Important Safety Information
Read all instructions carefully before beginning installation. Failure to follow these instructions could result in electric shock, fire, or personal injury. This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- Always disconnect power at the main circuit breaker before installation or servicing.
- Ensure all electrical connections are made in accordance with local codes and ordinances.
- Mounting structure must be capable of supporting the fan's weight (approximately 19.4 lbs).
- Do not operate the fan with damaged blades or housing.
- This fan is designed for indoor use only.
Package Contents
Verify that all components are present before beginning installation.
- Ceiling Fan Motor Housing
- 5 Reversible Fan Blades
- Blade Arms with Captive Screws
- Light Kit Assembly (4 Frosted Polypropylene Shades)
- 4 Dimmable ENERGY STAR LED Light Bulbs (8.5W, 3000K, 90CRI)
- Downrod and Canopy
- Mounting Hardware
- Installation Sheet
Image: Cover of the AirPro Ceiling Fan Installation Manual, showing an illustration of the fan.
Setup and Installation
This section provides an overview of the installation process. Refer to the included detailed installation sheet for complete step-by-step instructions.
Mounting Options
The fan can be installed on either a flat ceiling or a sloped ceiling. Ensure the electrical box is securely mounted and rated for ceiling fan support.
Blade Assembly
The fan features 5 reversible blades, offering a choice between a smooth black finish and a rustic charcoal finish. Attach the blades to the blade arms using the provided captive screws, which simplify the assembly process.
Image: A close-up view of a fan blade, showing Side A with a black finish and Side B with a rustic charcoal finish, highlighting the reversible design.
Light Kit Installation
The light kit includes four frosted polypropylene shades and four LED bulbs. Install the light kit to the fan motor housing according to the detailed instructions in the manual. Ensure bulbs are securely seated.
Image: A collage of four close-up images showing different angles of the fan's motor housing, light kit, and pull chains, illustrating component details.
Image: A collage of four detailed images showing the fan blades in both black and rustic charcoal finishes, along with close-ups of the light kit and motor housing.
Operating Instructions
Fan Speed Control
The fan speed is controlled by a pull chain. Pull the chain repeatedly to cycle through the three available fan speed settings (High, Medium, Low) and Off.
Light Operation
The integrated light kit is operated by a separate pull chain. Pull the chain to turn the lights On or Off. The included LED bulbs are dimmable; however, an accessory wall or remote control (sold separately) is required for dimming functionality.
Reversible Blade Function
To change the direction of airflow for seasonal comfort, locate the reverse switch on the fan motor housing. In warm weather, set the switch to circulate air downward, creating a cooling effect. In cool weather, set the switch to circulate air upward, redistributing warm air without creating a draft.
Maintenance
Cleaning
To clean the fan, wipe with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components. Ensure power is disconnected before cleaning.
Bulb Replacement
The fan uses 8.5-Watt LED bulbs. When replacing bulbs, ensure the power is off and allow bulbs to cool. Use only LED bulbs of the same wattage and base type to maintain optimal performance and energy efficiency.
Troubleshooting
If you experience issues with your ceiling fan, consult the following common troubleshooting steps:
- Fan Does Not Start: Check circuit breaker and wall switch. Ensure all wire connections are secure.
- Lights Do Not Work: Verify bulbs are correctly installed and not loose. Check the light pull chain. Ensure power is supplied to the light kit.
- Excessive Wobbling: Ensure all blade screws are tightened. Check that the fan is securely mounted to the ceiling junction box. Balance kit may be required (not included).
- Noisy Operation: Confirm all screws are tight. Check for any loose parts or obstructions.
If problems persist after attempting these steps, contact customer support.
Specifications
| Feature | Detail |
|---|---|
| Model Number | P250081-31M-WB |
| Brand | Progress Lighting |
| Product Dimensions | 52"D x 52"W x 18.7"H |
| Item Weight | 19.4 Pounds |
| Color | Matte Black / Frosted |
| Electric Fan Design | Ceiling Fan |
| Power Source | Corded Electric |
| Voltage | 120 Volts |
| Switch Type | Pull Chain |
| Control Method | Remote (accessory, sold separately) |
| Number of Blades | 5 |
| Blade Finish Options | Black, Rustic Charcoal (Reversible) |
| Light Kit | 4 Frosted Polypropylene Shades |
| Bulb Type | LED (4 x 8.5W, 3000K, 90CRI) |
| Air Flow Capacity | 3330 Cubic Feet Per Minute |
| Efficiency | ENERGY STAR rated, maximum efficiency |
| Indoor/Outdoor Usage | Indoor |
| Certifications | UL Listed, Title 24 JA8 rated |
Image: Diagram illustrating the dimensions of the ceiling fan, showing a 52-inch diameter and 18.7-inch height.
Image: A detailed product specification sheet for the AirPro Builder Fan, model P250081-31M-WB, listing performance data, dimensions, and certifications.
Warranty Information
This Progress Lighting AirPro ceiling fan is covered by a 30-year Limited Warranty. For specific terms and conditions, please refer to the warranty documentation included with your product or visit the official Progress Lighting website.
Customer Support
For technical assistance, replacement parts, or warranty claims, please contact Progress Lighting customer support. Refer to the contact information provided in your product packaging or on the official Progress Lighting website.
