MENABO Chrono 000123000000 Roof Rack Instruction Manual

1. Product Overview

The MENABO Chrono 000123000000 is an aluminum roof rack designed for secure transportation of bicycles, including large-sized bikes such as e-bikes and fat bikes. It is engineered for mounting on vehicle roof bars and features a robust construction with double anti-theft mechanisms for both the bike and the rack itself.

An assembled MENABO Chrono roof rack, shown from an angled perspective. The rack features a silver aluminum main rail with a black U-shaped arm for securing the bike frame and a black wheel tray at the front. A black mechanism for attachment to roof bars is visible in the center, and a strap for the rear wheel is at the far end.

2. Safety Information

• Do not exceed the maximum load capacity of 25 kg (55 lb) for the rack or your vehicle's roof load limit, whichever is lower.
• Ensure all mounting hardware is securely tightened before each use.
• Verify the bike is properly secured to the rack before driving.
• Drive at appropriate speeds, especially when carrying a bike, and be aware of increased vehicle height and width.
• Regularly inspect the rack for any signs of wear, damage, or loose components.
• Consult your vehicle's owner's manual for specific roof load recommendations and restrictions.

3. Package Contents

The MENABO Chrono roof rack package typically includes:

• 1x MENABO Chrono Roof Rack unit
• Mounting hardware for roof bars (T-screw 20 mm / 0.8 inches)
• Straps for wheel securing
• Keys for anti-theft locking mechanisms

Note: An optional mounting kit (000122700000) may be required for roof bars with dimensions outside the standard T-screw compatibility (minimum 30 x 20 mm / 1.2 x 0.8 inches, maximum 55 x 30 mm / 2.2 x 1.2 inches).

4. Setup and Installation

4.1 Mounting to Roof Bars

1. Ensure your vehicle's roof bars are correctly installed and rated for the combined weight of the rack and your bicycle.
2. Position the MENABO Chrono rack on your roof bars.
3. Utilize the provided T-screw 20 mm (0.8 inches) mounting system to secure the rack to the roof bars. Follow the specific instructions in the included diagram for proper attachment and tightening.
4. If your roof bars require it, use the optional mounting kit (000122700000) for bars measuring between 30 x 20 mm (1.2 x 0.8 inches) and 55 x 30 mm (2.2 x 1.2 inches).
5. Tighten all fasteners firmly, but do not overtighten.
6. Engage the anti-theft lock for the rack to secure it to your vehicle.

4.2 Securing the Bike

1. Lift the bicycle onto the roof rack, aligning the wheels with the wheel trays.
2. Position the bike's frame within the U-shaped arm.
3. Adjust the arm to firmly grip the bike frame. Ensure the grip is secure without damaging the frame.
4. Use the provided straps to secure both the front and rear wheels to the rack's wheel trays.
5. Engage the anti-theft lock for the bike to prevent unauthorized removal.
6. Perform a final check to ensure the bike is stable and all components are locked and tightened before driving.

5. Operating Instructions

5.1 Loading and Unloading a Bicycle

• Loading: Unlock the bike's anti-theft mechanism. Lift the bike onto the rack, aligning wheels and frame. Secure the frame arm and strap the wheels. Lock the anti-theft mechanism.
• Unloading: Unlock the bike's anti-theft mechanism. Release the wheel straps and the frame arm. Carefully lift the bike off the rack.

5.2 Usage Guidelines

• Always check the security of the rack and bike before starting any journey.
• Be mindful of low clearances (e.g., garages, drive-thrus) due to the increased height of your vehicle with the bike mounted.
• Avoid sudden braking or sharp turns when carrying a bike.
• For long journeys, periodically check the rack and bike for stability and tightness.

6. Maintenance

• Clean the rack regularly with mild soap and water to remove dirt and road grime. Avoid abrasive cleaners.
• Inspect all moving parts, straps, and locking mechanisms for wear or damage. Replace any worn components immediately.
• Lubricate moving parts as necessary to ensure smooth operation.
• Store the rack in a dry place when not in use to prolong its lifespan.

7. Troubleshooting

8. Specifications

9. Warranty and Support

For warranty information, technical support, or to purchase replacement parts, please contact MENABO customer service directly. Refer to the contact details provided with your product packaging or visit the official MENABO website.