iTOMA CKS208 Alarm Clock Radio User Manual

1. Introduction and Overview

The iTOMA CKS208 is a versatile alarm clock radio designed to enhance your daily routine with its advanced features and user-friendly interface. It combines traditional alarm clock functionalities with modern connectivity options, including Bluetooth audio streaming and a dedicated mobile application for simplified control. This manual provides detailed instructions to help you set up, operate, and maintain your iTOMA CKS208.

Image: The iTOMA CKS208 alarm clock radio, showcasing its orange LED display and top controls, alongside a smartphone demonstrating the companion app interface.

2. Key Features

• LED Display with Dimmer: Easy-to-read 3.6-inch orange LED clock display with 4-level brightness control and automatic dimmer.
• App Control: Control and configure settings using the iTOMA Connect (Smart Time-iTOMA) application for iOS and Android devices.
• Dual Alarm: Set two independent alarms with options for radio or buzzer, increasing alarm volume, and 4 alarm modes (daily, single day, weekdays, weekends).
• FM Radio with Sleep Timer: Easy tuning for FM channels, storage for up to 20 stations, and a programmable sleep timer (10-90 minutes).
• Bluetooth Connectivity: Stream audio wirelessly from your smartphone or other Bluetooth-enabled devices.
• USB Charging Port: Convenient 1.5A 5V USB port to charge your smart devices.
• Night Light: 2-level orange night light for ambient illumination.
• Backup Battery: Pre-installed CR2032 button cell battery for time and settings backup during power outages.

Image: Visual representation of the iTOMA CKS208's main features, including Dual Alarm Snooze, FM Radio, Dimmer, Auto Time Setting, Bluetooth, and Night Light.

3. Setup

3.1 Power Connection

Connect the provided power adapter to the DC IN jack on the back of the alarm clock and then plug it into a standard wall outlet. The unit will power on and the display will light up.

3.2 Backup Battery

The iTOMA CKS208 comes with a pre-installed CR2032 button cell battery. This battery serves as a backup for time and alarm settings in case of a power interruption. It does not power the clock's main functions.

3.3 Initial Time Setting

Upon first power-up, the clock may display a default time. You can set the time manually using the buttons on the unit or more conveniently via the iTOMA Connect app (see Section 4.4).

4. Operating Instructions

4.1 Time and Date Setting

To set the time manually:

1. Press and hold the CLOCK SET button. The hour digits will flash.
2. Use the TUNE+ or TUNE- buttons to adjust the hour.
3. Press CLOCK SET again to confirm the hour and move to minutes.
4. Use the TUNE+ or TUNE- buttons to adjust the minutes.
5. Press CLOCK SET to save and exit.

The clock supports 12/24 hour format. You can switch between formats by pressing the CLOCK SET button briefly when the time is displayed.

4.2 Alarm Functions

The CKS208 features dual alarms (AL1 and AL2). Each alarm can be set independently.

1. Press and hold the AL1 or AL2 button. The alarm time will flash.
2. Use TUNE+ or TUNE- to set the desired alarm hour.
3. Press AL1 or AL2 again to confirm hour and set minutes.
4. Use TUNE+ or TUNE- to set the desired alarm minutes.
5. Press AL1 or AL2 again to select alarm source (FM radio or Buzzer).
6. Press AL1 or AL2 again to select alarm mode (Everyday, Single Day, Weekdays, Weekends).
7. Press AL1 or AL2 to save and activate the alarm. An alarm icon will appear on the display.

When an alarm sounds, press the SNOOZE button for a 9-minute snooze. To turn off the alarm, press the corresponding AL1 or AL2 button.

Image: The iTOMA CKS208 alarm clock radio showing two distinct alarm settings, one for FM radio wake-up and another for buzzer wake-up.

4.3 FM Radio

To operate the FM radio:

1. Press the FM button to turn on the radio.
2. Use TUNE+ or TUNE- to manually tune to a station.
3. Press and hold TUNE+ or TUNE- to auto-scan for the next available station.
4. To save a station, press and hold FM STO/BT PAIR. Use TUNE+ or TUNE- to select a preset number (up to 20). Press FM STO/BT PAIR again to save.
5. To recall a saved station, briefly press FM STO/BT PAIR repeatedly.

The radio features a sleep timer (10-90 minutes). Press the SLEEP/TIME ZONE button repeatedly to cycle through sleep timer options. The radio will automatically turn off after the selected duration.

Image: The iTOMA CKS208 alarm clock radio displaying an FM radio frequency, indicating its radio functionality.

4.4 Bluetooth Connectivity

To pair your device via Bluetooth:

1. Press the BT button on the unit. The Bluetooth indicator on the display will flash, indicating pairing mode.
2. On your smartphone or Bluetooth-enabled device, enable Bluetooth and search for