PHI VILLA 6 PCS Rattan 1
PHI VILLA Outdoor Rattan Dining Chairs (6-Piece Set) Instruction Manual
Model: 6 PCS Rattan 1 | Brand: PHI VILLA
1. Introduction
This manual provides essential information for the safe assembly, operation, and maintenance of your PHI VILLA Outdoor Rattan Dining Chairs. Please read all instructions carefully before use and retain this manual for future reference.
2. Safety Information
- Always assemble according to the provided instructions.
- Do not exceed the maximum weight recommendation of 300 lbs (136 kg) to ensure safety and stability.
- Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as necessary.
- Place chairs on a flat, stable surface to prevent tipping.
- Keep children away from the assembly area and ensure all small parts are out of reach.
- Avoid placing hot items directly on the rattan surface without protection.
3. Package Contents
Verify that all components are present before beginning assembly. If any parts are missing or damaged, contact customer service.
- 6 x Rattan Dining Chairs
- 6 x Removable Cushions
- Installation Hardware (screws, washers, Allen wrench)
- User Manual (this document)

Image: Components of the PHI VILLA Outdoor Rattan Dining Chairs, including chair frames and cushions.
4. Assembly Instructions
Assembly is required for these chairs. All necessary hardware and tools are included. It is recommended to assemble the chairs on a soft, clean surface to prevent scratches.
- Unpack all components and lay them out. Identify the chair back, seat, and armrests/legs.
- Attach the armrests/legs to the chair seat using the provided screws and Allen wrench. Do not fully tighten yet.
- Attach the chair back to the assembled seat and armrests/legs.
- Once all parts are loosely connected, place the chair upright on a flat surface. Gently rock the chair to ensure it is level.
- Evenly tighten all screws until secure. Do not overtighten.
- Place the removable cushions onto the chair seats.

Image: Fully assembled PHI VILLA Outdoor Rattan Dining Chair with cushion.
Assembly Video Guide
Video: Detailed assembly instructions for PHI VILLA Wicker Chairs. (Creator: PHI VILLA)
5. Operating Instructions
The PHI VILLA Outdoor Rattan Dining Chairs are designed for comfortable outdoor seating. They can be used in various configurations on patios, decks, yards, and porches.
- Use the chairs for dining, relaxation, or social gatherings.
- The lightweight design allows for easy repositioning as needed.
- Ensure cushions are properly seated for optimal comfort.

Image: PHI VILLA Rattan Dining Chairs arranged around an outdoor dining table.
6. Maintenance
Proper care will extend the life and appearance of your PHI VILLA chairs.
6.1 Cleaning
- Rattan Frame: Wipe with a damp cloth and mild soap. Rinse thoroughly and dry completely. Avoid harsh chemicals or abrasive cleaners.
- Cushions: The cushion covers are made of water-resistant fabric and are removable with a zipper closure for easy cleaning. Hand wash with mild soap and water, or machine wash on a gentle cycle with cold water. Air dry only. Do not bleach or iron.
6.2 Storage and Protection
- While the chairs are weather-resistant, prolonged exposure to extreme weather conditions (heavy rain, snow, intense sun) can affect their lifespan.
- Consider using outdoor furniture covers when not in use, especially during off-seasons, to protect against fading and wear.
- Store cushions indoors during inclement weather or when not in use for extended periods.

Image: Close-up view of the durable, hand-woven rattan material.
7. Troubleshooting
If you encounter any issues with your chairs, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Chair feels wobbly | Loose screws or uneven surface. | Check and tighten all assembly screws. Ensure the chair is on a flat, level surface. |
| Cushions fading | Prolonged exposure to direct sunlight. | Store cushions indoors or use furniture covers when not in use. |
| Rattan appears damaged | Physical impact or extreme weather exposure. | Contact customer service for repair advice or replacement parts. |
8. Specifications
- Brand: PHI VILLA
- Model: 6 PCS Rattan 1
- Material: Weather-resistant Resin Wicker Rattan, Powder-coated Steel Frame
- Color: Brown Rattan with Blue Cushions
- Chair Dimensions: 23.8" (L) x 19.7" (W) x 34.4" (H)
- Weight Capacity: 300 lbs per chair
- Assembly Required: Yes
- Included Components: Cushion, Installation Hardware, User Manual

Image: Detailed dimensions of the PHI VILLA Outdoor Rattan Dining Chair.
9. Warranty and Support
For warranty information, please refer to the product packaging or contact PHI VILLA customer service directly. For any questions, missing parts, or support needs, please visit the PHI VILLA Store on Amazon or contact their support team.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.