Hoobro EWT112HX01 Shoe Bench with Coat Rack Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Hoobro EWT112HX01 Shoe Bench with Coat Rack. Please read this manual thoroughly before assembly and use to ensure safe and correct operation of the product. Keep this manual for future reference.

Important Safety Information

Failure to follow these safety instructions may result in injury or damage to the product.

• Keep the shoe bench away from sharp objects and corrosive chemicals.
• Position the product away from direct heat sources, direct sunlight, or excessive moisture.
• Do not exceed the maximum static load capacity of 99 kg (218 lbs) on the bench surface.
• Ensure all screws and fasteners are securely tightened during assembly and periodically check for tightness during use.
• This product is intended for indoor use only.

Package Contents

Please verify that all components listed below are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

• 1 x Hoobro EWT112HX01 Shoe Bench
• 1 x Set of Mounting Accessories (screws, dowels, etc.)
• 1 x Instruction Manual (this document)

Setup and Assembly

Assembly is required for this product. It is recommended to have at least two people for assembly. Please prepare a Phillips head screwdriver (not included) and follow the steps carefully.

Step 1: Unpack and Identify Components

Carefully unpack all parts and lay them out on a clean, soft surface to prevent scratches. Refer to the parts list in your included instruction manual to identify each component.

Step 2: Assemble the Shoe Bench Frame

Begin by attaching the side panels to the bottom and top panels using the provided screws. Ensure the pre-drilled holes align correctly. Do not overtighten screws until the entire frame is loosely assembled.

Image: Product dimensions for the shoe bench (100cm L x 30cm W x 48cm H) and coat rack (78cm L x 8cm H).

Step 3: Install Internal Dividers

Insert the vertical and horizontal dividers into the shoe bench frame to create the 12 storage compartments. Secure them with the appropriate fasteners as indicated in the manual. Ensure they are firmly in place for structural integrity.

Step 4: Attach the Padded Cushion

Place the padded cushion on top of the shoe bench. The cushion is designed to be removable for cleaning and is typically secured with Velcro strips on the underside to prevent slipping.

Image: Detailed view of the cushion's Velcro attachment, a shoe compartment, and the cushion's fabric texture.

Step 5: Assemble and Mount the Coat Rack

Attach the hooks to the coat rack boards using the provided screws. Once assembled, choose a suitable wall location for mounting. Use the included mounting accessories (screws and wall anchors) to securely fasten the coat rack to the wall. Ensure it is level and capable of supporting the weight of coats and other items.

Image: Close-up of the coat rack with hooks, demonstrating its use for hanging garments and accessories.

Step 6: Final Tightening and Placement

Once all components are assembled, go back and securely tighten all screws. Place the assembled shoe bench and mounted coat rack in your desired entryway or room, ensuring it is stable and not wobbly.

Image: The Hoobro shoe bench and coat rack fully assembled and in use in an entryway.

Operating Instructions

The Hoobro EWT112HX01 is designed for convenient storage and seating in your entryway or other living spaces.

• Shoe Storage: Utilize the 12 individual compartments to organize shoes, keeping them tidy and easily accessible. Each compartment is suitable for various shoe sizes.
• Seating: The padded bench provides a comfortable spot to sit while putting on or taking off shoes. Ensure the weight limit of 99 kg (218 lbs) is not exceeded.
• Coat and Accessory Hanging: The wall-mounted coat rack features 9 hooks for hanging coats, jackets, hats, scarves, bags, and other entryway essentials. Distribute weight evenly across the hooks.
• Versatile Storage: Beyond shoes, the compartments can also be used for storing small baskets, books, or decorative items, making it a versatile organizer for living rooms or bedrooms.

Maintenance

Proper care will extend the life and appearance of your Hoobro shoe bench and coat rack.

• Cleaning the Frame: Wipe the wooden frame surfaces with a dry, soft cloth. For stubborn marks, a slightly damp cloth followed immediately by a dry cloth can be used. Avoid abrasive cleaners or harsh chemicals.
• Cushion Care: The padded cushion can be removed for cleaning. Spot clean with a mild detergent and water solution. Allow to air dry completely before reattaching. Do not machine wash or tumble dry.
• Hardware Check: Periodically check all screws and fasteners to ensure they remain tight. Retighten as necessary to maintain stability.
• Environmental Conditions: Avoid prolonged exposure to direct sunlight, high humidity, or extreme temperature changes to prevent warping or discoloration.

Troubleshooting

If you encounter any issues with your Hoobro shoe bench and coat rack, refer to these common solutions:

• Wobbly Bench/Rack: Ensure all screws are fully tightened. If the floor is uneven, consider using furniture pads or shims under the bench legs to stabilize it. For the coat rack, ensure it is securely mounted to wall studs or appropriate wall anchors.
• Missing Parts: Double-check the packaging and compare with the parts list in the manual. If parts are genuinely missing, contact Hoobro customer support with your purchase details.
• Difficulty Assembling: Review the assembly steps carefully. Sometimes, parts may be oriented incorrectly. Do not force components together. If issues persist, refer to the diagrams or seek assistance.

Specifications

Warranty and Support

For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Hoobro customer support through their official website or the contact information provided with your product packaging.