Imetec Electric Blanket User Manual

1. Introduction

Thank you for choosing the Imetec 16803 Electric Blanket. This manual provides important information regarding the safe operation, installation, maintenance, and troubleshooting of your electric blanket. Please read this manual thoroughly before using the product and retain it for future reference.

Image: The Imetec 16803 Electric Blanket, shown in its white color, laid out flat. This image illustrates the general appearance of the product.

2. Important Safety Instructions

To reduce the risk of burns, electric shock, fire, and injury to persons, this product must be used in accordance with the following instructions:

• Read all instructions before using the electric blanket.
• Do not use this blanket with an infant, a child, an invalid, or any person insensitive to heat.
• Do not use this blanket with a damaged cord or plug. If the cord or plug is damaged, contact qualified service personnel for repair.
• Do not use this blanket in conjunction with another heating appliance.
• Do not use this blanket if it is wet.
• Do not fold, crease, or bunch the blanket during use. Ensure it lies flat on the bed.
• Do not insert pins or other metallic objects into the blanket.
• Do not dry clean this blanket. Dry cleaning solvents may damage the insulation of the heating element.
• Do not iron the blanket.
• Always unplug the blanket from the electrical outlet when not in use.
• Keep the control unit away from drafts and moisture.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

3. Setup Instructions

Follow these steps to set up your Imetec electric blanket:

1. Unpack: Carefully remove the electric blanket from its packaging. Retain all packaging materials for potential future storage or transport.
2. Position: Lay the blanket flat on your mattress, ensuring it is spread evenly without any folds or creases. The blanket should be placed directly on the mattress, underneath your fitted sheet.
3. Connect Control Unit: Locate the connector on the blanket and the corresponding plug on the control unit. Firmly push the plug into the connector until it clicks into place.
4. Plug In: Insert the power plug of the control unit into a suitable electrical outlet. Ensure the outlet is easily accessible and provides the correct voltage for the appliance.

4. Operating Instructions

To operate your Imetec electric blanket:

1. Turn On: With the blanket properly set up and plugged in, switch on the control unit. Typically, there is a power button or a slide switch.
2. Select Heat Setting: Use the control unit to select your desired heat level. Most models offer multiple heat settings, indicated by numbers or symbols. Start with a lower setting and adjust as needed for comfort.
3. Pre-heating: For best results, turn on the blanket approximately 30 minutes before you intend to use the bed to allow it to pre-heat.
4. Turn Off: When you are finished using the blanket or before leaving the bed, switch off the control unit and unplug the blanket from the electrical outlet.

5. Maintenance and Cleaning

Proper care ensures the longevity and safe operation of your electric blanket.

Cleaning Instructions:

• Before Cleaning: Always disconnect the control unit from the blanket and unplug the blanket from the electrical outlet.
• Machine Washable: The Imetec 16803 electric blanket is machine washable.
• Washing Temperature: Wash at a maximum temperature of 30°C (86°F) on a gentle cycle.
• Detergent: Use a mild detergent. Do not use bleach.
• Rinsing: Rinse thoroughly.
• Drying: Do not tumble dry. Gently squeeze out excess water. Hang the blanket over a clothesline or shower rod to air dry completely. Ensure the blanket and all connectors are completely dry before reconnecting the control unit and plugging it in.
• Do Not Iron: Do not iron the electric blanket.
• Do Not Dry Clean: Do not dry clean, as solvents can damage the heating elements.

6. Storage

When not in use, especially during warmer months, store your electric blanket properly:

• Ensure the blanket is completely clean and dry before storing.
• Disconnect the control unit from the blanket.
• Gently fold or roll the blanket. Avoid sharp creases that could damage the internal wiring.
• Store the blanket in its original packaging or a breathable storage bag in a cool, dry place, away from direct sunlight and heavy objects that could compress it.

7. Troubleshooting

If you experience issues with your Imetec electric blanket, please refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact Imetec customer support.

8. Specifications

• Model: Imetec 16803
• Dimensions: 150 cm (Width) x 80 cm (Depth)
• Material: Polyester
• Care Instructions: Machine washable, maximum 30°C. Do not tumble dry, do not iron, do not dry clean.
• Power: Refer to the product label on the blanket or control unit for specific voltage and wattage information.

9. Warranty and Support

Imetec products are manufactured to high-quality standards and are covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Imetec website.

For technical assistance, troubleshooting beyond this manual, or to inquire about spare parts, please contact Imetec customer support. Contact details can typically be found on the product packaging or the official Imetec website.