1. Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your Poagavgs Pro-Parts Drive Friction Disc (Models 03248300, 03240700). This replacement part is designed for use in various Ariens, Murray, and John Deere snow blower models. Please read this manual thoroughly before attempting any installation or service to ensure safety and optimal performance of your equipment.
2. Safety Information
Always observe the following safety precautions when working with snow blowers and replacement parts:
- Disconnect Power: Before beginning any maintenance or installation, ensure the snow blower's engine is off, the spark plug wire is disconnected, and the key is removed to prevent accidental starting.
- Read Snow Blower Manual: Refer to your snow blower's original owner's manual for specific safety instructions and procedures related to your model.
- Wear Protective Gear: Always wear appropriate personal protective equipment, including safety glasses and gloves, when handling parts and tools.
- Secure Equipment: Ensure the snow blower is on a stable, level surface and cannot roll or tip during service.
- Professional Installation: If you are unsure about any step, consult a qualified service technician.
- Use Correct Tools: Use only the recommended tools for installation and removal to prevent damage to the part or equipment.
3. Product Overview
The Poagavgs Pro-Parts Drive Friction Disc is a critical component in the drive system of compatible snow blowers. It facilitates the transfer of power from the engine to the wheels, allowing the snow blower to move forward or backward. This replacement disc is engineered to meet or exceed the specifications of original equipment parts.
Key Features:
- New Replacement Drive Friction Disc.
- Compatible with Murray, Ariens, and John Deere Snow Blowers.
- Replaces part numbers: 03248300, 03240700, 22013, 022013, 240-068, AM-123355, M110594, 1501435MA.
- Specifications: 4-3/8" Outer Diameter (OD), 2-1/4" Center Hole.
Product Images:

Figure 3.1: Top view of the Poagavgs Pro-Parts Drive Friction Disc. This image displays the circular metal plate with three evenly spaced mounting holes and a larger central hole, all encased by a black rubber outer ring. This view highlights the overall shape and key attachment points of the disc.

Figure 3.2: Side profile view of the Poagavgs Pro-Parts Drive Friction Disc. This image illustrates the disc's thickness, clearly showing the layered construction of the metal core and the surrounding black rubber material. This perspective is useful for understanding the disc's physical dimensions and how it interacts with other components.
4. Installation
Replacing the drive friction disc requires mechanical aptitude and adherence to safety protocols. Always refer to your specific snow blower's service manual for detailed, model-specific instructions. The following is a general guide:
- Prepare the Snow Blower:
- Ensure the engine is off, cool, and the spark plug wire is disconnected.
- Remove the ignition key.
- Place the snow blower on a stable, level surface.
- Access the Drive System:
- Depending on your snow blower model, you may need to remove covers, shields, or other components to gain access to the drive system and the friction disc assembly.
- Carefully observe and note the position of all removed parts for reassembly.
- Remove the Old Friction Disc:
- Locate the friction disc within the drive plate assembly.
- Loosen and remove any bolts, nuts, or retaining clips securing the old friction disc.
- Carefully extract the worn or damaged disc. Note its orientation.
- Inspect Surrounding Components:
- While the drive system is open, inspect the drive plate, shaft, bearings, and other related components for wear or damage. Replace any worn parts as necessary.
- Clean any debris or rubber residue from the drive plate.
- Install the New Friction Disc:
- Position the new Poagavgs Pro-Parts Drive Friction Disc (03248300 / 03240700) in the same orientation as the old disc.
- Secure it with the appropriate bolts, nuts, or retaining clips. Ensure all fasteners are tightened to the manufacturer's recommended torque specifications (refer to your snow blower manual).
- Reassemble and Test:
- Reattach all covers, shields, and other components removed earlier.
- Reconnect the spark plug wire.
- Start the snow blower and test the drive system in a safe, open area to ensure proper engagement and movement.
5. Operation (Friction Disc Function)
Once installed, the drive friction disc operates as part of your snow blower's transmission system. When the drive lever is engaged, the friction disc presses against a drive plate, transferring rotational power from the engine to the wheels. The position of the friction disc on the drive plate determines the speed and direction of the snow blower's movement.
A properly functioning friction disc ensures smooth and consistent power transfer, allowing your snow blower to propel itself effectively through snow. If the snow blower experiences difficulty moving or inconsistent speed, the friction disc may be worn or damaged.
6. Maintenance
Regular inspection and timely replacement of the friction disc are crucial for maintaining the performance and longevity of your snow blower's drive system.
- Periodic Inspection: Inspect the friction disc annually, or more frequently if the snow blower is used heavily. Look for signs of wear, cracking, hardening, or missing rubber material.
- Cleaning: Keep the friction disc and the drive plate free from dirt, debris, and oil. Contaminants can reduce friction and cause slippage.
- Replacement: Replace the friction disc when it shows significant signs of wear or if the snow blower's drive system is no longer engaging effectively. A worn disc can lead to loss of drive power and inefficient operation.
7. Troubleshooting
If your snow blower is experiencing drive issues after installing or inspecting the friction disc, consider the following:
| Symptom | Possible Cause | Solution |
|---|---|---|
| Snow blower does not move or moves slowly. | Worn or damaged friction disc. Drive belt loose or broken. Drive plate dirty or oily. Linkage adjustment incorrect. | Inspect and replace friction disc if worn. Check and adjust/replace drive belt. Clean drive plate thoroughly. Refer to snow blower manual for linkage adjustment. |
| Grinding or unusual noises from drive system. | Incorrectly installed friction disc. Damaged bearings or other drive components. Debris in drive system. | Re-check friction disc installation. Inspect bearings and other components for wear. Clean out any foreign material. |
| Friction disc wears out quickly. | Improper installation. Excessive pressure on drive system. Misaligned components. | Ensure correct installation and alignment. Avoid forcing snow blower through heavy snow. Inspect drive plate and shaft for alignment issues. |
If troubleshooting steps do not resolve the issue, it is recommended to consult a certified service technician.
8. Specifications
- Brand: Poagavgs
- Part Numbers: 03248300, 03240700
- Replaces: 22013, 022013, 240-068, AM-123355, M110594, 1501435MA
- Outer Diameter (OD): 4-3/8 inches
- Center Hole Diameter: 2-1/4 inches
- Material: Metal core with rubber outer ring
- Compatibility: Various Ariens, Murray, John Deere Snow Blower models
- Item Weight: 0.28 Kilograms
- UPC: 700490690995
9. Warranty and Support
For specific warranty information regarding your Poagavgs Pro-Parts Drive Friction Disc, please refer to the documentation provided at the time of purchase or contact the seller directly. Warranty terms typically cover manufacturing defects for a specified period.
If you require technical assistance or have questions not covered in this manual, please contact the Poagavgs customer support or your authorized dealer. When contacting support, please have your product model number (03248300 / 03240700) and purchase details readily available.