Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your TEEHO TE001 Keyless Entry Door Lock. Designed for convenience and security, this smart deadbolt offers multiple access methods and robust protection for your home. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your lock.
Key Features
- Passcode Entry: Supports up to 20 unique access codes for family members and temporary codes for guests.
- One-Time Code: Generate single-use PIN codes that automatically delete after first use.
- Smart Locking: Features an adjustable automatic door lock (10-99 seconds) and one-touch auto-lock by pressing and holding any key for 2 seconds.
- Security Deadbolt: Constructed from sturdy aluminum alloy, offering IP54 weather resistance, anti-peeping user code protection, and a low battery indicator.
- Easy Installation: Designed for quick installation with a screwdriver, suitable for most users.
Installation Guide
Pre-Installation Checklist
- Ensure your door hole is 2-1/8" (54mm) in diameter. The lock is not compatible with 38mm door holes.
- Verify door thickness is between 1-3/8" and 2" (35mm to 50mm).
- Required tools: Phillips head screwdriver.
- 4 AA alkaline batteries (not included).
Step-by-Step Installation
The TEEHO TE001 lock is designed for easy installation, typically requiring only a screwdriver. For detailed visual instructions, please refer to the official Installation Manual PDF available on the product page or contact customer support.
- Prepare the door: Ensure the door is properly drilled according to the dimensions shown in Figure 4.
- Install the latch: Insert the latch into the door edge and secure it with screws.
- Install the exterior assembly: Route the cable through the door hole and align the exterior keypad assembly.
- Install the interior mounting plate: Secure the mounting plate to the exterior assembly using screws.
- Connect the cable and install the interior assembly: Connect the cable from the exterior assembly to the interior assembly. Secure the interior assembly to the mounting plate.
- Insert batteries: Install 4 AA alkaline batteries into the battery compartment.
- Perform door handing process: Follow the programming instructions to calibrate the lock to your door's orientation.
Operating Instructions
Setting User Codes
The lock supports up to 20 individual user codes. Refer to the programming instructions provided with your lock to add, modify, or delete user codes. A master code is required for programming.
One-Time PIN Codes
For temporary access, you can generate a one-time PIN code. This code will automatically be deleted after it is used once. This is ideal for service personnel or deliveries.
Auto-Lock Function
The lock can be configured to automatically lock after a set period (10-99 seconds) once the door is closed. This feature enhances security by ensuring your door is always locked.
One-Touch Locking
To quickly lock the door from the outside, simply press and hold any key on the keypad for 2 seconds. This provides immediate security without needing to re-enter a code.
Anti-Peeping Feature
To prevent others from guessing your code by observing your finger movements, you can enter random digits before or after your actual PIN code. The lock will only recognize the correct sequence within the longer string of numbers.
Maintenance
Battery Replacement
The TEEHO TE001 lock is powered by 4 AA batteries (not included). It features a low battery indicator to alert you when batteries need replacement. For optimal performance, use high-quality alkaline batteries. Battery life can last up to 1 year under normal usage conditions.
Weather Resistance
The lock has an IP54 weather resistance rating, meaning it is protected from dust and splashing water from any direction. This makes it suitable for outdoor use on front doors, but it is not designed for submersion or direct water jets.
Troubleshooting
Common Issues
- Lock not responding: Check battery levels. Replace batteries if low.
- Keypad not lighting up: Ensure batteries are correctly inserted and charged.
- Auto-lock not engaging: Verify door alignment and ensure the deadbolt can extend fully without obstruction. Check auto-lock settings.
- Forgotten Master Code: A factory reset may be required.
How to Reset the Product
If you encounter persistent issues or need to reset the lock to factory settings, follow the instructions in the video below. This process typically involves removing a battery and pressing a reset button.
Video 1: Official TEEHO Guide on How to Reset the Product (Duration: 21 seconds)
Product Specifications
| Specification | Detail |
|---|---|
| Brand | TEEHO |
| Model Name | TE001 |
| Lock Type | Keypad Deadbolt Door Lock |
| Material | Aluminum Alloy |
| Color | Matte Black |
| Item Dimensions (L x W x H) | 5.12 x 2.95 x 1.3 inches |
| Item Weight | 1 Pounds |
| Power Source | 4 x AA Batteries (not included) |
| Special Features | Battery Indicator, Back-Lit Keypad, 20 Individual User Codes, One-time Access, Auto Lock, One-touch Lock, Anti-peeping Password, Vacation Mode, Mute Mode, Wrong Entry Limit, IP54 Waterproof |
| Recommended Uses | Indoor door lock, outdoor door lock |
Warranty and Support
TEEHO offers a 30-day customer commitment, a 1-year product support on all parts, and lifetime after-sales customer service. This includes online phone support from Monday to Friday, 9 AM to 5 PM PST, and 24/7 online email service.
For further assistance, please refer to the User Guide (PDF) provided with your product or visit the official TEEHO website for contact information.
