1. Introduction
This manual provides detailed instructions for the safe and efficient operation of your U`King 72W 24LEDs RGB Stage Light Bar, Model ZQ06016. Please read this manual thoroughly before installation and use, and retain it for future reference. This device is designed for stage, event, and architectural lighting applications, offering versatile color mixing and control options.
Image 1.1: Two U`King 72W 24LEDs RGB Stage Light Bars. These linear light fixtures feature multiple RGB LEDs capable of producing a wide spectrum of colors for various lighting effects.
2. Safety Information
To ensure safe operation, observe the following precautions:
- Power Supply: Connect the unit only to a grounded power outlet with the specified voltage range (AC100V-240V).
- Ventilation: Ensure adequate ventilation around the fixture. Do not block ventilation openings.
- Moisture: Do not expose the unit to rain or moisture. Avoid operating in damp environments.
- Temperature: Do not operate the unit in extremely high or low temperatures.
- Mounting: Always secure the fixture properly using appropriate mounting hardware. Ensure the mounting surface can support the weight of the fixture.
- Servicing: Refer all servicing to qualified personnel. Do not attempt to repair the unit yourself.
- Direct Eye Exposure: Avoid direct eye exposure to the light source, as it can be harmful.
3. Setup
3.1 Unpacking
Carefully remove the light bar and all accessories from the packaging. Verify that all components listed in the 'What's in the Box' section are present and undamaged. Report any damage to your supplier immediately.
3.2 Mounting
The U`King Stage Light Bar can be mounted on a wall, truss, or placed on a flat surface using the included mounting brackets. Ensure the mounting location is stable and secure.
- Attach the mounting brackets to the light bar using the provided screws and washers.
- Secure the light bar to your desired surface (wall, truss, etc.) using appropriate fasteners (not included). Ensure the fixture is balanced and cannot vibrate loose.
- Adjust the angle of the light bar as needed using the bracket's pivot points.
3.3 Connections
Connect the power cable to the 'POWER IN' port on the light bar and then to a suitable AC100V-240V power outlet. For DMX control, connect a DMX cable from your DMX controller to the 'DMX IN' port. For daisy-chaining multiple units, connect a DMX cable from the 'DMX OUT' of the first unit to the 'DMX IN' of the next unit.
Image 3.1: Product overview showing dimensions, power plug, DMX input/output, and mounting accessories. The light bar measures approximately 40 inches in length.
4. Operating Instructions
The U`King Stage Light Bar offers multiple control modes and features for diverse lighting applications.
4.1 Control Panel
The light bar features a 4-button menu with a digital display for easy navigation and setting adjustments. The buttons typically include: MENU, UP, DOWN, ENTER.
- MENU: Cycles through the main menu options.
- UP/DOWN: Navigates through options or adjusts parameter values.
- ENTER: Confirms the selected option or value.
4.2 Operating Modes
Select an operating mode using the control panel:
- DMX-512 Mode: Allows external control via a DMX controller. Set the DMX address using the menu.
- Automatic Operation: The light bar cycles through pre-programmed light shows.
- Color Change: Displays various color transitions.
- Sound Activation: The light effects respond to ambient sound. Sound sensitivity can be adjusted via the menu.
- Fade: Smooth transitions between colors.
- Static Color: Displays a single, constant color.
- Master-Slave Mode: Link multiple units where one acts as the master (controlling unit) and others as slaves (following the master's program).
- Dimming: 0-100% electronic dimming is available in various modes.
Image 4.1: The RGB LED Wash Light Bar showcasing its ability to produce a wide range of colors, including primary RGB, and mixed colors like purple and cyan.
4.3 Color Combinations and Beam Angle
The 24 LEDs are RGB 3-in-1, allowing for a powerful color combination. Basic RGB colors can be mixed to create additional colors such as amber, purple, cyan, and white. The fixture features a 40-degree beam angle, providing a wide spread for wall washing and stage effects.
Image 4.2: Visual representation of the 40-degree beam angle, illustrating how the light spreads widely from the fixture.
Image 4.3: Examples of the light bar in use, demonstrating its versatility for illuminating walls, stages, and event spaces with vibrant colors.
5. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your light bar.
- Cleaning: Periodically clean the lens and exterior casing with a soft, lint-free cloth. Do not use abrasive cleaners or solvents. Ensure the unit is powered off and disconnected before cleaning.
- Inspection: Regularly inspect power cables, DMX cables, and mounting hardware for any signs of wear or damage. Replace damaged components immediately.
- Storage: When not in use, store the light bar in a dry, dust-free environment, preferably in its original packaging or a protective case.
6. Troubleshooting
If you encounter issues with your U`King Stage Light Bar, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power supply; Faulty cable; Unit malfunction | Check power connection and outlet; Test with a different power cable; Contact support. |
| No DMX control | Incorrect DMX address; Faulty DMX cable; DMX controller issue; Master-slave conflict | Verify DMX address setting; Check DMX cable connections; Ensure DMX controller is functioning; Set unit to DMX mode. |
| Sound activation not responsive | Low sound sensitivity; Insufficient sound input | Adjust sound sensitivity via the menu; Ensure sound source is close to the unit's microphone. |
| Power cord disconnects easily | Loose connection; Worn cable/port | Ensure cable is fully inserted; Consider replacing the power cable if worn; Avoid pulling on the cable. |
7. Specifications
| Feature | Detail |
|---|---|
| Brand | U`King |
| Model Number | ZQ06016 |
| Light Source | 24 x 3W RGB (3-IN-1) LEDs |
| Wattage | 72 Watts |
| Voltage | AC100V-240V |
| Beam Angle | 40 Degrees |
| Control Modes | DMX-512, Auto, Color Change, Sound Activated, Fade, Static Color, Master-Slave |
| Dimming | 0-100% Electronic Dimming |
| Material | Metal Casing |
| Finish Type | Painted |
| Product Dimensions | 40"L x 2.5"W x 3.3"H (101.6cm L x 6.35cm W x 8.38cm H) |
| Mounting Type | Wall Mount (brackets included) |
| Included Components | Lights Kit (Light Bar, Power Cable, Mounting Brackets) |
8. Warranty and Support
U`King products are designed for reliability and performance. For warranty information, please refer to the terms and conditions provided at the time of purchase or contact your retailer. For technical support, troubleshooting assistance, or spare parts, please contact U`King customer service through the official website or your point of purchase. Please have your model number (ZQ06016) and purchase date available when contacting support.