1. Important Safety Information
Please read this entire manual carefully before installing, operating, or servicing this electric fireplace insert. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury. Keep this manual for future reference.
- Electrical Safety: Always connect the unit to a properly grounded outlet. Do not overload electrical circuits. Do not use with extension cords unless absolutely necessary and ensure they are rated for the appliance's power.
- Placement: Place the fireplace on a firm, level surface. Maintain adequate clearance from combustible materials (curtains, furniture, bedding) as specified in the setup section. Do not block air vents.
- Heat Warning: The heater outlet can become very hot. Keep children and pets away from the hot surfaces. Do not touch the heater outlet during operation.
- Moisture: Do not use this fireplace in wet or damp locations, such as bathrooms or laundry areas.
- Maintenance: Always unplug the unit before cleaning or performing any maintenance.
- Supervision: Never leave the operating fireplace unattended.
2. Product Overview
The Klarstein Electric Fireplace Insert provides a realistic LED flame effect and a powerful 1800W heating function, designed to enhance the ambiance and warmth of your living space. It features convenient remote control operation, a programmable timer, and an adjustable thermostat.
Key Features:
- Realistic LED flame illusion with adjustable brightness.
- Powerful 1800W heating element.
- Remote control for convenient operation.
- Programmable weekly timer for heating schedules.
- Adjustable thermostat with a temperature range of 7°C to 30°C.
- Open window detection for energy efficiency.
- Modern metal casing with decorative log set.
Product Components:
- Electric Fireplace Insert Unit
- Remote Control
- User Manual (Multilingual)
3. Setup
Unpacking:
- Carefully remove the fireplace insert from its packaging.
- Retain the packaging for future storage or transport.
- Check for any damage during transit. If damage is found, do not operate the unit and contact customer support.
Placement:
- Place the fireplace insert on a hard, level surface.
- Ensure there is at least 1 meter (3 feet) of clearance from combustible materials such as curtains, furniture, bedding, paper, or other flammable items.
- Do not place the unit directly below an electrical outlet.
- Ensure the air intake and exhaust vents are not obstructed.
- This unit is designed for indoor use only.
Power Connection:
Plug the power cord into a 220-240 V~, 50/60 Hz grounded electrical outlet. Ensure the outlet is easily accessible.
4. Operating Instructions
The fireplace insert can be operated using the manual controls on the unit or the included remote control.
Manual Controls:
Refer to the diagram on the unit for specific button functions. Typically, these include a main power switch, flame effect control, and heater control.
Remote Control Functions:
- Power Button: Turns the unit ON or OFF.
- Heater Button: Activates or deactivates the heating function.
- Flame Button: Adjusts the brightness of the LED flame effect (5 levels).
- Timer Button: Sets the programmable timer for automatic switch-on and switch-off times.
- Temperature Buttons (+/-): Adjusts the desired room temperature between 7°C and 30°C.
Flame Effect:
Press the 'Flame' button on the remote control to cycle through the 5 brightness levels of the LED flame effect. The flame effect can be used independently of the heating function.
Heating Function:
Press the 'Heater' button to activate the heating. Use the '+' and '-' buttons to set your desired temperature. The unit will automatically maintain the set temperature. The fireplace also features an 'Open Window Detection' function, which will temporarily pause heating if a sudden drop in room temperature is detected, helping to save energy.
Programmable Timer:
The weekly timer allows you to program specific heating schedules for each day of the week. Consult the detailed instructions in the full manual for setting up the weekly timer. The unit can also be controlled via the Klarstein application for enhanced scheduling and control options.
5. Maintenance
Regular maintenance ensures the longevity and safe operation of your electric fireplace insert.
Cleaning:
- Always unplug the unit before cleaning.
- Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Gently vacuum or wipe the air intake and exhaust vents to remove dust and debris. Ensure vents are clear for proper airflow.
- Do not immerse the unit in water.
Storage:
When not in use for extended periods, store the fireplace insert in a cool, dry place, preferably in its original packaging, away from direct sunlight and moisture.
6. Troubleshooting
If you encounter issues with your fireplace insert, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on. | No power, main switch off, remote control batteries dead. | Check power cord connection, ensure main power switch is ON, replace remote control batteries. Check circuit breaker. |
| No heat output. | Heater function off, thermostat set too low, open window detection activated. | Activate heater function, increase thermostat setting, close windows/doors. |
| Flame effect not working. | Flame effect off, LED malfunction. | Press the 'Flame' button on the remote or unit. If still not working, contact support. |
| Unit makes unusual noise. | Fan obstruction, internal component issue. | Ensure vents are clear. If noise persists, discontinue use and contact support. |
If the problem persists after attempting these solutions, please contact Klarstein customer support.
7. Specifications
| Specification | Detail |
|---|---|
| Brand | KLARSTEIN |
| Model Number | FP16-Kamini FXL 2G W |
| Color | White |
| Dimensions (L x H x D) | 52 x 31 x 22 cm |
| Weight | 6 kg |
| Material | Metal |
| Power Output | 1800 Watts |
| Power Supply | 220-240 V~ | 50/60 Hz |
| Temperature Range | 7°C - 30°C |
| Special Features | Flame Effect, Remote Control, Programmable Timer, Open Window Detection |
8. Warranty and Support
Warranty:
This Klarstein product comes with a manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official Klarstein website for detailed warranty terms and conditions. Keep your proof of purchase for warranty claims.
Customer Support:
For technical assistance, spare parts, or any questions regarding your Klarstein Electric Fireplace Insert, please contact Klarstein customer service. Contact details can typically be found on the official Klarstein website or in the product packaging.
Online Resources: For additional information, FAQs, and product registration, please visit the official Klarstein website.