1. Introduction and Overview
Thank you for choosing the BONSEN S3110 Micro Cut Paper Shredder. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new shredder. Designed for both home and office use, the S3110 offers high-security shredding for confidential documents.
Image: The BONSEN S3110 Micro Cut Paper Shredder, showcasing its compact design and auto-feed capability.
2. Important Safety Instructions
- Read all instructions before use.
- Keep hands, hair, and loose clothing away from the paper entry slot.
- Do not allow children or pets near the shredder.
- Unplug the shredder when not in use or before cleaning.
- Do not shred items other than those specified (paper, credit cards, small paper clips, staples). Avoid adhesive labels, continuous forms, or plastic sheets.
- Do not operate if the power cord is damaged.
- The shredder is equipped with safety features: it will automatically stop working if the waste bin is pulled out.
3. Setup
- Carefully remove the shredder from its packaging.
- Place the shredder on a flat, stable surface. The 360-degree universal wheels allow for easy movement.
- Ensure the waste bin is correctly inserted into the shredder body. The shredder will not operate if the bin is not properly seated.
- Plug the power cord into a standard electrical outlet.
4. Operating Instructions
Power On
Locate the power switch on the back of the shredder and turn it to the 'ON' position. The shredder is now ready for operation.
Shredding Modes
The BONSEN S3110 offers two distinct shredding modes:
4.1. Auto-Feed Mode
This mode is designed for shredding large quantities of paper efficiently.
- Capacity: Up to 120 sheets of paper (80g/m²) at once.
- Material: Only paper should be used in the auto-feed tray.
- Continuous Run Time: Up to 30 minutes.
- Operation: Place the stack of paper neatly into the auto-feed tray. The shredder will automatically feed and shred the documents.
Image: Automatic Feeding Inlet, capable of shredding up to 120 sheets of paper.
4.2. Manual Feed Mode
Use this mode for smaller batches or for shredding non-paper items.
- Capacity: Up to 12 sheets of paper (80g/m²) per pass.
- Material: Can shred paper, small paper clips, staples, and credit cards.
- Continuous Run Time: Up to 10 minutes.
- Operation: Insert items into the manual feed slot one at a time or within the specified sheet capacity.
Image: Manual Feeding Inlet, suitable for up to 12 sheets of paper, clips, staples, and credit cards.
4.3. Controls and Indicators
The shredder features a multi-function button panel with LED indicators for easy operation and status monitoring.
- REV (Reverse): Used to clear paper jams by reversing the shredding mechanism.
- AUTO (ON/OFF): Main power button and indicator for normal operation, overloading, or overheating.
- FWD (Forward): Forces the shredder to operate continuously forward, useful for clearing stubborn jams.
- LED Indicators: Provide visual alerts for standby, overheat, bin-full, overload, and door-open status.
Image: Multi-function Button with LED Indicator, showing REV, AUTO, and FWD controls.
4.4. Security Level
The BONSEN S3110 provides a high level of security for your shredded documents.
- Micro Cut: Shreds documents into tiny 5/32" x 15/32" (4 x 12 mm) pieces.
- Security Level: Meets P-4 standards, suitable for highly confidential information.
Image: Micro Cut & High Security, illustrating the small size of shredded particles.
4.5. Product Demonstration Video
Watch this video for a visual guide on operating your BONSEN shredder, including auto-feed and manual feed functions, and safety features.
Video: BONSEN 100-Sheet Autofeed Paper Shredder (Note: This model supports up to 120 sheets in auto-feed mode). Demonstrates power-on, auto-feed, manual feed for various items, security level, and wastebasket features.
5. Maintenance
5.1. Emptying the Waste Bin
The shredder features a 6-gallon pullout bin for shredded material. When the bin-full indicator illuminates, it's time to empty it.
- Pull out the waste bin. The shredder will automatically stop operating for safety.
- Dispose of the shredded material.
- Slide the bin back into place until it clicks securely.
Image: Large Capacity and Easy to Move, showing the 6-gallon pullout bin and product dimensions.
5.2. Oiling the Shredder Blades
Regular oiling of the shredder blades is recommended to maintain optimal performance and extend the life of your shredder. Use shredder oil (not included) as per the instructions on the oil product. Typically, oil after every 30 minutes of continuous shredding or when performance decreases.
6. Troubleshooting
Refer to the LED indicators and the following guide for common issues:
| Problem | Indicator | Solution |
|---|---|---|
| Paper Jam (Auto-Feed) | Auto button in red and blue flashing | Press REV button to pull out jammed papers. Separate and re-feed tidy paper to auto-feed, or wrinkle paper to manual-feed. |
| Serious Paper Jam (Auto-Feed) | Auto button in red and blue flashing | Open the Auto-feed Connecting plate lock. Take out jammed papers. Feed jam paper scraps into manual-feed to shred. Move Auto-feed cleaning button to let paper scraps into basket. |
| Paper is out of order (Auto-Feed) | N/A | Press REV button and take out papers. Keep paper in order. Re-feed tidy paper to auto-feed, or wrinkle paper to manual-feed. |
| Overload | Auto button in red and blue flashing | The shredder stops. Remove excess papers. Separate jam paper to re-feed. Re-feed tidy paper to auto-feed, or wrinkle paper to manual-feed. |
| Overheat | Auto button in red | The shredder stops. Allow it to cool down for approximately 60 minutes. |
| Bin Full | Auto button in blue flashing | Clean up the paper scraps in the waste bin. |
Troubleshooting Visual Aids
Image: Steps to resolve an Auto-Feed Jam.
Image: Steps to resolve an Auto-Feed Serious Jam.
Image: Solutions for common issues including paper out of order, overload, overheat, and bin full.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | S3110 |
| Product Dimensions (L x W x H) | 16.26 x 12.44 x 21.89 inches (41.3 x 31.6 x 55.6 cm) |
| Item Weight | 22.5 pounds (10.2 kg) |
| Auto-Feed Capacity | 120 sheets (paper only) |
| Manual Feed Capacity | 12 sheets (paper, clips, staples, credit cards) |
| Cut Type | Micro Cut |
| Shred Size | 5/32" x 15/32" (4 x 12 mm) |
| Security Level | P-4 |
| Auto-Feed Continuous Run Time | 30 minutes |
| Manual Feed Continuous Run Time | 10 minutes |
| Shredding Speed | 71 inches/minute |
| Waste Bin Capacity | 6 Gallons |
| Mobility | 360-degree universal wheels |
8. Warranty and Support
The BONSEN S3110 auto-feed shredder comes with a 1-year professional customer service warranty. For support, please refer to the contact information provided on your product packaging or visit the official BONSEN website.
