Introduction
Thank you for purchasing the Enchen Hunter Adjustable Beard and Hair Trimmer. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your device. Please read these instructions thoroughly before first use and retain them for future reference.
Safety Information
- Keep the appliance dry. Do not immerse the trimmer in water or use it in a shower or bath unless specifically designed for wet use and indicated as such. This model is waterproof, allowing for easy cleaning under running water.
- Do not use the appliance if it is damaged. Inspect the trimmer and charging cable for any signs of damage before each use.
- Keep out of reach of children. This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction.
- Use only the charging cable provided or a compatible USB charger.
- Avoid extreme temperatures. Do not expose the trimmer to direct sunlight or store it in very hot or cold environments.
- Do not attempt to repair the appliance yourself. Contact qualified service personnel for repairs.
- Ensure the trimmer is switched off before cleaning or performing maintenance.
Package Contents
Please check the package for the following items:
- Enchen Hunter Hair Trimmer
- USB Charging Cable
- Cleaning Brush
- User Manual
Product Overview
The Enchen Hunter trimmer features a sleek design with an adjustable blade for various cutting lengths. It is equipped with a powerful motor and durable blades for efficient trimming.
Image: General view of the Enchen Hunter Hair Trimmer, showcasing its ergonomic design and main components.
Key Features:
- Fine-Tuning Blade: Adjustable cutting length from 0.8mm to 2mm.
- Ultra-Thin Cutter Head: Designed for skin safety and precision.
- Powerful Rotary Motor: 8000r/m high-speed motor for efficient trimming.
- USB Universal Charging: Convenient charging via USB.
- Titanium & Ceramic Blades: Combination of ceramic for sharpness and titanium for durability.
Image: Close-up view of the trimmer's ultra-thin cutter head, highlighting its precision gap for skin safety.
Image: Diagram illustrating the composition of the trimmer blades, featuring both ceramic for sharpness and titanium for toughness.
Setup
- Unpack: Carefully remove all components from the packaging.
- Inspect: Check the trimmer and accessories for any visible damage.
- Initial Charge: Before first use, fully charge the trimmer. Refer to the 'Charging' section for detailed instructions.
Charging
The Enchen Hunter trimmer is equipped with an 800mAh Lithium Ion battery, providing approximately 120 minutes of run-time on a full charge. It uses a universal USB charging port.
- Ensure the trimmer is switched off.
- Insert the small end of the USB charging cable into the charging port at the bottom of the trimmer.
- Connect the larger end of the USB cable to a compatible USB power source (e.g., power bank, laptop, USB wall adapter).
- The charging indicator light will illuminate to show that the trimmer is charging.
- Allow the trimmer to charge fully before its first use. A full charge typically takes a few hours.
- Once fully charged, disconnect the charging cable.
Image: Close-up of the trimmer's USB charging port, demonstrating how to connect the universal USB cable for charging.
Operating Instructions
Turning On/Off:
- To turn on the trimmer, press the power button located on the front of the device.
- To turn off the trimmer, press the power button again.
Adjusting Cutting Length:
The Enchen Hunter features a fine-tuning blade that allows adjustment of cutting length from 0.8mm to 2mm.
- Locate the adjustment dial on the trimmer body, usually below the blade assembly.
- Rotate the dial to select your desired cutting length. The available settings are typically marked on the dial (e.g., 0.8mm, 1.4mm, 2.0mm).
- Ensure the dial clicks into place for the selected setting before use.
Image: Close-up of the fine-tuning blade adjustment dial, showing the various length settings from 0.8mm to 2mm.
Trimming:
- Ensure your hair or beard is clean and dry before trimming.
- Hold the trimmer with the blade flat against the skin or at a slight angle, depending on the desired cut.
- Move the trimmer slowly against the direction of hair growth for an even cut.
- For detailed work or shaping, use the trimmer without a comb attachment (if applicable) and adjust the blade to the shortest setting.
Maintenance and Cleaning
Regular cleaning ensures optimal performance and extends the lifespan of your trimmer. The Enchen Hunter is waterproof, allowing for easy cleaning.
- Switch Off: Always turn off the trimmer before cleaning.
- Remove Hair: Use the provided cleaning brush to remove loose hairs from the blades and the trimmer head.
- Rinse Blades: Since the trimmer is waterproof, you can rinse the blade assembly under running water. Ensure the water is not excessively hot.
- Dry Thoroughly: After rinsing, shake off excess water and allow the trimmer to air dry completely before storing or recharging. Do not use cloths or abrasive materials on the blades.
- Lubrication (Optional): Periodically, apply a small drop of clipper oil (not included) to the blades to maintain smooth operation. Turn the trimmer on for a few seconds to distribute the oil.
- Storage: Store the trimmer in a dry, cool place, away from direct sunlight.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Trimmer does not turn on. | Battery is depleted. | Charge the trimmer fully. |
| Trimmer pulls hair or cuts poorly. | Blades are dull or clogged with hair. | Clean the blades thoroughly. Consider lubricating the blades. |
| Trimmer makes unusual noise. | Blades are not properly aligned or lubricated. | Clean and lubricate the blades. Ensure the blade assembly is correctly seated. |
| Charging indicator light does not turn on. | Charging cable or power source issue. | Check the USB cable connection and try a different USB power source. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | Hunter |
| Dimensions (LxWxH) | 22 x 8 x 7 cm |
| Item Weight | 400 g |
| Battery Type | 1 Lithium Ion (included) |
| Run-time | Up to 120 minutes |
| Power Source | Battery Powered (Cordless) |
| Blade Material | Titanium and Ceramic |
| Cutting Length Adjustment | 0.8mm to 2mm |
| Special Features | Waterproof, Low Noise (<55dB) |
| Manufacturer | Enchen, Shenzhen Dynamic8 Technology CO.,LMT. |
| Date First Available | 5 April 2022 |
Warranty and Support
Warranty:
This Enchen Hunter Trimmer comes with a 1 Year Warranty from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects and does not cover damage caused by misuse, accident, unauthorized repair, or normal wear and tear.
Customer Support:
For any product inquiries, technical support, or warranty claims, please contact the importer:
- Importer: Eccentric Enterprises Private Limited
- Contact Number: +91 93541 70767
- Email: support@eccentricindia.com
