NEC NP-PA804UL-W-41

Download PDF
Contents

User Manual

Sharp NEC Display NP-PA804UL-W-41 LCD Projector

Product Overview

The NEC NP-PA804UL-W-41 is an 8200-lumen LCD laser projector designed for professional installation in environments such as higher education and corporate settings. It features a sealed LCD cooling system for maintenance-free operation and quiet performance. This projector supports a wide range of digital inputs and offers flexible installation options with optional motorized lenses, roll-free capabilities, built-in edge blending, and stacking.

Sharp NEC Display NP-PA804UL-W-41 LCD Projector

Figure 1: Sharp NEC Display NP-PA804UL-W-41 LCD Projector. This image shows the white projector unit from a front-right perspective, highlighting the central lens, front ventilation grilles, and top control indicators.

Key Features

  • 4K Ready: Supports stunning 4K 60P content with NEC's proprietary video processing/scaling chip. HDR10 and BT.2020 signals are supported on all digital inputs.
  • Integrated Software Applications: Includes DisplayNote®, Crestron Roomview, AMX Beacon, Extron XTP, and PJ link for comprehensive interactivity and control.
  • High Brightness: 8200-lumen output enhances images for various applications.
  • TileMatrix: Enables 4Kx2K resolution by utilizing up to four projectors via HDBaseT Repeater.
  • ProAssist™ Software: Allows control and adjustment of the projected image from a computer via a network, facilitating multi-projector setups.
  • Sealed LCD Cooling System: Provides filter/maintenance-free operation and quiet performance.

Package Contents

Before beginning installation, please verify that all items listed below are included in your package:

  • 8200-Lumen Professional Installation Projector w/ 4K Support
  • Remote Control
  • Batteries for Remote Control
  • Power Cord
  • Cable Cover
  • Lens Hole Cap
  • User Manual (this document)
  • Product Registration Card
  • Lens Anti-Theft Screw
  • Security Sticker

Setup

1. Choosing a Location

Select a stable, level surface or a suitable ceiling mount location. Ensure adequate ventilation around the projector. Avoid direct sunlight or areas with excessive dust or humidity. The projector is designed for wall-mountable installations.

2. Connecting Power

  1. Connect the provided power cord to the projector's power input.
  2. Plug the other end of the power cord into a grounded electrical outlet.
  3. Ensure the power indicator light on the projector illuminates.

3. Connecting Input Sources

The projector supports various connectivity options including USB, Ethernet, and HDMI. Use appropriate cables to connect your desired source devices (e.g., computer, Blu-ray player, network switch) to the corresponding input ports on the projector.

  • HDMI: For high-definition video and audio.
  • HDBaseT: For single-cable transmission of uncompressed full HD digital video, audio, Ethernet, power, and control signals.
  • USB: For certain data transfer or control functions.
  • Ethernet: For network control and management.

4. Lens Installation (if applicable)

If using an optional motorized lens, carefully install it according to the lens-specific instructions. Ensure the lens is securely seated before operating the projector. The lens hole cap should be removed prior to installation.

Operating Instructions

1. Powering On/Off

  • To power on, press the Power button on the projector or the remote control.
  • To power off, press the Power button again. A confirmation message may appear; confirm to shut down.

2. Input Source Selection

Use the Input button on the remote control or the projector's control panel to cycle through available input sources (e.g., HDMI 1, HDMI 2, HDBaseT, etc.).

3. Image Adjustment

  • Focus: Adjust the lens focus using the remote control or manual lens controls until the image is sharp.
  • Zoom: Adjust the image size using the zoom function on the remote control or manual lens controls.
  • Lens Shift: Use the lens shift controls to vertically or horizontally adjust the image position without moving the projector.
  • Keystone Correction: If the image appears trapezoidal, use the keystone correction function in the projector's menu to square the image.
  • Picture Mode: Select from various picture modes (e.g., Standard, Cinema, Presentation) to optimize image quality for different content.

4. Network Control (ProAssist™)

The ProAssist™ software allows for advanced control and image adjustment over a network. Install the software on a computer connected to the same network as the projector. Refer to the ProAssist™ software manual for detailed instructions on configuration and use, especially for multi-projector setups using TileMatrix.

Maintenance

The NEC NP-PA804UL-W-41 projector features a sealed LCD cooling system, which significantly reduces maintenance requirements by eliminating the need for filter cleaning or replacement.

Cleaning the Projector

  • Exterior: Gently wipe the exterior of the projector with a soft, dry, lint-free cloth. For stubborn marks, slightly dampen the cloth with water and then wipe dry. Do not use abrasive cleaners or solvents.
  • Lens: Use a professional lens cleaning kit (lens brush, air blower, lens cleaning solution, and microfiber cloth) to clean the lens. Avoid touching the lens surface with your fingers.
  • Ventilation Openings: Ensure that the ventilation openings are not blocked. While the cooling system is sealed, keeping the exterior vents clear of dust can help maintain optimal airflow.

Storage

When not in use for extended periods, store the projector in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to cover the projector to protect it from dust.

Troubleshooting

ProblemPossible CauseSolution
No image displayed
  • Power cord not connected
  • Projector not powered on
  • Incorrect input source selected
  • Source device not powered on or connected
  • Check power cord connection.
  • Press the Power button.
  • Select the correct input source.
  • Ensure source device is on and connected properly.
Image is blurry
  • Lens out of focus
  • Projector too close/far from screen
  • Adjust the lens focus.
  • Adjust projector distance or use zoom/lens shift.
Image is trapezoidal
  • Projector not perpendicular to screen
  • Use keystone correction in the menu.
  • Reposition the projector.
No sound
  • Audio cable not connected (if applicable)
  • Volume too low
  • Source device audio settings
  • Ensure audio cables are connected or check HDMI/HDBaseT audio.
  • Increase volume on projector or source.
  • Check audio output settings on source device.

Specifications

Model NumberNP-PA804UL-W-41
BrandNEC
Product Dimensions14.1 x 28.9 x 24.8 inches
Item Weight63.3 pounds
Display Resolution1920 x 1200
Brightness8200 Lumens
Connectivity TechnologyUSB, Ethernet, HDMI, HDBaseT
Recommended UsesEducation, Business
ManufacturerSharp NEC Display Solutions Ltd.
First Available DateDecember 16, 2021

Warranty and Support

For warranty information and technical support, please refer to the official NEC Display Solutions website or contact their customer service directly. Keep your product registration card and proof of purchase for warranty claims.

You may also find additional support resources, drivers, and firmware updates on the manufacturer's official support pages.

For further assistance, please visit: NEC Display Solutions Support

© 2024 NEC Display Solutions. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.