AZZA Hurricane III ARGB Case Fan 120mm User Manual

1. Introduction

The AZZA Hurricane III ARGB Case Fan 120mm is designed to provide efficient cooling and vibrant digital RGB lighting for your computer system. Featuring a dual-ring design with individually addressable RGB LED diodes (5V), this fan enhances both performance and aesthetics. Its unique blade design improves airflow, while rubber pads on all four corners reduce vibration and noise, ensuring quiet operation. The fan can be synchronized with compatible motherboards or lighting controllers for customizable lighting effects and fan speed control.

2. Safety Information

• Ensure your power supply is disconnected before installation or maintenance to prevent electrical shock.
• Handle the fan and its components with care to avoid damage.
• Do not expose the fan to excessive moisture or extreme temperatures.
• Verify correct voltage (DC12V for fan, 5V for RGB LED) before connecting to your system. Incorrect voltage can damage the fan or motherboard.
• Keep out of reach of children.

3. Package Contents

Please check the package contents to ensure all items are present:

• 1 x AZZA Hurricane III ARGB Case Fan 120mm
• Mounting Screws (typically 4 screws)
• (Optional: RGB controller cable, if included in specific kit)

4. Setup and Installation

Follow these steps to install your AZZA Hurricane III ARGB Case Fan:

1. Prepare Your System: Power off your computer and disconnect it from the power outlet. Open your computer case to access the fan mounting locations.
2. Identify Mounting Location: Choose an appropriate 120mm fan mounting spot in your case (e.g., front, rear, top, bottom).
3. Position the Fan: Place the fan in the desired mounting position. Ensure the airflow direction is correct for your cooling needs (typically, fans are installed to draw cool air in or exhaust hot air out).
4. Secure the Fan: Use the provided mounting screws to secure the fan to the case. Tighten the screws evenly to prevent vibration. The fan features rubber pads on all four corners to reduce vibration and noise.
5. Connect Power: Connect the fan's 4-pin PWM connector to an available 4-pin fan header on your motherboard.
6. Connect RGB (if applicable): Connect the fan's 5V 3-pin ARGB connector to a compatible 5V 3-pin addressable RGB header on your motherboard or an ARGB controller. Do not connect to a 12V RGB header, as this will damage the LEDs.
7. Cable Management: Route the cables neatly to avoid obstructing airflow and for a clean build.
8. Close Case and Power On: Close your computer case, reconnect the power, and power on your system.

Image 1: The AZZA Hurricane III ARGB Case Fan 120mm, showcasing its dual-ring design and vibrant, individually addressable RGB lighting. The fan features a central AZZA logo and black rubber pads on its corners for vibration dampening.

5. Operating Instructions

Once installed, the AZZA Hurricane III ARGB Case Fan operates automatically based on your motherboard's fan control settings. The RGB lighting can be controlled via your motherboard's software or a dedicated ARGB controller.

• Fan Speed Control: The fan speed (1000 - 1800 ± 10% RPM) is typically controlled through your motherboard's BIOS/UEFI settings or fan control software. This allows you to adjust the fan's performance based on system temperature or desired noise levels.
• RGB Lighting Control:
  • If connected to a motherboard's 5V 3-pin ARGB header, use the motherboard manufacturer's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync) to customize lighting effects, colors, and synchronization with other ARGB components.
  • If connected to a standalone ARGB controller, refer to the controller's manual for instructions on changing lighting modes and colors.

6. Maintenance

Regular maintenance helps ensure optimal performance and longevity of your fan:

• Cleaning: Periodically clean the fan blades and frame to remove dust buildup. Use compressed air or a soft, dry cloth. Ensure the fan is powered off and disconnected from the system before cleaning.
• Inspection: Check for any loose cables or obstructions around the fan that might impede its operation.
• Bearing: The fan uses a Hydro Bearing, which is designed for long-term, quiet operation and typically does not require lubrication.

7. Troubleshooting

8. Specifications