1. Product Overview
The MUBVIEW Wireless Indoor Chime is designed to provide audible notifications for your MUBVIEW J7, J9, and J9Plus wireless video doorbells. This compact device allows you to hear alerts when motion is detected or when someone presses your doorbell, ensuring you never miss a visitor.

Image 1.1: Front view of the MUBVIEW Wireless Indoor Chime, showing its compact design and speaker grille.
The chime features a built-in battery, offering flexibility in placement without the need for a constant power outlet. It supports multiple ringtones and adjustable volume levels to suit your preferences.
2. Setup and Pairing
Follow these steps to connect your MUBVIEW Wireless Indoor Chime with your video doorbell:
- Enter Pairing Mode: Locate the RESET button on the chime. Press the RESET button. The indicator light on the left side of the chime will flash red for 20 seconds, indicating that the chime is ready for pairing.
- Initiate Pairing from Doorbell: While the chime is in pairing mode (red light flashing), press the button on your MUBVIEW video doorbell.
- Confirmation: The chime will sound an alert, and its blue LED light will flash, confirming successful pairing.

Image 2.1: Diagram illustrating the MUBVIEW Wireless Indoor Chime's features, including up to 100M range, adjustable volume (80-110 dB), silent mode, and 4 ringtones, along with suggested placement within a home.
3. Operation
3.1. Chime Settings
The chime offers customizable settings for ringtones and volume:
- Ringtone Selection: The chime has 4 distinct ringtones available. Refer to the device's controls or the MUBVIEW app (if applicable) to cycle through and select your preferred ringtone.
- Volume Control: Adjust the volume to one of four available levels:
- Level 1: 110 dB
- Level 2: 100 dB
- Level 3: 90 dB
- Level 4: 80 dB
4. Maintenance
To ensure optimal performance and longevity of your MUBVIEW Wireless Indoor Chime, consider the following:
- Cleaning: Gently wipe the chime with a dry, soft cloth to remove dust. Avoid using liquid cleaners or abrasive materials.
- Battery Replacement: The chime requires 3 AAA batteries. Replace batteries when the device indicates low power or stops functioning as expected. Ensure correct polarity when inserting new batteries.
- Environmental Conditions: Keep the chime in a dry indoor environment, away from extreme temperatures and direct sunlight.
5. Troubleshooting
If you encounter issues with your MUBVIEW Wireless Indoor Chime, refer to the following common solutions:
- Chime Does Not Pair:
- Ensure the chime is in pairing mode (red indicator light flashing).
- Confirm your doorbell is powered on and functioning correctly.
- Try moving the chime closer to the doorbell during the pairing process to rule out range issues.
- If the red pairing signal appears but does not turn blue, attempt the pairing process again, ensuring the doorbell button is pressed firmly.
- No Sound or Low Volume:
- Check the volume settings and ensure it is not set to silent mode or the lowest level.
- Replace the AAA batteries if the chime is not responding or producing weak sound.
- Restoring Factory Defaults: If issues persist, you can restore the chime to its factory settings. Press and hold the RESET button for 5 seconds until the indicator light changes, then release. This will clear all previous pairings and settings.
6. Specifications
| Attribute | Detail |
|---|---|
| Manufacturer | MUBVIEW |
| Item Weight | 5.3 ounces |
| Package Dimensions | 4.13 x 4.06 x 2.2 inches |
| Batteries Required | 3 AAA batteries (not included) |
| Type of Bulb | LED |
| Mounting Type | Wall Mount |
| ASIN | B09P8C7XW1 |
7. Warranty and Support
MUBVIEW provides comprehensive support for its products:
- Warranty: A 12-month replacement service is offered for defective parts.
- Money-Back Guarantee: A 30-day money-back guarantee is available.
- Customer Service: MUBVIEW offers 24-hour customer service for inquiries and assistance.
- Contact: For support or to purchase additional MUBVIEW products, please visit the official MUBVIEW Store.





