1. Introduction
Thank you for choosing the TRESKO 1500W Ceiling Infrared Heater. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new heater. Please read all instructions carefully before use and retain this manual for future reference.
Figure 1: TRESKO 1500W Ceiling Infrared Heater, highlighting its modern design, quick heating, 360-degree heat, three heat settings, 1.55m cable, powder-coated steel, and included carabiner hooks.
2. Safety Instructions
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury.
- Read all instructions before using this heater.
- Do not use the heater in areas where gasoline, paint, or flammable liquids are stored.
- Ensure the power supply voltage matches the rating label on the heater.
- Do not touch hot surfaces. Use handles or knobs.
- Unplug from the outlet when not in use or before cleaning.
- Do not operate any heater with a damaged cord or plug, or after the heater malfunctions or has been dropped or damaged in any manner.
- Keep combustible materials such as furniture, pillows, bedding, papers, clothes, and curtains at least 1 meter (3 feet) from the front of the heater and away from the sides and rear.
- This heater is rated IP34 for indoor and outdoor use, meaning it is protected against splashing water. However, do not immerse it in water or expose it to heavy rain.
- Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the heater.
- To prevent a possible fire, do not block air intakes or exhaust in any manner.
- Use this heater only as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons.
Figure 2: The heater is weather-resistant (IP34 rated) for both indoor and outdoor environments, offering 500W, 1000W, and 1500W heat settings.
3. Package Contents
Please check the contents of the package upon unpacking:
- TRESKO 1500W Ceiling Infrared Heater
- Remote Control
- Stainless Steel Chain for hanging
- Carabiner Hooks (2x)
- User Manual
4. Setup and Installation
The TRESKO Ceiling Infrared Heater is designed for easy ceiling mounting. Ensure the mounting location is structurally sound and can support the weight of the heater (approximately 7 kg).
4.1 Choosing a Location
- Select a location that allows for a minimum clearance of 30 cm (12 inches) from the top of the heater to the ceiling and at least 1 meter (3 feet) from any combustible materials.
- Ensure the location is protected from direct heavy rain if used outdoors, despite its IP34 rating.
- The power outlet should be easily accessible and within reach of the 1.55m power cable. An extension cord may be used if it is rated for the heater's wattage (1500W).
4.2 Mounting the Heater
- Securely attach the stainless steel chain to the designated mounting points on the top of the heater.
- Using the carabiner hooks, hang the heater from a suitable, sturdy ceiling fixture or beam. Ensure the fixture can safely bear the heater's weight.
- Adjust the chain length to achieve the desired height, maintaining the minimum clearance requirements.
- Plug the heater into a grounded 220V electrical outlet.
Figure 3: The heater features robust and safe construction with environmentally friendly carbon tubes and easy installation using the stainless steel chain.
5. Operating Instructions
The TRESKO Ceiling Infrared Heater can be operated using the integrated power button or the included remote control.
5.1 Powering On/Off
- Manual: Press the power button located on the heater's body to turn it on or off.
- Remote Control: Press the power button (U) on the remote control to turn the heater on or off.
5.2 Adjusting Heat Settings
The heater offers three heat settings: 500W, 1000W, and 1500W.
- Remote Control: Use the dedicated buttons (e.g., 500W, 1000W, 1500W or similar symbols) on the remote control to select the desired heat level. The heater will indicate the current setting, often via an LED light.
- The heater warms up within seconds due to its Instant-Heat technology and carbon tube.
5.3 Remote Control Battery
The remote control requires batteries (not always included). Refer to the remote control's battery compartment for the correct battery type and installation instructions.
6. Maintenance
Regular maintenance ensures the longevity and efficient operation of your heater.
6.1 Cleaning
- Always unplug the heater from the power outlet and allow it to cool completely before cleaning.
- Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Do not immerse the heater in water or spray water directly onto it.
- Clean the stainless steel protection grille gently to remove any dust or debris.
6.2 Storage
If storing the heater for an extended period, ensure it is clean and dry. Store it in a cool, dry place, preferably in its original packaging.
7. Troubleshooting
If you encounter issues with your TRESKO heater, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | No power supply. Remote control batteries are dead. | Check if the heater is properly plugged into a working outlet. Replace remote control batteries. |
| Heater produces insufficient heat. | Low heat setting selected. Room/area is too large for the heater. | Increase the heat setting using the remote control. Ensure the heater is used in an appropriately sized area. |
| Remote control not working. | Batteries are dead or incorrectly inserted. Obstruction between remote and heater. | Replace batteries, ensuring correct polarity. Ensure a clear line of sight to the heater's receiver. |
| Unusual smell or noise. | New product smell (temporary). Internal malfunction. | A slight odor is normal for new heaters and will dissipate. If persistent or strong, unplug and contact support. Unplug immediately and contact customer support. |
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | TDCHSL-004_086 |
| Brand | TRESKO |
| Power Output | 1500 W |
| Voltage | 220 V |
| Heat Settings | 3 (500W, 1000W, 1500W) |
| Dimensions (Product) | 43 cm (Diameter) x 30 cm (Height) |
| Weight | 7 kg |
| Cable Length | 1.55 m |
| Protection Class | IP34 (Splash-proof) |
| Heating Method | Infrared (Carbon Tube) |
| Mounting Type | Ceiling Mount |
| Special Features | Remote Control, Energy Efficient, Robust Aluminum Housing, Stainless Steel Protection Grille |
Figure 4: Detailed measurements of the heater (43 cm diameter, 30 cm height) and key features like the 1.55m cable, LED indicator, and remote control functionality.
9. Warranty and Support
For warranty information and customer support, please refer to the purchase documentation or contact your retailer. Keep your proof of purchase for any warranty claims.
Manufacturer: DWD-Company GmbH & Co. KG