Vonets VAP11S-5G Mini WiFi Bridge User Manual

1. Introduction

The Vonets VAP11S-5G is a versatile industrial-grade Mini WiFi Bridge, Repeater, and Router designed for stable and reliable wireless networking. It supports the WiFi 802.11a/n/ac protocol with a 900Mbps WiFi rate, enabling both WiFi-to-wired and wired-to-WiFi functionalities. This device is suitable for various applications including surveillance, DVR, IP cameras, medical equipment, IoT devices, video transmission, industrial PLC, and more.

This manual provides detailed instructions for setting up, operating, and maintaining your VAP11S-5G device.

2. Safety Information

• Ensure the device is powered by a DC5-24V power supply (typical 5V/2A).
• Avoid exposing the device to extreme temperatures or humidity.
• Do not disassemble or attempt to repair the device yourself. Refer to qualified personnel for service.
• Keep the device away from water and other liquids.
• Ensure proper ventilation to prevent overheating.

3. Package Contents

Please check the package for the following items:

• Vonets VAP11S-5G Mini WiFi Bridge
• 2 x 5GHz Antennas
• USB Power Cable
• Ethernet Cable
• Industrial DC Connector
• Fixed Kit
• Quick Setting Guide

4. Product Overview

The Vonets VAP11S-5G features a compact design with two external antennas for enhanced signal reception. It includes two RJ45 ports for wired connections and can be powered via USB or DC input.

This image displays the Vonets VAP11S-5G device, a compact white unit with two external antennas. It is shown connected to a USB power cable and an Ethernet cable, highlighting its connectivity options.

4.1. Components and Indicators

This diagram illustrates the key components of the VAP11S-5G. It shows the LAN/WAN port, USB (5V-2A) power input, DC (5V-24V) power input, and a reset button. LED indicators are also labeled: Green Light for 5G WiFi connection status, Yellow Light for Ethernet cable connection status, and Blue Light for System Status.

• LAN/WAN Port: For Ethernet cable connection.
• USB (5V-2A): Primary power input option.
• DC (5V-24V): Alternative power input option, suitable for industrial applications.
• Reset Button: Used to restore factory settings.
• LED Indicators:
  • Green Light: Indicates 5G WiFi connection status.
  • Yellow Light: Indicates Ethernet cable connection status.
  • Blue Light: Indicates System Status.

5. Setup

5.1. Hardware Installation

1. Install Antennas: Screw the two 5GHz antennas onto the device. For optimal WiFi signal, ensure the antennas are positioned at a 90-degree angle.
2. Power the Device: Connect the device to a power source using either the USB cable (5V/2A recommended) or the DC connector (5V-24V).
3. Wired Connection: Connect the device to your computer or network device using an Ethernet cable.

This image illustrates the flexible power options for the VAP11S-5G, including USB power supply (5V 2A recommended), industrial wiring head support, and standard DC power supply (supporting wide voltage DC5-24V).

5.2. Initial Configuration (Computer)

To configure the VAP11S-5G using a computer, follow these steps:

1. Ensure the device is powered on and connected to your computer via Ethernet.
2. Open a web browser on your computer.
3. Enter the configured domain http://vonets.cfg or the IP address 192.168.254.254 into the address bar and press Enter.
4. Log in using the default User ID and password, both typically "admin".
5. Navigate to the WiFi Hotspots section and click "Scan Hotspots" to find available networks.
6. Select your desired WiFi network (hotspot) from the list and click "Next".
7. Enter the password for your chosen WiFi hotspot.
8. Click "Apply" and then "Reboot" to save the settings and restart the device. The device will take approximately 1 minute to reboot. Wait until the LED lights flash normally.

5.3. Initial Configuration (Smartphone)

You can also configure the VAP11S-5G using a smartphone:

1. Power on the VAP11S-5G device.
2. On your smartphone, go to WiFi settings and connect to the device's default SSID (e.g., VONETS_5G_XXXXX). The default password is 12345678.
3. Open a web browser on your smartphone.
4. Enter http://vonets.cfg or 192.168.254.254 into the address bar.
5. Log in with the default User ID and password ("admin").
6. Scan for WiFi hotspots and select your desired network.
7. Enter the password for your WiFi network.
8. Apply the settings and reboot the device.
9. After reboot, connect your smartphone to the newly configured WiFi network (the SSID will be the source WiFi SSID_5G_**). The password will be the same as your source WiFi's password.

6. Operating Modes

The VAP11S-5G supports multiple operating modes to suit various networking needs:

This image displays three primary application modes: Repeater/Bridge, AP (Access Point), and Router. Each diagram shows how the VAP11S-5G (VAP11AC with fan version) integrates into different network setups to expand WiFi coverage, convert WiFi to wired, or provide internet access.

6.1. Repeater/Bridge Application

This mode expands an existing WiFi network, converting WiFi to an RJ45 network cable. It allows devices like desktop computers, printers, surveillance cameras, and attendance machines to connect to the network wirelessly.

6.2. AP (Access Point) Application

In AP mode, the device functions as a wireless access point for a wired network. It is suitable for scenarios where a network cable is connected to the computer, allowing other wireless devices to access the internet without dialing.

6.3. Router Mode

This mode implements a wireless access function for dial-up access, suitable for scenes that require such access.

7. Advanced Features

This image presents a grid detailing several advanced features of the VAP11S-5G, including automatic overvoltage protection, IP/MAC layer transparent transmission, SSA signal strength detection, WiFi motion detection, 5GHz band transmit power, manual WiFi hotspot control, wide operating temperature range, batch configuration, and support for multiple wireless terminal devices.

• Automatic Overvoltage Protection: Features two-level automatic overvoltage protection with an upper limit of 27V, enhancing durability for industrial applications.
• IP/MAC Layer Transparent Transmission: Compatible with various surveillance systems (e.g., GoPro, Hikvision, Cisco WiFi) for diverse application needs.
• SSA Signal Strength Detection Reporting: Achieves WiFi motion detection and positioning for specialized applications.
• WiFi Motion Detection: Suitable for dynamic WiFi access in intelligent robots.
• 5GHz Band 19/23dBm Transmit Power: Offers adjustable transmit power for optimal performance, with a measured 500m barrier-free transmission range.
• WiFi Hotspots Can Be Manually Turned Off: Provides flexibility for bridge or repeater applications.
• Wide Operating Temperature: Supports working environments from -40°C to 50°C, making it suitable for industrial use.
• Batch Configuration: Facilitates easier setup for multiple devices in industrial applications.
• Wireless Terminal Equipment X20: Supports simultaneous connection of more than 20 WiFi terminal devices.

8. Maintenance

• Software Updates: The device's software is continuously optimized. You can upgrade the software version online at any time to ensure optimal functionality. Refer to the official Vonets website for the latest firmware and instructions.
• Cleaning: Use a soft, dry cloth to clean the device. Do not use liquid cleaners or aerosols.
• Heat Dissipation: The device includes a smart automatic cooling fan that activates after 5-10 minutes of normal operation to ensure stable performance. Ensure the vents are not obstructed.

9. Troubleshooting

• Device Not Powering On: Ensure the power cable is securely connected and the power source is active. Try a different USB port or DC adapter if available.
• Cannot Access Web Interface:
  • Verify the Ethernet cable connection between the device and your computer.
  • Ensure your computer's network adapter is set to obtain an IP address automatically (DHCP).
  • Double-check the URL (http://vonets.cfg) or IP address (192.168.254.254).
  • Clear your browser's cache or try a different browser.
• No Internet Connection After Configuration:
  • Confirm that the WiFi hotspot password entered during configuration is correct.
  • Ensure the source WiFi network is active and providing internet access.
  • Reboot the VAP11S-5G device and your main router.
• Unstable Connection / Frequent Disconnections:
  • Check the signal strength of the source WiFi network. If it's less than 50%, the network may be unstable.
  • Adjust the angle of the VAP11S-5G antennas to optimize signal reception.
  • Ensure the device is not placed near sources of interference (e.g., microwaves, cordless phones).
  • Consider updating the device firmware to the latest version.
• LED Lights Not Functioning as Expected: Refer to the "Components and Indicators" section for expected LED behavior. If lights are not as described, try rebooting the device.

10. Specifications

11. Warranty

This product comes with a one-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

12. Support

For further assistance or technical support, please contact Vonets customer service:

• Email: support@vonets.com
• Website: Visit the Vonets Store on Amazon for product information and updates.