JAXPETY Modern Wood Nightstand with Drawer (Set of 2)

Introduction

Thank you for choosing the JAXPETY Modern Wood Nightstand with Drawer. This manual provides detailed instructions for the safe assembly, operation, and maintenance of your new furniture. Please read this manual thoroughly before beginning assembly and retain it for future reference.

Image: Two JAXPETY Modern Wood Nightstands, one with an open drawer, in a modern living room setting.

Safety Information

• Read all instructions carefully before assembly.
• Keep all small parts and packaging materials away from children and pets.
• Assemble on a soft, clean surface to prevent scratches.
• Ensure all connections are securely tightened before use. Periodically check and re-tighten as necessary.
• Do not exceed the maximum weight capacity of 110 pounds (50 kg) for the tabletop.
• Do not stand or climb on the nightstand.
• Use anti-tip hardware if provided, especially if placing heavy items on top or if children are present.

Package Contents

Verify that all components listed below are present before beginning assembly. If any parts are missing or damaged, please contact customer support.

• Nightstand Top Panel (x2)
• Side Panels (x4)
• Bottom Panel (x2)
• Back Panel (x2)
• Drawer Front (x2)
• Drawer Side Panels (x4)
• Drawer Back Panel (x2)
• Drawer Bottom Panel (x2)
• Solid Wood Legs (x8)
• Leg Mounting Plates (x8)
• Felt Pads (x8)
• Hardware Pack (screws, cam locks, dowels, drawer slides, handle)
• Assembly Tool (Allen wrench, if applicable)

Setup and Assembly Instructions

Assembly typically requires a hammer and screwdriver (not included). Follow these steps carefully for each nightstand.

1. Prepare Components: Unpack all parts and lay them out on a clean, soft surface. Identify each component using the provided parts list.
2. Attach Leg Mounting Plates: Secure the metal leg mounting plates to the bottom panel of the nightstand using the provided screws. Ensure they are aligned correctly with the pre-drilled holes.
   

   Image: Detail of leg attachment mechanism with a wooden leg and metal plate.
3. Attach Legs: Screw the solid wood legs into the attached mounting plates. Hand-tighten until secure.
   

   Image: Close-up of the leg with a felt pad and the drawer mechanism.

4. Assemble Nightstand Frame: Connect the side panels, bottom panel, and top panel using the provided hardware (dowels, cam locks, screws). Follow the diagrams in your physical manual for specific orientation.
5. Install Drawer Slides: Attach the drawer slides to the inner side panels of the nightstand frame and to the drawer side panels according to the instructions. Ensure they are level and aligned for smooth operation.
6. Assemble Drawer: Connect the drawer side panels, back panel, and front panel. Slide the drawer bottom panel into the grooves. Attach the handle to the drawer front.
7. Insert Drawer: Carefully slide the assembled drawer into the nightstand frame, aligning the drawer slides.
8. Attach Back Panel: Secure the back panel to the rear of the nightstand frame using small nails or screws.
9. Apply Felt Pads: Attach the felt pads to the bottom of each leg to protect your floors.
10. Final Check: Ensure all screws and connections are tight. Place the nightstand in its desired location.

Operating Instructions

• Drawer Usage: The nightstand features a smoothly pull-out drawer for storage. To open, gently pull the handle. To close, push until it is fully seated. Avoid forcing the drawer.
• Weight Capacity: The tabletop is designed to hold up to 110 pounds (50 kg). Distribute weight evenly. Avoid placing excessively heavy items on the open shelf or inside the drawer to prevent damage or instability.
• Placement: Position the nightstand on a flat, stable surface to ensure stability and prevent wobbling.

Maintenance

• Cleaning: The surface is waterproof and wear-resistant, making it easy to clean. Wipe with a soft, damp cloth using only water. Avoid harsh chemicals or abrasive cleaners, which can damage the finish.
• Dusting: Regularly dust with a dry, soft cloth.
• Spills: Wipe up spills immediately to prevent staining, especially on the white surface.
• Hardware Check: Periodically check all screws and connections to ensure they remain tight. Re-tighten as needed to maintain structural integrity.
• Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause fading or discoloration.

Troubleshooting

Specifications

Image: Dimensional diagram and maximum weight capacity of the nightstand.

• Brand: JAXPETY
• Model Name: Modern
• Product Dimensions (D x W x H): 15.75" x 11.75" x 23.5"
• Maximum Weight Recommendation: 110 Pounds (50 kg)
• Color: White
• Material Type: P2 + Pinewood
• Frame Material Type: Pine Wood
• Top Material Type: P2 + Pinewood
• Base Material: Pine Wood
• Handle Material: Wood
• Number of Drawers: 1 per unit
• Number of Items: 2 (Set)
• Item Weight: 38 Pounds (for the set)
• Tools Recommended For Assembly: Hammer, Screw Driver
• Indoor/Outdoor Usage: Indoor
• Leg Style: Tapered Leg

Warranty and Support

For specific warranty information regarding your JAXPETY Modern Wood Nightstand, please refer to the documentation included with your purchase or contact JAXPETY customer service directly. Protection plans may be available for extended coverage.

For technical support, missing parts, or any questions regarding this product, please visit the official JAXPETY website or contact their customer support team. Contact details are typically found on the product packaging or the brand's official online presence.

JAXPETY Official Store: Visit JAXPETY Store on Amazon