieces: 4 LED Light Strips
• Power Source: 12V Car DC Adapter
• Item Weight: 10.2 ounces
• Package Dimensions: 13.15 x 5.75 x 1.61 inches
• UPC: 805106893682

Warranty and Support

This product is subject to the retailer's return policy, typically offering a 30-day refund/replacement period from the date of purchase. For technical support or warranty inquiries beyond this period, please contact XTREME DIGITAL LIFESTYLE ACCESSORIES customer service through their official channels or the retailer where the product was purchased.