1. Introduction
This manual provides essential information for the proper setup, operation, and maintenance of your Klipsch Reference R-800F Floorstanding Speaker. The R-800F speaker is designed to deliver high-fidelity audio for home theater and music listening environments, featuring updated Tractrix Horn technology for clear, natural sound reproduction and refined Dolby Atmos connections for immersive surround sound.
Image 1.1: Front angled view of the Klipsch Reference R-800F Floorstanding Speaker.
Key Features:
- 90° x 90° Tractrix Horn: Engineered for optimal high-frequency directivity and an accurate sound stage.
- Linear Travel Suspension (LTS) Aluminum Tweeter with Kapton Suspension: Minimizes distortion for detailed audio performance.
- Spun-Copper Thermoformed Crystalline Polymer (TCP) Woofers: Provides smooth response, improved accuracy, and transparency.
- Rear-Firing Tractrix Port: Ensures efficient airflow with minimal distortion, even at low frequencies.
- MDF Cabinet with Scratch-Resistant, Textured Wood Grain Vinyl: Offers durability and aesthetic integration.
- Refined Dolby Atmos Connections: Simplifies upgrading to immersive surround sound.
2. Setup and Placement
Proper placement and connection are crucial for achieving optimal sound performance from your R-800F speakers. Consider the acoustics of your room and the intended listening position.
2.1 Speaker Placement
For stereo listening, place the speakers equidistant from your primary listening position and spaced apart to create an equilateral triangle. For home theater setups, refer to your receiver's manual for recommended speaker angles and distances. Ensure speakers are placed on a stable, level surface.
2.2 Connecting Your Speakers
The R-800F features standard binding posts for connecting to your amplifier or receiver. Use high-quality speaker wire for the best audio transmission. Ensure correct polarity (positive to positive, negative to negative) for all connections.
Image 2.1: Rear view of the R-800F speaker, highlighting the input terminals and rear Tractrix port.
2.3 Dolby Atmos Connections
The R-800F speakers include refined connections for integrating Dolby Atmos modules. These connections are designed to be simple and discreet, allowing for easy upgrade to an immersive surround sound experience. Connect your Dolby Atmos enabled receiver's height channel outputs to the dedicated Atmos inputs on the back of the R-800F speaker, typically located near the top rear of the cabinet.
Video 2.1: An overview of the Klipsch Reference Series speakers, demonstrating their design and application in a home theater setup. This video illustrates the aesthetic and functional integration of the speakers.
3. Operation
Once properly connected, operating your Klipsch R-800F speakers is straightforward. Ensure your audio source (e.g., receiver, amplifier) is powered on and configured correctly.
3.1 Powering On and Source Selection
Turn on your amplifier or receiver. Select the appropriate input source for your audio content. Adjust the volume to a comfortable listening level. The R-800F speakers are passive and do not require separate power; they draw power directly from your amplifier.
3.2 Compatible Devices
These speakers are compatible with a wide range of audio devices, including home theater receivers, stereo amplifiers, gaming consoles, televisions, and other audio sources that provide amplified output. For optimal performance, ensure your amplifier meets the recommended power specifications for the R-800F.
4. Maintenance
To ensure the longevity and optimal performance of your Klipsch R-800F speakers, follow these maintenance guidelines.
4.1 Cleaning
Dust the speaker cabinets regularly with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or strong detergents, as these can damage the finish. For the spun-copper woofers, use a very soft, dry brush if necessary, and avoid touching the cone directly to prevent damage.
4.2 Grille Care
The R-800F speakers feature low-profile magnetic grilles. These can be removed for cleaning or for a different aesthetic preference. Handle grilles gently to avoid bending or tearing the fabric. Clean them with a soft brush or a lint roller.
4.3 Environmental Considerations
Avoid exposing the speakers to extreme temperatures, high humidity, or direct sunlight for extended periods. These conditions can affect the cabinet finish and internal components. Ensure adequate ventilation around the speakers.
5. Troubleshooting
If you encounter issues with your Klipsch R-800F speakers, consult the following common troubleshooting steps.
5.1 No Sound
- Check Connections: Ensure all speaker wires are securely connected to both the speaker and the amplifier/receiver, with correct polarity.
- Verify Amplifier/Receiver: Confirm your amplifier/receiver is powered on, the correct input source is selected, and the volume is not muted or set too low.
- Test with Another Source: Try connecting a different audio source to your amplifier/receiver to rule out issues with the original source.
5.2 Distorted Sound
- Reduce Volume: If distortion occurs at high volumes, your amplifier may be clipping. Reduce the volume to prevent damage to the speakers.
- Check Speaker Wire: Inspect speaker wires for frayed strands or short circuits. Ensure they are not touching each other or the amplifier chassis.
- Examine Drivers: Visually inspect the speaker cones and tweeters for any physical damage.
5.3 Imbalanced Sound
- Check Balance Settings: Verify the balance control on your amplifier/receiver is centered.
- Swap Speakers: Temporarily swap the left and right speakers to determine if the imbalance follows the speaker or remains with the channel.
6. Specifications
Detailed technical specifications for the Klipsch Reference R-800F Floorstanding Speaker.
Image 6.1: Dimensions of the Klipsch Reference R-800F Floorstanding Speaker.
| Feature | Specification |
|---|---|
| Model Name | R-800F |
| Mounting Type | Floor Standing |
| Speaker Type | Tower |
| Material | MDF board |
| Color | Black |
| Product Dimensions (H x W x D) | 43" x 10.9" x 17.5" (Approximate, based on image) |
| Item Weight | 54 Pounds |
| Speaker Maximum Output Power | 600 Watts |
| Impedance | 8 Ohms |
| Frequency Response | 21 KHz (Upper limit, full range not specified) |
| Woofer Diameter | 20.32 Centimeters (8 Inches) |
| Tweeter Diameter | 2.54 Centimeters (1 Inch) |
| Surround Sound Channel Configuration | 2.0 |
| Connectivity Technology | Speaker (Wired) |
| Recommended Uses | For Surround Sound Systems, Home Entertainment |
| Included Components | Speaker (1 per package) |
7. Warranty and Support
Your Klipsch Reference R-800F Floorstanding Speaker comes with a limited warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the warranty card included with your product or visit the official Klipsch website.
7.1 Customer Support
Should you require technical assistance, troubleshooting beyond this manual, or warranty service, please contact Klipsch customer support. Contact information can typically be found on the Klipsch website or in the product packaging.
For additional resources and product information, visit the Klipsch Store on Amazon.
