VONETS VAP11G-300 User Manual

1. Product Overview

The VONETS VAP11G-300 is a compact 2.4G Mini WiFi Bridge/Repeater/Signal Booster designed to provide wireless internet access to Ethernet-enabled devices or extend existing Wi-Fi signals. It features a single RJ45 port and is powered via DC or USB.

Figure 1: VONETS VAP11G-300 Mini WiFi Bridge. This image shows the compact blue device with its integrated USB power cable and RJ45 Ethernet cable.

Key Features:

• 2025 New Upgrade: Features a new process design for super stability.
• Multi-Mode Support: Functions as a WiFi Smart Bridge (WiFi to wired or wired to WiFi), WiFi Smart Repeater (enhances and extends WiFi signal), and WiFi Smart Access Point (provides wireless access for other devices).
• Wireless/Wired Parameters: Supports 2.4GHz WiFi at 300Mbps (802.11b/g/n protocol). Point-to-point transmission distance up to 80m without obstacles.
• Versatile Application: Ideal for electronic scales, DVRs, IP cameras, medical devices, IoT devices, video transmission, industrial PLCs, PS3, printers, and robots.
• Flexible Power: Powered by DC 5V-15V (typical 5V/1A) via a 30cm power cable with optional DC or USB port.

2. Setup Guide

Follow these steps to set up your VONETS VAP11G-300 device. Ensure you have a stable power source and an Ethernet-enabled device for initial configuration.

2.1. Initial Connection and Power-On

1. Unpack the Device: Carefully remove the VONETS VAP11G-300 from its packaging. The package typically includes the VAP11G-300 device, an Ethernet cable, and a power cable (USB or DC option).
2. Identify MAC Address: Locate the MAC address on the back of the device. This may be needed for certain configurations.
3. Connect Power: Connect the device to a 5V/2A power supply using the provided USB or DC cable. A typical 5V/2A power supply is recommended for stable operation. Observe the LED indicators for power confirmation.

Figure 2: Product details and connection points. This image highlights the USB and DC power inputs, LAN port, hotspot connection status light, Ethernet cable connection light, and reset button, along with key specifications.

Figure 3: Multifunctional Power Line. This image shows the power cable with both DC and USB options, allowing flexible power input for the device.

2.2. Configuration via Computer

1. Connect to Computer: Connect the VAP11G-300 to your computer's Ethernet port using an Ethernet cable.
2. Access Configuration Page: Open a web browser and enter the configured domain http://vonets.cfg or the IP address 192.168.254.254.
3. Login: Enter the default User ID and password, which are both "admin". Click "Login".
4. Scan Hotspots: Navigate to the "Scan Hotspots" section. The device will search for available WiFi networks.
5. Select WiFi Hotspot: Choose your desired WiFi hotspot from the list and click "Next".
6. Enter Password: Input the password for the selected WiFi hotspot.
7. Apply and Reboot: Click "Apply" to save the settings, then click "Reboot" or power off the device. The device will take approximately 1 minute to reboot. Wait until the LED light flashes normally, indicating successful configuration.

2.3. Configuration via Smartphone

1. Find MAC Address: Locate the MAC address on the back of your VAP11G-300 device.
2. Connect to Device's WiFi: On your smartphone, connect to the WiFi SSID of the VAP11G-300. The SSID format is typically VONETS_2.4G_XXXX (where XXXX is part of the MAC address). The default password is 12345678.
3. Access Configuration Page: Open a web browser on your smartphone and enter the configured domain http://vonets.cfg or the IP address 192.168.254.254.
4. Login: Enter the default User ID and password, both are "admin". Tap "Login".
5. Scan Hotspots: Navigate to the "Scan Hotspots" section. The device will search for available WiFi networks.
6. Select WiFi Hotspot: Choose your desired WiFi hotspot from the list and tap "Next".
7. Enter Password: Input the password for the selected WiFi hotspot.
8. Apply and Reboot: Tap "Apply" to save the settings, then tap "Reboot" or power off the device. The device will take approximately 1 minute to reboot. Wait until the LED light flashes normally, indicating successful configuration.

3. Operating Modes

The VONETS VAP11G-300 supports three primary operating modes to suit various networking needs:

3.1. WiFi Smart Bridge Mode

In Bridge mode, the VAP11G-300 converts a WiFi signal into an Ethernet connection, allowing wired devices to access the internet wirelessly. It can also convert a wired connection to WiFi.

• Function: Connects Ethernet-only devices (e.g., DVRs, IP cameras, smart TVs) to a wireless network.
• Application: Ideal for scenarios where a device lacks built-in Wi-Fi or requires a stable wired connection over a wireless link.

Figure 4: Application Mode Introduction - AP Mode. This diagram illustrates how the VAP11G-300 functions in AP mode, providing wireless access from a wired network.

3.2. WiFi Smart Repeater Mode

Repeater mode extends the range of an existing WiFi network, enhancing signal strength and coverage in areas with weak signals. It supports automatic hotspot scanning and memory functions.

• Function: Boosts and extends the reach of your current Wi-Fi network.
• Application: Useful for large homes, offices, or areas with Wi-Fi dead zones.

Figure 5: Application Mode Introduction - Repeater Mode. This diagram shows the VAP11G-300 extending the range of a router's Wi-Fi signal.

3.3. WiFi Smart Access Point (AP) Mode

In AP mode, the VAP11G-300 acts as a wireless access point, allowing other wireless devices to connect to a wired network.

• Function: Creates a new wireless network from a wired Ethernet connection.
• Application: Suitable for setting up a small Wi-Fi hotspot in a specific area.

4. Maintenance

Proper maintenance ensures the longevity and optimal performance of your VONETS VAP11G-300.

4.1. Cleaning

• Exterior: Use a soft, dry cloth to wipe the exterior of the device. Avoid using liquid cleaners or abrasive materials.
• Ports: Ensure the RJ45 and USB ports are free from dust and debris. Use compressed air if necessary, but avoid inserting objects into the ports.

4.2. Firmware Updates

Regularly check for firmware updates on the official Vonets website (www.vonets.com). Firmware updates can improve performance, add new features, and fix bugs.

• Procedure: Follow the instructions provided on the Vonets website for downloading and installing firmware updates. It is crucial to follow these steps precisely to avoid damaging the device.
• Caution: Do not interrupt the power supply during a firmware update.

4.3. Storage

If storing the device for an extended period, disconnect it from power and store it in a cool, dry place away from direct sunlight and extreme temperatures.

5. Troubleshooting

This section provides solutions to common issues you might encounter with your VONETS VAP11G-300.

5.1. Factory Reset

If you encounter persistent issues or forget your login credentials, you can perform a factory reset:

1. Power On: Ensure the VAP11G-300 is powered on.
2. Locate Reset Button: Find the small reset button on the device (often recessed).
3. Press and Hold: Use a paperclip or a similar pointed object to press and hold the reset button for approximately 5-8 seconds until the LED indicators change or flash rapidly.
4. Release: Release the button. The device will reboot with factory default settings.

6. Technical Specifications

7. Warranty and Support

For any questions or assistance with your VONETS VAP11G-300, please contact our support team.

• Email Support: htxus2021@163.com
• Official Website: Visit the Vonets website for additional resources, FAQs, and the latest firmware updates: www.vonets.com

Please refer to your purchase documentation for specific warranty details and terms.