Introduction
This manual provides essential information for the safe and efficient operation, maintenance, and care of your Jetson Bolt Folding Electric Ride-On Bike. Please read this manual thoroughly before your first ride and keep it for future reference. The Jetson Bolt is a compact and lightweight electric bike designed for commuting and casual riding, featuring a 350-watt motor, twist throttle, and pedal assist.
Safety Information
Your safety is paramount. Adhere to all safety guidelines to prevent injury or damage.
- Age Requirement: This product is intended for riders aged 13 years and older.
- Weight Limit: The maximum weight capacity for this bike is 265 lbs (120 kg).
- Protective Gear: Always wear a helmet, knee pads, elbow pads, and appropriate footwear (closed-toe shoes) when riding.
- UL Certification: The Jetson Bolt is UL-2849 certified, ensuring compliance with electrical safety standards.
- Riding Environment: Do not ride near motor vehicles. This bike is not designed for competition, jumping, or off-road use. Ride on appropriate surfaces.
- Charger Use: Only use the charger provided by Jetson for this specific model. Using an unapproved charger can be hazardous.
- Pre-Ride Check: Before each ride, ensure brakes are functioning, tires are properly inflated, and all components are securely fastened.
What's in the Box
Upon unpacking, verify that all the following components are included:
- Jetson Bolt Electric Bike
- Battery Charger
- Charging Cable
- User Manual (this document)
Setup
1. Unfolding the Bike
The Jetson Bolt is designed for easy portability. To unfold the bike:
- Place the folded bike on a flat, stable surface.
- Locate the folding latch mechanism on the main frame.
- Release the latch and carefully extend the frame until it locks into place. Ensure the locking mechanism is fully engaged.
- Raise the handlebar stem and secure it with its quick-release lever.
- Unfold the pedals if they are in the folded position.
2. Adjusting the Seat and Handlebars
Proper adjustment ensures comfort and control.
- Seat Height: Use the quick-release lever on the seat post to adjust the seat to a comfortable height where your feet can touch the ground while seated. Secure the lever firmly.
- Handlebar Height: The handlebar stem can be adjusted for optimal riding posture. Loosen the quick-release clamp, adjust to desired height, and re-secure.
3. Initial Charging
Before your first ride, fully charge the battery.
- Locate the charging port on the bike.
- Connect the charger to the bike's charging port, then plug the charger into a standard wall outlet.
- The indicator light on the charger will typically show red during charging and turn green when fully charged.
- Charging time is approximately up to 4 hours.
Operating Instructions
1. Powering On/Off
To power on the bike, press and hold the power button located on the handlebar controls. Repeat to power off.
2. Riding Modes
The Jetson Bolt offers multiple riding options:
- Twist Throttle: Gently twist the throttle on the right handlebar to engage the motor and accelerate. The bike can reach speeds of up to 15.5 mph using the throttle.
- Pedal Assist: Begin pedaling, and the motor will provide assistance, making pedaling easier. This mode extends the range significantly.
- Cruise Control: Engage cruise control for a consistent speed without continuously holding the throttle. Refer to the LED display for activation instructions.
- Traditional Biking: You can also ride the bike by pedaling without any motor assistance.
3. Braking
The bike is equipped with dual-disc hand brakes for reliable stopping power. Squeeze both brake levers simultaneously to slow down and stop. Apply brakes smoothly to maintain control.
4. Lights and Display
- LED Headlight and Taillight: The bike features an integrated LED headlight and a strobing red taillight for increased visibility, especially in low-light conditions. Activate them via the handlebar controls.
- LED Display: The handlebar-mounted LED display provides real-time information, including battery life, allowing you to monitor your charge at a glance.
Charging
To charge the Jetson Bolt's 36V, 6.0 lithium-ion battery:
- Ensure the bike is powered off.
- Open the charging port cover.
- Connect the charger cable to the port.
- Plug the charger into a standard electrical outlet (100-240V AC).
- The charger's indicator light will typically be red while charging and turn green when the battery is fully charged.
- A full charge takes approximately 4 hours. Do not overcharge the battery.
- Once charging is complete, disconnect the charger from the outlet first, then from the bike, and securely close the charging port cover.
Maintenance
Regular maintenance ensures optimal performance and longevity of your Jetson Bolt.
- Cleaning: Wipe the bike with a damp cloth after each ride. Avoid using high-pressure water jets directly on electrical components.
- Tire Pressure: Check tire pressure regularly. Maintain the recommended PSI (usually found on the tire sidewall) for efficient riding and to prevent flats.
- Brakes: Periodically inspect brake pads for wear and ensure brake levers provide firm and responsive stopping power. Adjust or replace as needed.
- Fasteners: Check all bolts, nuts, and quick-release levers to ensure they are securely tightened before each ride.
- Battery Care: Store the bike and battery in a cool, dry place. If storing for an extended period, charge the battery to about 50-70% and recharge every 1-2 months to prevent deep discharge.
- Professional Service: For complex repairs or adjustments, consult a qualified bike technician.
Troubleshooting
This section addresses common issues you might encounter with your Jetson Bolt.
| Problem | Possible Cause | Solution |
|---|---|---|
| Bike does not power on | Low or depleted battery Loose battery connection Power button not pressed correctly | Charge the battery fully Check battery connections Press and hold the power button firmly |
| Motor not engaging | Battery low Throttle issue Pedal assist sensor issue | Charge the battery Ensure throttle is twisted correctly Check for obstructions around pedals/sensor |
| Reduced range | Under-inflated tires Riding conditions (hills, headwind) Rider weight Battery degradation | Inflate tires to recommended PSI Adjust riding style Ensure rider weight is within limits Contact support if battery life significantly decreases |
| Brakes feel weak | Worn brake pads Loose brake cable Disc brake misalignment | Inspect and replace brake pads Adjust brake cable tension Consult a bike technician for adjustment |
If you encounter issues not listed here or require further assistance, please refer to the Support section.
Specifications
| Feature | Detail |
|---|---|
| Bike Type | Electric Bike |
| Model Name | Jetson Bolt |
| Model Number | JBLTP-BLK-OB |
| Motor | 350 Watt Hub Motor |
| Battery | 36V, 6.0 Lithium-Ion |
| Charging Time | Up to 4 hours |
| Top Speed | 15.5 mph (25 km/h) |
| Range (Throttle) | Up to 15 miles (24 km) |
| Range (Pedal Assist) | Up to 30 miles (48 km) |
| Climbing Angle | Up to 15 degrees |
| Weight Limit | 265 lbs (120 kg) |
| Product Weight | 41 lbs (18.6 kg) |
| Wheel Size | 14 Inches |
| Frame Material | Alloy Steel |
| Brake Style | Disc (Dual Disc Brake) |
| Throttle Type | Twist Grip |
| Folded Dimensions (L x W x H) | 46.5" x 19.3" x 23" (118 x 49 x 58 cm) |
| Unfolded Dimensions (L x W x H) | 46.5" x 19.3" x 38.6" (118 x 49 x 98 cm) |
| UL Certification | UL-2849 Certified |
Warranty
The Jetson Bolt Folding Electric Ride-On Bike comes with a limited warranty. For specific details regarding coverage, duration, and terms, please refer to the warranty information included with your purchase documentation or visit the official Jetson website.
Support
For further assistance, technical support, or to inquire about replacement parts, please contact Jetson customer service. Contact information can typically be found on the official Jetson website or in the packaging materials.
