douper 168

Download PDF
Contents

Douper Soft Close Toy Box Hinges Instruction Manual

Model: 168

1. Product Overview

The Douper Soft Close Toy Box Hinges are designed to provide a safe and controlled closing mechanism for various lids, including toy boxes, cabinet doors, and chests. This system ensures that lids close slowly and gently, preventing sudden drops and potential injuries, especially to children's fingers.

  • Soft-Close Lid Function: Provides a safe solution for toy box lids and cabinet doors, ensuring lids close slowly and gently to prevent pinched fingers.
  • Weight Capacity: Each Douper soft-close lid support can hold 2.3 kg to 4.5 kg (5 lbs to 10 lbs). When using two supports, the combined weight capacity is 4.5 kg to 9.1 kg (10 lbs to 20 lbs), ensuring a gentle descent.
  • Bidirectional Installation: These hinges can be installed for both top-opening and upward-opening lids. Each lid hinge is reversible, allowing for right or left-hand mounting. Their compact design facilitates installation in confined spaces.
  • Maximum Opening Angle: The dual lid hinge allows the lid to open to a maximum angle of 105 degrees.
Douper soft close hinge installed on a wooden toy box lid, showing the slow closing mechanism.
Image 1.1: Douper soft close hinge in action, demonstrating the gentle closing feature.

2. Setup and Installation

Proper installation is crucial for the optimal performance and safety of your Douper soft close hinges. The process is designed to be quick and straightforward.

2.1 Before Installation

  • Check Lid Dimensions: Douper lid supports are not suitable for lids wider than 68.6 cm (27 inches) or taller than 45.7 cm (18 inches).
  • Number of Hinges: For lids wider than 61 cm (24 inches), two hinges are recommended to ensure proper support and soft-closing action.
  • Internal Space Requirements:
    • For top-opening chests: Interior height must be greater than 13 cm (5.1 inches) and interior width greater than 16 cm (6.3 inches).
    • For upward-opening flap lids: Interior height must be greater than 22 cm (8.7 inches) and interior width greater than 9 cm (3.5 inches).
  • Package Contents: Ensure you have all components as shown in the package image, including the hinges and installation instructions/measurement card.
Diagram showing bearing capacity and recommended lid dimensions for Douper hinges.
Image 2.1: Bearing capacity and dimensional guidelines for lid compatibility.
Douper hinge package showing two hinges and an installation instruction card.
Image 2.2: Package contents, including hinges and the installation instruction card.

2.2 Installation Steps

  1. Positioning: Determine the desired mounting position for your hinge(s). The hinges are reversible and can be mounted on the right or left side of the lid.
  2. Use Measurement Card: Utilize the provided installation measurement card as a template. This card helps accurately mark the screw hole positions on both the lid and the cabinet/box frame.
  3. Mark Holes: Carefully mark the screw hole locations using a pencil through the template.
  4. Drill Pilot Holes (Optional but Recommended): For easier installation and to prevent wood splitting, drill small pilot holes at the marked locations.
  5. Attach Hinges: Securely fasten the hinge plates to the lid and the cabinet/box frame using appropriate screws. Ensure the hinge is aligned correctly for smooth operation.
  6. Test Operation: Gently open and close the lid to confirm the soft-close mechanism is functioning as expected. Adjust screw tightness if necessary.

Note: An installation video is referenced in the product description for visual guidance, but is not provided within this manual.

Close-up of the Douper hinge showing its reversible mounting plates for right or left hand installation.
Image 2.3: Reversible mounting design allows for flexible installation.

3. Operating Instructions

Once installed, the Douper soft close hinges operate automatically to ensure a controlled lid closure.

  • Opening the Lid: Simply lift the lid to your desired open position. The hinge allows for a maximum opening angle of 105 degrees.
  • Soft Closing: When closing the lid, gently push it downwards. The soft-close mechanism will engage, slowing the descent of the lid and allowing it to close quietly and safely without slamming.
  • Lid Stay Function: The hinge is designed to hold the lid open at various angles up to 105 degrees, providing convenient access without the lid falling unexpectedly.
Douper hinge installed, showing the lid open at a 105-degree angle.
Image 3.1: The hinge allows the lid to open up to a maximum of 105 degrees.

4. Maintenance

To ensure the longevity and continued smooth operation of your Douper soft close hinges, follow these simple maintenance guidelines:

  • Regular Cleaning: Wipe the hinges periodically with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or abrasive cleaners, which can damage the finish.
  • Check Screws: Over time, screws may loosen. Periodically check all mounting screws and tighten them if necessary to ensure the hinges remain securely attached.
  • Lubrication (If Needed): If you notice any squeaking or stiffness in the hinge mechanism, a small amount of silicone-based lubricant can be applied to the moving parts. Avoid oil-based lubricants, which can attract dust.
  • Inspect for Damage: Regularly inspect the hinges for any signs of wear, bending, or damage. If a hinge appears damaged, replace it immediately to maintain safety and functionality.

5. Troubleshooting

If you encounter issues with your Douper soft close hinges, consider the following common solutions:

  • Lid Not Closing Softly:
    • Check Weight Capacity: Ensure the lid's weight is within the specified range (2.3-4.5 kg per hinge, 4.5-9.1 kg for two hinges). If the lid is too heavy, the soft-close mechanism may struggle.
    • Number of Hinges: For wider lids (over 61 cm / 24 inches), ensure two hinges are installed. One hinge may not provide sufficient support for larger lids.
    • Alignment: Verify that the hinges are installed correctly and are not binding. Misalignment can impede smooth operation.
  • Lid Not Staying Open:
    • Lid Weight: If the lid is too light, it might not stay open reliably. The hinge requires a minimum weight to function optimally.
    • Installation Angle: Recheck the installation to ensure the hinge is mounted at the correct angle as per the measurement card.
  • Hinges Feel Loose:
    • Tighten Screws: Inspect all mounting screws and tighten any that have become loose.
    • Wood Condition: If screws are stripping out of the wood, consider using slightly larger screws or wood filler to secure them.

6. Product Specifications

FeatureSpecification
Branddouper
Model Number168
Manufacturerdouper ltd
Product Dimensions (L x W x H)17.78 x 12.7 x 2.54 cm (7 x 5 x 1 inches)
Item Weight358 grams (0.79 lbs)
Quantity of Items1 (contains 2 hinges)
Number of Pieces2 (hinges)
FinishUnfinished
Mounting TypeDoor Mount
Weight Capacity (per hinge)2.3 kg - 4.5 kg (5 lbs - 10 lbs)
Weight Capacity (two hinges)4.5 kg - 9.1 kg (10 lbs - 20 lbs)
Maximum Opening Angle105 degrees
UPC749102974139

7. Warranty Information

Specific warranty details for Douper products may vary. Please refer to the product packaging or the retailer's website where you purchased the hinges for the most accurate and up-to-date warranty information. Generally, products are covered against manufacturing defects for a reasonable period from the date of purchase.

8. Customer Support

For further assistance, technical support, or inquiries regarding your Douper Soft Close Toy Box Hinges, please contact the retailer or the manufacturer directly. Keep your purchase receipt and model number (168) handy when contacting support.

Manufacturer: douper ltd

© 2024 Douper. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.