ELITUN KJ130

Download PDF
Contents

ELITUN KJ130 Replacement Filter Air Purifier User Manual

Model: KJ130 | Brand: ELITUN

1. Product Overview

The ELITUN KJ130 Replacement Filter is specifically designed for the ELITUN KJ130 air purifier to ensure optimal performance and continuous air purification. This filter features a 3-in-1 filtration system to effectively clean the air in your environment.

Diagram illustrating the three stages of filtration: Pre-Filter, H13 True HEPA Filter, and Cold Catalyst Filter.

Figure 1: 3-Stage Filtration System
This diagram illustrates the three distinct layers of the ELITUN KJ130 replacement filter. The first layer is the Pre-Filter, designed to capture larger particles. The second layer is the H13 True HEPA Filter, which targets fine airborne particles. The third layer is the Cold Catalyst Filter, which helps in odor removal.

Key Features:

  • Efficiency 3-in-1 Replacement Filter: Exclusively designed for the ELITUN KJ130 air purifier to maintain its best performance.
  • Pre-Filter: Captures large air particles such as dust, hair, lint, and pet dander.
  • H13 True HEPA Filter: Effectively reduces up to 99.97% of airborne fine particles as small as 0.1 microns in diameter.
  • Cold Catalyst Filter: Helps to remove household odors, including pet odors, cooking odors, and cigarette smoke.

2. Installation and Replacement

To ensure optimal air purification, it is essential to properly install and replace the ELITUN KJ130 filter. The new filter is sealed to protect its service life. Always remove the plastic packaging from the new filter before installation.

Four-step visual guide on how to replace the air purifier filter.

Figure 2: Filter Replacement Steps
This image provides a step-by-step visual guide for replacing the filter in the ELITUN KJ130 air purifier. It shows: 1. Flipping the unit upside down and rotating the bottom cover counterclockwise. 2. Removing the old filter and replacing it with a new one (after removing plastic packaging). 3. Rotating the bottom cover clockwise until locked. 4. Pressing and holding the filter replacement button for 5 seconds to reset the setting.

Step-by-Step Replacement Guide:

  1. Step 1: Prepare the Air Purifier. Flip the air purifier upside down.
  2. Step 2: Open the Filter Compartment. Rotate the bottom cover counterclockwise to unlock and remove it.
  3. Step 3: Remove Old Filter. If the filter is dirty, carefully remove the old filter from the compartment.
  4. Step 4: Install New Filter. Insert the new ELITUN KJ130 replacement filter into the air purifier. Ensure you have removed all plastic packaging from the new filter before insertion.
  5. Step 5: Close the Compartment. Place the bottom cover back on and rotate it clockwise until it is securely locked.
  6. Step 6: Reset Filter Indicator. After replacing the filter, press and hold the filter replacement button on the air purifier's control panel for 5 seconds to reset the filter life indicator.

3. Maintenance and Care

Regular maintenance of your ELITUN KJ130 replacement filter is crucial for maintaining air quality and extending the life of your air purifier. The filter's effectiveness diminishes over time as it collects pollutants.

Filter Replacement Frequency:

It is recommended to replace the ELITUN KJ130 filter every 6-8 months. This recommendation is based on an average usage of 8 hours per day. Actual replacement frequency may vary depending on air quality, usage intensity, and environmental factors (e.g., presence of pets, smokers, or high pollution levels).

Side-by-side comparison of a new, clean air filter and a dirty, used air filter.

Figure 3: Filter Condition Comparison
This image visually compares a new, clean ELITUN KJ130 filter on the left with a filter that has been used for several months on the right. The used filter appears significantly darker and visibly soiled, demonstrating the accumulation of airborne particles and the need for replacement.

Signs of a Clogged Filter:

  • Decreased airflow from the air purifier.
  • Increased noise from the air purifier.
  • Persistent or returning odors in the room.
  • Visible dirt or discoloration on the filter surface.

4. Specifications

AttributeDetail
BrandELITUN
Model CompatibilityELITUN KJ130 Air Purifier
Filter Type3-in-1 (Pre-Filter, H13 True HEPA, Cold Catalyst)
HEPA Efficiency99.97% of particles as small as 0.1 microns
MaterialPlastic (Filter frame and components)
Recommended ReplacementEvery 6-8 months (based on 8 hours/day usage)
ASINB09NN4SXQJ
UPC664918960780

5. Troubleshooting

If you experience issues with your ELITUN KJ130 air purifier after filter replacement, consider the following common troubleshooting steps:

  • Air Purifier Not Turning On: Ensure the filter compartment cover is securely locked. The air purifier may have a safety switch that prevents operation if the cover is not properly closed.
  • Reduced Airflow or Odors Persist:
    • Verify that the plastic packaging has been completely removed from the new filter.
    • Check if the filter is installed correctly, facing the right direction if applicable (though this filter appears symmetrical).
    • Confirm that the filter replacement indicator has been reset (refer to Section 2, Step 6).
    • Consider if the filter needs replacement sooner than recommended due to unusually high levels of pollutants in the environment.
  • Unusual Noises: Ensure the filter is seated correctly and not loose within its compartment.

For further assistance, please refer to the main ELITUN KJ130 air purifier user manual or contact ELITUN customer support.

© 2024 ELITUN. All rights reserved.

For more information, visit the official ELITUN website or contact customer support.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.