Ecoprsio Entryway Table with Outlets and USB Ports

Introduction

Thank you for choosing the Ecoprsio Entryway Table. This manual provides essential information for the safe assembly, operation, and maintenance of your new console table. Please read it thoroughly before beginning assembly and retain it for future reference.

Image: The Ecoprsio 32-inch Grey Oak Entryway Table, showcasing its two drawers, two mesh shelves, and integrated power strip.

Safety Information

Please observe the following safety precautions to prevent injury or damage to the product:

• Placement: Ensure proper placement to prevent tripping.
• Power Cord: Secure the power cord to prevent tangling or tripping hazards.
• Assembly: Assemble and secure the table properly to prevent tipping.
• Indoor Use: This product is intended for indoor use only.
• Weight Capacity: Do not exceed the maximum weight recommendation of 220 pounds.

Package Contents

Before assembly, verify that all components are present and undamaged. Refer to the parts list included in your packaging for detailed identification of each piece. Typically, your package will include:

• Tabletop with integrated drawers
• Metal frame components
• Mesh shelves (2)
• Power strip with 2 AC outlets and 2 USB ports
• Adjustable foot pads
• Assembly hardware (screws, bolts, etc.)
• Assembly tools (e.g., screwdriver)
• Instruction manual

Assembly Instructions

Assembly of the Ecoprsio Entryway Table is designed to be straightforward. Follow the numbered steps and diagrams provided in your included instruction booklet. A screwdriver is recommended for assembly.

1. Unpack all components and lay them out on a clean, soft surface to prevent scratches.
2. Identify each part using the provided labels (letters for large parts, numbers for hardware).
3. Attach the metal frame components according to the diagrams.
4. Secure the tabletop to the frame.
5. Install the mesh shelves at your desired height. The shelves are adjustable.
6. Mount the power strip to either side of the table as preferred.
7. Attach the adjustable foot pads to the bottom of the table legs.
8. Tighten all screws and connections to ensure stability.

Image: A detailed diagram illustrating the dimensions of the table (32"W x 11.8"D x 31.8"H) and the adjustable height options for the lower shelves.

Features and Operation

• Integrated Power Strip: The table includes a power strip with 2 AC outlets and 2 USB ports. This can be installed on either side of the table for convenient charging of electronic devices.
• Storage Drawers: Two spacious drawers provide enclosed storage. They are designed with stops to prevent them from falling out when fully opened.
• Adjustable Shelves: Two mesh shelves offer additional storage and display space. Their height can be adjusted during assembly to accommodate various items.
• Adjustable Foot Pads: The table is equipped with adjustable foot pads to ensure stability on uneven floors.
• Cable Management: Velcro tape is included to help organize and secure power cords, maintaining a tidy appearance.

Image: A detailed view highlighting the built-in power outlets, the included Velcro tape for cable organization, and the adjustable foot pads for stability.

Maintenance

To ensure the longevity and appearance of your entryway table, follow these maintenance guidelines:

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
• Spills: Clean up spills immediately to prevent staining, especially on the wood veneer surfaces.
• Inspection: Periodically check all screws and connections and tighten if necessary to maintain stability.
• Environment: Avoid placing the table in direct sunlight or near heat sources to prevent material degradation.

Troubleshooting

If you encounter any issues with your Ecoprsio Entryway Table, refer to the following common solutions:

• Wobbling Table: Adjust the foot pads at the bottom of the legs to stabilize the table on uneven surfaces. Ensure all assembly screws are securely tightened.
• Drawers Not Sliding Smoothly: Check for any obstructions in the drawer glides. Ensure the drawers are correctly inserted into their tracks.
• Power Outlets Not Working: Verify that the power cord is securely plugged into a functional wall outlet. Check if the circuit breaker for the outlet has tripped.
• Missing Parts or Damaged Components: If you find any missing parts or damaged components upon unpacking, please contact Ecoprsio customer service for assistance.

Specifications

Warranty and Support

Ecoprsio is committed to providing high-quality products. For any issues regarding quality or assembly, please contact our customer service. We aim to respond within 24 hours to assist you.

For specific warranty details, please refer to the documentation included with your purchase or visit the official Ecoprsio website.