Adiding UC-650

Adiding 650mL Ultrasonic Jewelry Cleaner (Model UC-650) User Manual

Model: UC-650

Introduction

Thank you for choosing the Adiding 650mL Ultrasonic Jewelry Cleaner. This device uses 45KHz ultrasonic waves to generate millions of microscopic cleaning bubbles, providing a thorough 360-degree cleaning action for various items. It is designed for efficient and gentle cleaning without the need for harsh scrubbing.

Adiding Ultrasonic Jewelry Cleaner in use, showing items like a watch, ring, and makeup brush being cleaned by ultrasonic waves.

Image: The Adiding Ultrasonic Jewelry Cleaner demonstrating its efficient, deep, and precision cleaning capabilities for various items.

Important Safety Information

  • Read all instructions before use.
  • Do not leave the device unattended during operation. Unplug the device when not in use and before cleaning.
  • Keep out of reach of children. This appliance is not intended for use by persons with reduced physical, sensory, or mental capabilities unless supervised.
  • Use only tap water or appropriate cleaning solutions. Do not use flammable or corrosive liquids.
  • Avoid cleaning certain items:
    • Prescription sunglasses or eyeglasses with a coating or scratches.
    • Porous, adhesive-bonded, or non-waterproof items.
    • Thin or fragile glass.
    • Tarnished jewelry will not become shiny after cleaning; ultrasonic cleaners remove dirt and grime, not tarnish.
  • Ensure proper ventilation. Do not block ventilation openings.
  • Do not immerse the main unit in water. Clean the exterior with a damp cloth.
  • Inspect the power cord and plug regularly. Do not operate if damaged.

Product Overview

The Adiding UC-650 Ultrasonic Cleaner is a compact and powerful device designed for effective cleaning of various small items. It features a durable SUS304 stainless steel tank and a user-friendly digital interface.

Key Features:

  • Ultrasonic Frequency: 45KHz for deep and efficient cleaning.
  • Power: 35W.
  • Capacity: 650mL (23oz) stainless steel tank.
  • Timer Settings: 5 preset cycles (90s, 180s, 280s, 380s, 480s).
  • Degas Mode: The 480s cycle includes a degas mode for enhanced cleaning efficiency.
  • Low Noise Operation: Operates below 60dB.
  • Safety: Auto shut-off function.
  • Accessories: Includes a cleaning basket and a watch holder.
Adiding Ultrasonic Jewelry Cleaner with dimensions and capacity labeled.

Image: Overview of the Adiding Ultrasonic Cleaner, highlighting its 650mL capacity and physical dimensions.

Components of the Adiding Ultrasonic Cleaner including SUS304 stainless steel tank, detachable power cord, dedicated basket, and non-slip rubber pads.

Image: Detailed view of the cleaner's components: SUS304 stainless steel tank, detachable power cord, dedicated cleaning basket, and non-slip rubber pads.

Setup

  1. Unpack: Carefully remove the ultrasonic cleaner and all accessories from the packaging.
  2. Placement: Place the unit on a stable, flat, and dry surface, away from heat sources and direct sunlight.
  3. Connect Power: Insert the detachable power cord into the port on the back of the unit, then plug the other end into a standard electrical outlet.
  4. Fill Tank: Open the lid and fill the stainless steel tank with tap water. Ensure the water level is between the 'MIN' and 'MAX' indicators. Do not overfill.
  5. Optional Cleaning Solution: For enhanced cleaning, a small amount of non-corrosive, non-flammable cleaning detergent can be added to the water.

Operating Instructions

  1. Prepare Items: Place the items to be cleaned into the dedicated cleaning basket. For watches, use the provided watch holder.
  2. Insert Basket: Carefully lower the basket with items into the water-filled tank. Ensure items are fully submerged but not touching the bottom of the tank directly.
  3. Close Lid: Close the transparent lid securely.
  4. Select Time Mode: Press the "Time" button repeatedly to cycle through the 5 preset cleaning cycles: 90s, 180s, 280s, 380s, and 480s. The selected time will be displayed on the digital screen.
  5. Start Cleaning: Press the "ON/OFF" button to start the cleaning process. The device will begin operating, and the timer will count down.
  6. Degas Mode (480s): The 480s cycle incorporates a degas mode, which pauses for 1 second after every 2 seconds of operation. This intermittent action helps to remove air bubbles from the water, improving cleaning efficiency.
  7. Completion: The device will automatically shut off once the selected cleaning cycle is complete.
  8. Remove Items: Open the lid and carefully lift out the cleaning basket. Rinse the cleaned items under running water and dry them with a soft cloth.
Step-by-step guide on how to use the Adiding Ultrasonic Cleaner: Add water, put item in, press time, press on/off.

Image: Visual guide for operating the ultrasonic cleaner, showing steps from adding water to starting a cleaning cycle.

Video: Demonstration of the Adiding Ultrasonic Jewelry Cleaner in operation, showcasing the digital timer and cleaning process.

Maintenance

  • Empty and Rinse: After each use, unplug the device, empty the water from the tank, and rinse the tank with clean water.
  • Clean Exterior: Wipe the exterior of the unit with a soft, damp cloth. Do not use abrasive cleaners or immerse the unit in water.
  • Dry Thoroughly: Ensure the tank and exterior are completely dry before storing.
  • Storage: Store the ultrasonic cleaner in a cool, dry place, away from direct sunlight and out of reach of children.

Troubleshooting

Problem Possible Cause Solution
Unit does not turn on. No power supply; power cord not connected properly. Ensure the power cord is securely plugged into both the unit and the electrical outlet. Check if the outlet is functional.
Cleaning effect is poor. Insufficient water; items are too dirty; incorrect cleaning cycle selected; items not suitable for ultrasonic cleaning. Ensure water level is correct. Pre-rinse heavily soiled items. Select a longer cleaning cycle or use degas mode. Add a suitable cleaning solution. Confirm items are compatible with ultrasonic cleaning.
Unit stops unexpectedly. Cleaning cycle completed; overheating. This is normal if the cycle finished. If not, unplug the unit and let it cool down for 10-15 minutes before restarting. Ensure proper ventilation.
Excessive noise during operation. Items touching the tank directly; unit not on a stable surface. Ensure items are placed in the basket and not directly on the tank bottom. Place the unit on a flat, stable surface.

Specifications

  • Model: UC-650
  • Product Dimensions: 8.98 x 6.26 x 5.67 inches
  • Item Weight: 1.87 pounds
  • Tank Capacity: 650mL (23oz)
  • Ultrasonic Frequency: 45KHz
  • Power: 35W
  • Tank Material: SUS304 Stainless Steel
  • Timer Settings: 90s, 180s, 280s, 380s, 480s
  • Manufacturer: Adiding
  • Certifications: FCC, RoHS

Warranty and Support

The Adiding 650mL Ultrasonic Jewelry Cleaner (Model UC-650) comes with an 18-month warranty. For any product-related issues, questions, or support needs, please contact Adiding customer service. We aim to provide a response within 24 hours and offer easy replacement solutions.

For further assistance, please refer to the official Adiding store or contact their customer support channels.

© 2023 Adiding. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.